It is not always possible to install a washing machine where you want. The best way out of such situations is a mini washing machine built under the sink. Most built-in models differ from standard equipment only in their reduced loading rate and small size. Users often choose these mini-machines, preferring more frequent washing to the inconvenient location of conventional units.
Rating of mini washing machines under the sink
| Place in the ranking | Model | Rating, out of 100 points | Dimensions width, depth and height, mm | Loading, kg | Maximum spin speed, rpm | Cost in rubles |
| Installation under the sink | ||||||
| 1 | Candy Aqua 114D2 | 98 | 511×441x691 | 4 | 1101 | 19001 |
| 2 | Eurosoba 600 | 96 | 461×461x681 | 3,5 | 601 | 42001 |
| 3 | Candy Aqua 135D2 | 95 | 511×461x701 | 3,5 | 1001 | 17501 |
| 4 | Zanussi FCS 825C | 94 | 511×511x671 | 3 | 801 | 44001 |
| 5 | Electrolux EWC 1350 | 94 | 501×511x671 | 3 | 1301 | 52001 |
| Under-table installation | ||||||
| 1 | LG F-1096ND3 | 98 | 601×441x851 | 6 | 1001 | 21501 |
| 2 | SIEMENS WS 12T440 | 97 | 601×451x851 | 7 | 1201 | 28001 |
| 3 | Electrolux EW6S4R06W | 96 | 601×381x851 | 6 | 1001 | 20001 |
| 4 | Hotpoint-Ariston VMSG 601 B | 95 | 601×401x851 | 6 | 1001 | 18501 |
| 5 | Bosch WLG 24261 | 94 | 601×401x851 | 5 | 1001 | 21501 |
Varieties
At the moment, the product market presents to the buyer a wide variety of models of washing machines. Let's look at the most interesting of them.
Manual
This type is a small mechanical device that does not need to be connected to a water supply or connected to an electrical network. An ideal option for those who enjoy frequent trips to nature.
Strengths:
- Extremely miniature, will not take up much space even in the most compact trunk;
- The only condition necessary to use the device is the presence of some supply of water or a reservoir nearby;
- Easy to operate;
- Suitable for delicate washing.
Weak sides:
- When purchasing this device, you must be prepared in advance for the fact that you will have to turn the handle or press the pedal for the entire washing cycle;
- Lack of spin and dry modes;
- The need to independently heat water.
Semi-automatic
Such models are the most suitable option for residents of rural areas, because they only require an electrical connection.
The device pleases:
- Affordability;
- Ease of operation;
- Rare occurrence of breakdowns and malfunctions.
However, the unit:
- Requires independent filling and draining of water not only at the beginning and at the end of the washing cycle, but also for rinsing;
- Requires independent heating of the liquid.
Automatic
Washing machines familiar to everyone, operating according to user-entered parameters, requiring connection to water supply, electricity, and sewerage.
Pros:
- Minimum expenditure of effort by the user, all his actions are limited to loading laundry, adding or pouring detergent, selecting a washing program and starting it;
- High quality washing;
- Large capacity and, accordingly, saving time on cleaning clothes.
Minuses:
- Automatic washing machines are quite bulky and require a lot of space, which you should think about allocating before purchasing;
- Possibility of installation difficulties.
Top loading
This is an automatic model, the hatch for loading laundry is located at the top.
Advantages:
- No need to bend over to load clothes;
- Large drum capacity;
- Brings less discomfort due to minimal noise emitted.
Flaws:
- This model cannot be built into a countertop.
Which washing machine can be installed under the sink?
In small rooms, an installation scheme under the sink is used, in which small-sized automatic washing machines are used. They are compact in size and easy to install in place. In many cases, the washing machine comes with a sink included. When installed in a bathroom, such a tandem significantly saves space.
The main difference from standard models is the size. As a rule, these are low washing machines, with an average height of 60 cm, but not higher than 70 cm. The ideal depth does not exceed 480 mm, and not all machines meet this criterion. Dimensions are of great importance, otherwise the unit will simply stick out, disturbing the interior.
Many people do not want to install compact mini washing machines due to the small load of laundry, averaging 3-4 kg. Instead, narrow machines are purchased, matching in depth with a productivity of 5 to 7 kg. However, they have a serious drawback - excess height. The assembled kit is 95 cm or more, which is not convenient for everyone. But here you already have to choose between productivity and minor inconveniences.
Types of mini washing machines
All small washing machines have minimal dimensions. These are narrow and low devices that combine a unit and a sink. By design, they can be of two types:
- Activator. Old classic version. All processes must be kept under personal control. First, you will need to remove the machine from under the sink, move it to a convenient place, load laundry, add hot water and add powder. Dirty water is drained and clean water is added instead for rinsing. Finally, warm up with a manual push-up. Such a unit cannot be used directly under the sink; it can only be stored. More advanced devices have a second spin tank, but this does not solve all problems, for example, with drying.
- Drums. These high-tech devices have replaced activator models. They are fully automated and require minimal personal involvement. The work processes are started in a few light movements, and at the end all that remains is to remove the slightly damp laundry and finally dry it. Small-sized washing machines that are suitable in size can be easily installed under the washbasin and operated in this position.
Features of choosing a suitable washing machine
A correctly selected unit not only saves space, but also decorates the interior of the room. Since the installation is non-standard, a washing machine under the sink should be selected with the required dimensions. Therefore, the size requirements will be as follows:
- Height. Determined by the size of the sink and its installation location. If you are planning a counter-mounted washbasin, then you can choose a higher machine. In case of insertion into a countertop, the model of the unit should be as low as possible. For the first option, it is easy to choose a device no higher than 70 cm, and then the sink installed on top will be convenient and accessible for all family members.
- Depth. An equally important indicator, since if you make the wrong choice, the car will stick forward and disrupt the overall picture. The whole complex looks aesthetically pleasing when the washbasin hangs slightly over the device. Therefore, it is recommended to choose a device with a depth of up to 50 cm, taking into account protruding parts. More capacious devices are only suitable for inserting into a tabletop.
- Width. Doesn't really matter and is basically the same as standard models. Selected taking into account the specific installation location.
Criterion 1: Installation and Boot Type
Modern automatic machines can be installed separately or built into some furniture. In the second case, the equipment costs much more and is not particularly popular. There is a much wider range of models for individual installations. They can be of any size, with different heights and depths. Therefore, it is always possible to choose a suitable option even for the smallest rooms.
One of the best options is a narrow car with a standard height. It fits perfectly under the countertop and does not require a separate space. In this case, there is no need to select a sink for the washing machine, since the washbasin will be located separately.
When installed under a sink or countertop, there can be only one type of loading - frontal. Vertical models are generally not suitable for these places.
Criterion 2: dimensions and loading
As already noted, the dimensions of the unit are most important when choosing. In different installation options, the permissible dimensions of the products will differ.
Installation under the countertop is possible with the following dimensions:
- Maximum height – up to 850 mm.
- Depth – no more than 450 mm.
- The width can reach up to 600 mm if there is free space.
A model with this size can load an average of 5-7 kg of dry laundry. This is quite enough for a family of 3-4 people.
When a washing machine is installed under a sink, many user reviews state that non-standard parts will be required, such as a siphon. The shape of the washbasin itself is also not the same as usual. With this installation method, more stringent requirements are imposed on the dimensions:
- Maximum height – up to 700 mm. If the machine is taller, then the sink installed on top will add its own size. At such a height, the washbasin will become inconvenient to use, especially for children.
- Maximum depth and width – up to 510 mm. Then the sink will completely block the washing machine and act as a kind of lid with a hole for draining water.
The laundry load rate for such machines is much lower. On average it is no more than 4 kg.
Criterion 3: Programs and other functions
Compact washing machines have almost the same set of functions as conventional models. The most popular options are fast, delicate and economical washing. There are other programs that allow you to customize work with all types of fabrics. However, unlike standard ones, mini-automatic machines are not overloaded with additional functions, many of which are not at all necessary for everyday use.
Attention should be paid to safety during operation. As a rule, many washing machines are protected from voltage surges, leaks and other troubles. It is important to have a child-proof control lock.
Pay attention to the noise level during washing and spinning. This is very important, especially for those who plan to do laundry at night when electricity rates are lowest. In addition to passport data, it is recommended to study real user reviews. To use the night wash function normally, you will need a built-in timer that allows you to delay the start up to 24 hours.
Good, but optional, options include steaming and drying, and the ability to control remotely via a smartphone. These models are much more expensive and can only be installed under a countertop. Other indicators include classes of energy consumption, washing and spinning, the presence of a display, type of control, etc. – are selected by users based on their own preferences. The best thing is not to overpay in vain, but to choose the simplest workable option.
Advantages and disadvantages
Advantages
- The main advantage is saving space in a small bathroom, especially if the area does not exceed 2-3 square meters. This is a solution for bathrooms in Khrushchev-era apartment buildings or small studios, where in the kitchen there is often no room for an additional large unit.
- Since there is a sink here, all water communications are nearby, and there will be no difficulties with connecting hoses and drainage.
- The machine can be easily disguised by being built into a cabinet under the washbasin, which can be closed with beautiful doors. Relevant if you don’t like open appliances or the bathroom is decorated in a classic, eco-friendly or vintage style.
Instagram @_marina_ky
Instagram @pepper_sasha
Flaws
- Most likely, it will not be possible to place a unit with a large tank volume under the sink. But for one person, a couple or a family with 1-2 children, a medium-sized car is quite enough.
- After washing, it is advisable to ventilate the room, so if you have one bathroom in the apartment, you need to take this point into account and think about the use of the bathroom.
- If the machine is closed on all sides by a cabinet, the result is a static structure, the approach to which may be inaccessible. As a result, it will be difficult to move, clean and repair.
- The space under the sink will be occupied. But with proper use of free space, you can easily compensate for it and organize storage.
Instagram @goodsantehspb
Instagram @design_by_idesign
Advantages and disadvantages of the washer-sink tandem
The advantages of compact washing machines manifest themselves precisely in the operating conditions for which they are intended. The undoubted advantages include the following:
- A washing machine with a washbasin significantly saves usable space and space in the bathroom. In addition, the kitchen and corridor are not the most convenient places for connection and safe operation.
- There is no empty space left under the sink itself; the space is used rationally and profitably.
- Lower purchase and operating costs. The cost of compact models is lower than that of conventional ones. A small load of laundry reduces energy costs and water consumption.
- They look original and aesthetically pleasing together with the sink and complement the interior of the bathroom.
Many users in their reviews note the following shortcomings:
- Low washing machines are available in a limited range. It is not always possible to select the most suitable products, either individually or as a set.
- Insufficient loading rate. This disadvantage is known in advance and is relevant only for large families. It should be noted that low-rise washing machines are not designed for washing large items, such as down jackets, bedspreads or blankets.
- Non-standard equipment that cannot always be found quickly.
- Water splashes from washing hands in a sink regularly splash onto the device.
- Drains of non-standard design are prone to more frequent blockages, although reviews on this matter are the most controversial.
Device
The basic parts and operating principles are the same for almost all models and brands of washing machines. The only exceptions are units with vertical loading and units with a drying function.
Here is a list of the main components of the device:
- Housing consisting of panels, top cover and hatch door;
- Control Panel;
- Electronic module;
- Tank and drum;
- Engine;
- Tubular electric heater;
- Water intake system, including valves, water level sensors and some other components;
- Water drainage system: drain sediment, filter and other components;
- Balancing system: springs and shock absorbers.
Some models may contain additional nodes. In some devices they are expressed in simple sensors, in others - in entire systems (for example, a leakage protection system).
Tips for choosing
The choice of any equipment begins with an assessment of the manufacturer. In the case of minicars, the choice is quite limited and difficult. They are mainly produced by the above-mentioned Candy, Eurosoba, Electrolux and Zanussi, and only the first two companies' products are fully suitable for installation under the sink. Other models are deeper - from 51 cm or more. At these sizes, they will not look nice with the sink.
Only sinks with a narrow siphon are suitable for Electrolux and Zanussi products. Due to this, a gap of up to 10 cm appears between both components. Therefore, it is still recommended to install compact, or, in their absence, narrow washing machines.
The main difference between the device under the sink is its compact dimensions, especially in height and depth. The ideal height is no more than 70 cm, and the depth does not exceed 48 cm. Otherwise, the machine will stick out or the sink will rise too high.
Narrow automatic machines are considered the most optimal replacement for compact models. In this case, the load of laundry increases to 5-7 kg, but the height together with the washbasin turns out to be too large - from 950 mm or more. Although, taken as a whole, this design looks very good.
Choosing the right sink is of great importance. If you buy a regular appliance, there will be at least 15 cm of empty space between it and the washing machine. However, for these purposes there are special products with a drain adapted for joint use. Their drainage system is not in the center, as usual, but closer to the wall. Due to this, the sink is compactly and tightly installed on top of the machine.
A technical gap will be required between the wall and the washing machine, since the size of the washbasin will be 10-15 cm larger. Water is supplied to this place and a siphon is installed. The last component should not be installed centrally and should be located above the machine. In the event of a leak, all the moisture will enter the device and cause negative consequences, including complete failure.
The best option is a washing machine with a sink included and all the parts necessary for installation. All components fit together perfectly and all fit together comfortably in the designated space. All that remains is to choose the most suitable product design for this room.
Required tools and materials
When installing the selected plumbing fixtures, you will need a certain set of tools and materials, which should contain:
- marking tools, namely, a tape measure, a square, a plumb level, a compass, a measuring rod, a surface planer and others;
- impact drill;
- clamps and dowels;
- tow (sanitary linen);
- silicone sealant, intended for use in conditions with high humidity;
- tee for supplying cold water to the washing machine;
- a filter for mechanical water purification to prevent premature failure of the washing machine due to the ingress of suspended particles contained in the water;
- ball valve
Required Tools
Installation and connection steps
The main task of installation is convenient and safe operation of both products. Such work requires extreme care and compliance with all rules established by the manufacturer. If you do not have your own experience, it is recommended to invite specialists to ensure that the small washing machine and sink are correctly installed and connected. This is very important, since in case of incorrect independent actions, the warranty on the equipment may be voided. The installation process itself is carried out in several stages.
Stage 1: Selecting and connecting a washbasin
For joint use, the so-called water lily sink, installed above the unit, is best suited. It has a flat bottom and a shallow depth - no more than 20 cm.
The selection of the optimal device is made according to the following criteria:
- The drain system has the correct vertical shape.
- Sinks for washing machines are selected strictly according to size, taking into account communications and other protruding elements.
- The small-sized unit is completely covered with a sink to prevent splashes on its surface.
If the problem of how to choose a washbasin has been solved, it needs to be installed and connected first. Usually, the place is prepared in advance, taking into account the existing communications and the height of the washing machine. The exact installation location depends on the height of the washer, the height of the sink and a small gap between them.
Next, fastening elements - brackets - are installed. They are held in place by bolts that do not need to be fully tightened to allow subsequent alignment of the product in a horizontal position.
Before installing the sink, it is equipped with a mixer. It can be immediately connected to water using flexible hoses. All connections must be tight to avoid leaks. After this, the siphon is assembled and connected to the sewer system. The washbasin drainage system can be connected to the washing machine.
After installing the sink, you need to check the functionality and tightness of the connections. The water supply turns on, after which you need to wait for some time. The water flow should flow freely into the drain and into the sewer. At the same time, it is necessary to ensure that there are no drops or leaks at the joints. If everything works fine, you can install the washing machine.
Step 2: Removing Shipping Bolts
Before installing the machine under the sink, you need to unscrew the transport bolts from it. They are installed for the period of transportation to avoid damage. The kit includes special plugs designed for bolt holes.
The removed bolts must be kept, otherwise the machine will not be accepted if returned without them.
Stage 3: Connecting to communications
Usually communications are already connected to the installation site. In order to connect to them, a standard set of fittings is used, including when installing under a sink. It is necessary to make a tap in the cold water pipe in advance, to which the inlet hose is connected. This area must be easily accessible as the water passes through a filter that requires periodic cleaning or replacement.
Next, connect the drain hose to the sewer. It can also be connected to the sink siphon, if such a connection was initially provided. All connections are made according to the instructions. They must be airtight, otherwise water will flow onto the floor when draining.
Stage 4: Providing power supply
It is very important to connect to the electrical network correctly. Typically, a separate line is allocated for this purpose, protected by a circuit breaker. The outlet must be moisture-proof, since the bathroom is a room with high humidity. In addition, the socket must be connected to a protective ground.
Step 5: Leveling the washer
The washing machine is installed on a flat surface, with a horizontal deviation of a maximum of 2 degrees. Failure to comply with this rule will lead to excessive vibration, and all automation will not work correctly. A level installation can be achieved using a building level; I adjust the height using the legs.
There are special anti-vibration mats that are placed under the car and effectively neutralize unpleasant phenomena.
Stage 6: Furniture installation
Some sinks are initially equipped with a countertop, and the result is a kind of sink, similar to a kitchen sink. If there is space, it can also be installed together with a washing machine, provided that the unit is low and of suitable height.
Bathroom furniture can be wall-mounted or floor-mounted. Cabinets with a built-in sink have proven themselves well, which are excellent for various options for joint installation with machines. A wide variety of such furniture will allow you to make the right choice and beautifully complement the interior.
How to install
If you purchased a small-sized washing machine and sink, then first of all you need to completely install and put the sink into working condition, and only then start working on the washing machine.
Procedure for installing a washing machine under the sink:
- Move the device closer to the washbasin, but do not place it close to the wall, to ensure access to the connection.
- Connect the inlet hose of the machine to the water supply, having previously provided an outlet with a shut-off tap.
- The drain hose of the device is inserted into the free siphon pipe. For reliability, do not forget to lubricate the connection with sealant and press the hose with a clamp.
- Only after you have made all the connections can the washing machine be pushed under the sink and leveled using the leveling feet.
- Then test run the device to make sure the connections are tight.
Installation of the washing machine will go smoothly if you carefully read the included instructions and follow all the instructions contained in it.
Comparison table of characteristics
In addition to the models already discussed, there are other machines with a sink that have similar characteristics. Their main parameters are shown in the table:
| Name | Loading (max), kg | Programs and modes | Spin speed rpm | Dimensions width, depth and height, mm | Washing/spin noise, dB |
| Candy AQUA 1D1035-07 | 3,5 | 16 | 1000 | 511×461x701 | 56/76 |
| Eurosoba 1100 Sprint Plus Inox | 4 | 14 | 1100 | 461×461x681 | 40/63 |
| Zanussi FCS 825C | 3 | 21 | 800 | 511×511x671 | 53/70 |
| Electrolux EWC 1350 | 3 | 15 | 1300 | 501×511x671 | 53/74 |
| Candy Aqua 114D2 | 4 | 16 | 1100 | 511×441x691 | 56/81 |
| Eurosoba 1000 Black and White | 4 | 12 | 1000 | 461×461x681 | 44/61 |
| Zanussi FCS 1020 C | 3 | 16 | 1000 | 501×521x671 | 53/70 |
Voting by our readers
What would you choose or recommend?
"Slavda WS-40PET"
0.00 % ( 0 )
"Renova WS-35E"
0.00 % ( 0 )
"BRAVO WMM-55PG"
0.00 % ( 0 )
"Leran TWM110-25R"
0.00 % ( 0 )
"VolTek "Rainbow" SM-2 Blue"
0.00 % ( 0 )
"Eurosoba 1100 Sprint" (Black&Silver)
0.00 % ( 0 )
"Candy Aqua 135D2"
0.00 % ( 0 )
"Xiaomi MiJia MiniJ Smart Mini"
50.00 % ( 1 )
"Zanussi FCS825C"
0.00 % ( 0 )
Types of shell
There are special types of washbasins designed specifically for use above washing machines, because a standard sink with a deep bottom is not suitable for this purpose.
Water lily
One of the most common options is the water lily shell. They love it for its side height, which reaches about 20 cm. This type is divided into two subtypes:
- Light. It is distinguished by the absence of a hole for the mixer, elegance and compactness. A great option for small bathrooms.
- Uni. It differs from the previous subtype in its larger dimensions and deeper sides.
Built-in or surface mounted
The cost of built-in and overhead models is higher than the cost of water lilies, however, this is fully justified by their stylish and original appearance and ability to fit into any interior of a house or apartment.
Form
The product market provides the buyer with the opportunity to create an even more interesting bathroom design using sinks of different shapes: round, oval, rectangular, with rounded corners.
Manufacturers and models
The price of small automatic washing machines under the sink depends on demand, and it exists only in Russia, so the main production of these devices is also deployed in our country. To some extent, this is the reason for many negative reviews about these devices, especially if they are produced under high-profile brands. Below we have prepared an overview of washing machines suitable for installation under the sink and the most popular on the Russian market, as well as their characteristics:
- size in cm;
- weight in kg;
- cost in thousands of rubles.
| Model | Characteristics | Description | |
| Bosch WLG 24260 OE | Height, cm | 85 | This Bosch under-sink washing machine has a rather high price and good capacity for its class (5 kilograms), so it is suitable even for a small family. The machine is very tall, so you will have to buy a special sink and install it a little higher. The unit supports 14 washing modes, so you can choose the appropriate mode for any laundry. When vibrations appear during spinning, the machine independently changes its operating algorithm and tries to redistribute the laundry throughout the drum, and if this does not help, it reduces its rotation speed. Despite the slightly worse build quality than the original Bosch washers, most reviews about this unit are positive. |
| Width, cm | 60 | ||
| Depth, cm | 40 | ||
| Weight, kg | 65 | ||
| Cost, rub | 23000 | ||
| Model | Characteristics | Description | |
| CANDY CS3Y 1051DS1-07 | Height, cm | 85 | The Candy under-sink washing machine is a good choice for those who do not want to overpay. After all, the cost of these household appliances is noticeably lower than that of more branded competitors, for example, Bosch. Despite the fact that the capacity of this device is 5 kilograms, it cannot be loaded with more than 2 kilograms of silk or 1 kilogram of wool. The machine supports 16 washing programs; according to the manufacturer, it controls drum vibrations and regularly conducts self-diagnosis. This machine has received a lot of negative reviews related to the poor performance of the vibration control system, so not everyone is happy with it. If you are going to buy a Kandy washing machine for your sink, we recommend that you do not neglect negative reviews so as not to be disappointed later. |
| Width, cm | 60 | ||
| Depth, cm | 35 | ||
| Weight, kg | 60,5 | ||
| Cost, rub | 15000 | ||
| Model | Characteristics | Description | |
| LG F12U2HDS5 | Height, cm | 85 | If you need a good and powerful LG under-sink washing machine, then this is the F12U2HDS5. This unit can be installed under a special sink, because the height of the machine is 85 cm. Thanks to its shallow depth, it will not protrude relative to the sink, and the spacious drum can wash 7 kilograms of laundry at a time. This equipment costs a lot, but most reviews about it are positive - the unit is distinguished not only by its performance, but also by its reliability and convenience. 14 washing programs, automatic detection of the weight of laundry in the drum, vibration control - all this is just a small part of the capabilities of this device. |
| Width, cm | 60 | ||
| Depth, cm | 45 | ||
| Weight, kg | 62 | ||
| Cost, rub | 34000 | ||
| Model | Characteristics | Description | |
| Zanussi FCS 825 C | Height, cm | 67 | This is one of the few washing machines under a sink with a height of 60 cm. Thanks to this, the machine can be placed under a sink with a regular siphon. To reduce vibrations, the manufacturer limited the drum rotation speed to 800 rpm, which is noticeably lower than most analogues. Because of this, the laundry comes out a little more damp, but the washing and spinning are much quieter than with most other washers. This Zanussi under-sink washing machine is not cheap, but for the money you get a reliable unit with a capacity of 3 kilograms, which is much quieter than most washing machines and is reliable. |
| Width, cm | 50 | ||
| Depth, cm | 55 | ||
| Weight, kg | 52 | ||
| Cost, rub | 34000 | ||
Related article:
Which brand of washing machine is better? When starting to make a choice, you need to decide which model of equipment is better and of higher quality. This is the question we will try to understand in detail in this review.
Sinks above the washing machine - overview of models and prices
Countertop sinks differ in:
- sizes;
- method of fastening;
- style;
- blossom.
The size and shape of sinks must comply with this standard
The width of most washing machines is 60 cm, so the sink with a countertop under the washing machine should be the same width or 2 times wider. These countertops are available in two main versions – with one or two sinks. In the first case, it is an ordinary sink, and on the side there is space for a washing machine; in the second case, there are two sinks on one countertop, one of which is special, with a rear water drainage. The second sink can be either regular or special. After all, a special plumbing fixture for a washing machine does not drain in the center, but next to the wall, so it does not interfere with the washing machine. In addition, there is the installation of a sink and countertop, for example, a stone sink and a ceramic or earthenware countertop.
Advice! If the width of the room allows, then a sink and washing machine under one countertop is the optimal solution, because there is enough free space under the sink to service the siphon and connect the washing machine. This design does not have to be disassembled or moved away from the wall for maintenance.
A sink with a countertop is more convenient - you can put something on it
In order for the entire structure to look harmonious and fit beautifully into the interior, you need a properly selected sink for the bathroom under the washing machine. This applies not only to color or shape, but also to style. However, everyone’s tastes and perception of what is beautiful and harmonious are different, so be guided by your feelings - do you like it, will it be convenient for you to use such a sink, will you have enough money to buy it? After all, beautiful countertop sinks cost tens of thousands of rubles. Here are examples of some examples of such shells.
Table 1 . Models of sinks above the washing machine
| Model | Photo | price, rub. | Description |
| LaufenIno 90 cm | 30000 | Porcelain, combined with a tabletop-shelf, depth 45 cm | |
| Belux Eureka 60 | 20000 | Made of artificial marble, width and depth 60 cm | |
| Santek Pilot 50 | 3500 | Earthenware, Russian production, width 61.5 cm, depth 50 cm, height 15 cm |
Bathroom furniture for washing machine
Furniture for a washing machine with a sink forms a single interior detail, so various cabinets, cabinets and chests of drawers are most in demand. In addition to its decorative value, furniture is useful as a storage area for various small items - toothbrushes, washing powder and much more. Furniture differs in:
- color;
- style;
- method of fastening.
Bathroom furniture
The color of the furniture is chosen based on the color of the bathroom, so manufacturers offer each element in different colors. In stores you can buy a cabinet with a sink for a washing machine, as well as a separate cabinet, sink and other elements. For example, the Russian Lotos series includes a sink with a countertop and a cabinet made of plastic or stainless steel. The cost of such a kit is 25–35 thousand rubles, depending on the size.
Furniture differs in style, because some people like vintage, antique interiors, while others like modern ones. One person is satisfied with a cabinet with a sink above the machine, while the other needs various hanging drawers and a mirror. Manufacturers meet halfway and produce individual elements that can be easily formed into various sets. In addition, all furniture is divided into wall-mounted and floor-standing. The first one is hung on the wall using special fasteners, and the floor one stands on small decorative legs. In general, if you have a small washing machine, the box under the sink will harmoniously fit it into the interior of the room.
This is what the washing machine cabinet looks like under the sink
Under-sink washing machine complete with sink
Buying all the components separately is difficult because it is not always possible to find components that match in color or style. In addition, the price of a washing machine with a sink as part of a set turns out to be slightly less than when all the elements are purchased separately. This often becomes a decisive factor, because the main buyers of these devices are people who own a small living space. For large living areas, the optimal choice is not a set of washing machine with a sink, but a free-standing model. An inexpensive Candy Aquamatic 1D835 with a Russian Pilot 50 sink can be bought for 18–19 thousand rubles. Purchasing such a kit will save you from having to look for a machine and a sink that match each other in size, style and connection method.
The sink washer kit looks beautiful and is easier to connect.
Related article:
How to clean a washing machine with citric acid. Let's look at how to clean a washing machine with citric acid and other available products to increase the life expectancy of the equipment.
What to look for when choosing?
The main selection criterion is dimensions. The height of mini electrical equipment does not exceed 67-70 cm. The depth varies in the range from 44 to 51 cm, but the width can reach 55 cm. The secret of the right choice lies in the nuances:
- After installation, equipment should not protrude beyond the sink, especially in front;
- when connecting the drain and hose for water intake, kinks and pinches must not be allowed (from the wall to the back panel of the electrical appliance there must be at least 10 cm);
- installation of the sink should not interfere with the installation of the sink siphon; bends and turns should not be allowed.
A washing machine installed under the sink provides comfort and space saving. The equipment is designed to ensure correct installation and connection of pipes. Therefore, size is the main selection criterion.
If after installation it is uncomfortable to use a sink or electrical appliance, it means that the choice was made incorrectly. This will affect the service life of the unit and the comfort of using the sink.
Having calculated the dimensions, we begin to search for a model using other criteria:
- basic options;
- auto programs;
- additional functions;
- loading hatch size;
- intuitive control panel;
- power;
- design, manufacturer.
Don't forget that a bathroom can be both spacious and beautiful. Manufacturers of household appliances and plumbing fixtures release models of various colors, geometries, and styles to the market.
