TOP 15 best pumps for a well: 2021 rating and which centrifugal pump to choose for water supply at home

Well pumps are used in private areas to automate the intake of water from a well to provide all household needs. But what should you consider when choosing such a device?

Which manufacturers have proven themselves to be the best?

Which well pumps are highly rated by experts and buyers?

We have compiled our own rating of the most popular models in terms of price/quality ratio, taking into account their technical features, advantages and disadvantages.

Rating of the TOP 15 best pumps for wells 2020-2021

KARCHER BP 1 Barrel

This pump model allows you to water your garden with warm water. The flexible mount securely holds the device on the edge of the well. The unit can be equipped with a float switch, which will automatically “force” it to stop working if the water level has reached a critical level.

The device is lightweight and made of high-quality plastic.

The only drawback is that the bottom filter is not securely attached to the housing.

How to choose a well pump for water supply at home?

When choosing a pump for your well, you should consider the following parameters:

1. Productivity . The main indicator that gives you an idea of ​​the amount of water to pump under ideal conditions. This also allows you to determine how many points the pump can be connected to.
2. Depth . Indicates from what depth in the well the pump will draw water. Focus on the depth of your well/well.
3. Maximum pressure . The characteristic indicates to what height and distance the pump is capable of supplying water from the well. This takes into account the depth of immersion and the distance of the feeding point from the device itself.
4. Filter . Before purchasing, be sure to assess the degree of contamination of the water in the well. There are pumps that are resistant to mechanical impurities, and there are models designed only for clean water.

Table of advantages and disadvantages - which is better, a pump or a pumping station for a well

TOP 5 best well pumps by price/quality for 2021

Grundfos SBA 3-45 A

Italian well pump with thoughtful functionality and good power of 1050 W.

The pump is very easy to install, all control elements are located inside the housing, so to get started you just need to connect the device to the network.

The mechanism stops immediately after the pump reaches the required pressure . When the latter falls, the pump is activated again. The manufacturer indicates that when installing a hydraulic accumulator, you can get a full-fledged pumping station.

The device managed to provide all the necessary protection, including protection against overheating and dry running.

And thanks to the float switch, the device will turn off if the water level drops to critical.

To make the unit lighter and cheaper, the body was made of composite material.

At the same time, the brand did not skimp on the internal mechanism. For example, both the input filter and the electric motor sleeve were made of stainless steel.

Main characteristics:

1. Immersion depth, m - 10.
2. Pressure (max), m - 45.
3. Throughput, cubic meters m/hour - 3.
4. Power - 1050.
5. Passable particles, mm - 1.
6. Maximum temperature - 40 degrees.
7. Noise level - 50 dB.

pros

• a complete protection system;
• good performance;
• low noise level.

Minuses

• outlet fitting made of plastic.

Aquario ASP2-25-100WA (620 W)

The model refers to submersible pumps for vertical installation to pump cold water from wells, open sources or wells with a diameter of at least 15 cm.

Recommended for private water supply systems. Immerses to a maximum of 15 meters, the pressure does not exceed 40 meters. Filters well, not allowing particles larger than 0.5 mm in diameter to pass through.

The housing is made of stainless steel, as are the main elements of the engine . There is no special cooling system; during prolonged operation, the temperature of the engine is reduced by a jet of water.

But protection against dry running is provided by installing a float switch that controls the water level in the well/source . Use in shallow sources with partial immersion of the body is also allowed.

Main characteristics:

1. Immersion depth, m - 15.
2. Pressure (max), m - 40.
3. Throughput, cubic meters m/hour - 3.
4. Power - 620 W.
5. Passable particles, mm - 0.5.
6. Maximum temperature - 35 degrees.
7. Noise level - 56 dB.

pros

• does not make noise during operation;
• good performance indicators;
• reliable engine design;
• cable for 20 meters and a remote-type starting block.

Minuses

• not suitable for deep sources.

DAB DIVERTRON 1200 M (1100 W)

The unit is capable of supplying water to a private home even from a deep well . For 45 meters

he gains 10 liters per minute of ascent, and with a ten-meter rise he can manage more than 80 liters. The work is carried out independently due to built-in automation.

There are built-in pressure and flow sensors.

Stability is well ensured even with changes in water consumption, so installing a hydraulic accumulator is not a mandatory item.

Do not be afraid of the engine overheating during prolonged operation; it is cooled by the flow of water.

However, this well pump also has disadvantages.

When creating the model, much more plastic was used than we would like, and the pump does not tolerate voltage drops well, so you should take care of the stabilizer in advance.

Keep in mind that the manufacturer did not install a float switch, so the level must be monitored.

Main characteristics:

1. Immersion depth, m - 12.
2. Pressure (max), m - 46.
3. Throughput, cubic meters m/hour - 5.7.
4. Power - 1.1 kW.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 64 dB.

pros

• good performance, suitable for deep wells;
• reliable pumping part;
• stable operation of automation.

Minuses

• does not react well to power surges;
• a lot of plastic parts.

GILEKS Water cannon PROF 55/75 A (900 W)

One of the best centrifugal well pumps in our rating for its performance.

Made to provide a private home with clean drinking water from a well, borehole or natural source.

The maximum pressure reaches 75 meters, and the pump can be immersed to a depth of thirty meters.

This well pump can be equipped not only with an automated water supply system, but also with a watering or irrigation system.

Another feature of this model is that it can pump water even from those sources where the suspended sand content is estimated at two kilograms for every cubic meter of liquid.

All heated engine elements are protected from overheating and subsequent wear by a stream of water washing them. Thanks to this, the pump also does not submerge completely.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 75.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 900 W.
5. Passable particles, mm - 1.5.
6. Maximum temperature - 40.
7. Noise level - 57 dB.

pros

• excellent performance;
• quiet operation;
• reliable design that is not afraid of overheating;
• Can be used in sources with high sand content.

Minuses

• not detected.

VORTEX VN-15N (280 W)

Well pump for top water intake, with small size and high quality aluminum alloy body.

It has a pressure of up to 72 meters, a vibration operating principle and produces up to 18 liters per minute, so this pump is perfect for watering, irrigation and other household needs in a summer cottage or garden.

Reliable assembly indicates a long service life . The unit is designed to work with clean water without a high content of sand and other mechanical impurities.

There is good motor overload protection, and special holes at the bottom provide access to the motor for cooling.

The pump is immersed in a well or borehole with a diameter of 10 cm to a depth of no more than three meters.

To make it convenient to raise and lower the device, it was equipped with special ears for threading the cable. One of the obvious shortcomings is that the manufacturer did not take care of protection against dry running.

Main characteristics:

1. Immersion depth, m - 3.
2. Pressure (max), m - 72.
3. Throughput, cubic meters m/hour - 1.08.
4. Power - 280 W.
5. Passable particles, mm - 1.5.
6. Maximum temperature - 35.
7. Noise level - 57 dB.

pros

• excellent option for watering;
• low noise level;
• good pressure.

Minuses

• no protection against dry running;
• The bolts rust quickly and require regular replacement.

Criteria for choosing the optimal model for installing a water supply system

In order for the pump to perform its functions over a long period, it is necessary to correctly select the device depending on the purpose of its use. There are a number of important factors to consider.

1. Productivity . It determines the amount of water that the electric unit is able to pump per unit of time. The value must be selected with some margin in relation to the simultaneous consumption by all points of intake (sink, shower, bathroom, washing machine, etc.).
2. Suction depth. It is determined by the distance between the pump body and the lower boundary of the well from which water can be raised.

   
   Suction depth is also important

3. Liquid pressure . The parameter is measured in meters of water column and represents the distance (vertical) between the location of the pump and the location of the upper consumer.
4. Operating efficiency , which determines the efficiency of the equipment.
5. Electric motor power and energy consumption of pumping equipment . The amount in the bill for consumed electricity depends on this indicator, so it is worth paying attention to it.
6. The maximum value of water flow pressure at which the pump will operate in normal mode.
7. Availability of additional options. It is important to pay attention not only to the main characteristics of electrical appliances, but also to other, no less important nuances on which the reliability of the equipment in operation and its service life depend: - the service life of electrical equipment is largely determined by what protective systems it is equipped with. The best models have several important options: protection systems against idle operation, overheating, network overloads and impeller displacement; - smooth start of the motor. This function allows you to reduce wear on the power unit and extend the life of the pumping equipment; — dimensions and weight of the pump. Compact dimensions and low weight increase ease of installation.

   
   Submersible pump Grundfos DP series 10.50.09.Ex.2.1.502

8. Type of water intake . Devices are available with lower and upper options. In the first case, it is important that during operation there is no siltation of water at the bottom of the well. The upper intake is more reliable, however, when the water level drops to a certain level, the pump will stop working (if there is an appropriate sensor).
9. Cost of products . Despite the fact that the price of products from well-known manufacturers is often quite high, when choosing a pump, it is recommended to pay attention to models from factories whose quality of equipment has been tested by time. In this case, the savings are not very justified. Cheap equipment often breaks down, and its repair can cost an amount comparable to the cost of a new unit.

After conducting a thorough analysis of the submersible electric pump market and choosing the right model, you can be sure of its long, reliable and economical operation. To purchase a pumping unit, you need to have an idea of ​​what basic characteristics it should have and first evaluate the most important parameters.

How to calculate the required water pressure

To determine this value, you need to know the suction depth, the length of horizontal pipes and the lift height (to the highest point of consumption).

Important! 1 meter of pressure that the unit creates in a vertical pipeline is equal to 10 meters horizontally.

Calculation of a submersible pump for a well
Example of calculation of pressure (N). It is necessary to ensure the supply of water from the well to the house.

• the distance from the pump location to the lower boundary of the water level is 10 m;
• the length of the horizontal pipeline is 20 m (it is equivalent to 2 m of pressure);
• the distance from the ground surface to the highest point of water consumption is 3 m.

To determine the required pump pressure, you need to add these values. The result is H = 15 m. To the resulting value you need to add 20 m to compensate for various types of losses. As a result, it turns out that to supply water to the facility, a pump with a pressure of at least 35 m .

Submersible pumps

Calculation of pump performance

Correct determination of this parameter will make it possible to uninterruptedly supply all consumers with water even during peak loads. To determine the required characteristic, you need to know the instantaneous water flow to supply all water intake points.

Table. Water consumption standards.

The required indicator is determined by summing the one-time water consumption of all points.

Video - How to choose a submersible pump?

TOP 5 best inexpensive well pumps

PATRIOT VP-10 (300 W)

This unit belongs to submersible pumps with a vibration operating principle . Counts,

that it can be used in shallow wells, containers, natural springs, immersing no more than seven meters.

In this case, the maximum pressure of 30 meters is maintained.

However, many users indicate that the pump can be immersed 10-15 meters, losing half the volume of maximum pressure.

An excellent assistant for creating a watering or irrigation system, since in a horizontal position water is pumped over long distances.

There is protection against engine overheating and accidental dry running when the level in the well/barrel/source is not sufficient.

The body of the device is made of stainless steel, so the service life is much longer than that of similar pumps with a predominance of plastic.

Main characteristics:

1. Immersion depth, m - 7.
2. Pressure (max), m - 30.
3. Throughput, cubic meters m/hour - 1.08.
4. Power - 300 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 54 dB.

pros

• well suited for watering or irrigation;
• dives to 10-15 meters;
• low power consumption.

Minuses

• short power cord.

KARCHER BP 1 Barrel (400 W)

This model for a well can be considered as a modern alternative to the classic method of irrigation.

Using this pump, you can water the beds with settled warm water (including rainwater), but without tiring travel with a heavy watering can.

The pump is equipped with a special flexible mount that will hold it on the edge of the well and is compatible with any container.

The kit also includes a float switch so you don't have to monitor the level yourself.

The float switch allows you to control the water supply and in this way protects the internal mechanism from dry running.

During long-term operation, the engine is cooled by a stream of pumped water.

The user can install the mount at the desired height of the container, from where water will be pumped. Users recommend using this device in conjunction with a barrel or vat.

Main characteristics:

1. Immersion depth, m - 7.
2. Pressure (max), m - 11.
3. Throughput, cubic meters m/hour - 3.8.
4. Power - 400.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 57 dB.

pros

• very light, made of high quality plastic;
• does not irritate with noise during operation;
• excellent option for watering.

Minuses

• The bottom filter is loose.

LIVGIDROMASH Malysh BV-0.12-40-U5 10 m (240 W)

Vertical well pump with vibration mechanism.

Manufactured at a former well-known site, designed for placement in deep wells.

One of the most inexpensive models for a well with the simplest device, so you will have to monitor the water level and engine overheating yourself.

On the positive side, it is a small, compact device with a powerful winding (much better than previous models) and low power consumption.

This option is unlikely to be suitable for a private house, but for a dacha it is an excellent option. It pumps liquid well over long horizontal distances, which means it is suitable for irrigation. Not picky about mixtures.

At maximum performance, the pump provides up to 25 liters per minute . A well-assembled case will last for many years if the operating rules are followed.

Main characteristics:

1. Immersion depth, m - 3.
2. Pressure (max), m - 40.
3. Throughput, cubic meters m/hour - 1.5.
4. Power - 240 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 55 dB.

pros

• the best budget option for watering;
• reliable design;
• good performance;
• low power consumption.

Minuses

• Vibration decoupling of the mount is required due to significant vibration.

UNIPUMP BAVLENETS BV 0.12-40-U5, 40m (245 W)

Reliable model with excellent performance, stainless steel body and small size.

Suitable for placement in sources with a diameter of at least 10 centimeters, works with clean drinking water.

The pump can be submerged to a depth of 40 meters, and the maximum pressure reaches 80 meters . More than 1.5 cubic meters are produced per hour. meters of drinking liquid.

At the same time, the energy consumption of the device is minimal; it can be connected to solar or gasoline generators with a power of 0.5 kW or more.

The coils have copper windings, which reduces engine heating . The aluminum alloy body is corrosion-resistant, which means the pump will last a long time.

The manufacturer makes all rubber parts from natural rubber, so no harmful substances or impurities get into the water.

For ease of installation, the pump is equipped with eyes for attaching a cable.

Main characteristics:

1. Immersion depth, m - 40.
2. Pressure (max), m - 80.
3. Throughput, cubic meters m/hour - 1.6.
4. Power - 245 W.
5. Passable particles, mm - 0.5.
6. Maximum temperature - 35 degrees.
7. Noise level - 56 dB.

pros

• light weight and size;
• high-quality assembly;
• high performance;
• power cord 40 meters;
• low energy consumption.

Minuses

• not detected.

GILEKS Water cannon PROF 55/35 (460 W)

Submersible model for placement in both natural and artificial sources with sufficient water level.

Suitable for working with sand-filled wells, a special bottom filter does not allow fractions larger than 1.5 mm to pass through, that is, the pump pumps water containing several kilograms of sand in suspension without harming itself.

This pump is suitable for irrigation and other household needs . However, the internal elements are also suitable for use with drinking water.

The model is not a noisy device and is quite economical in terms of energy consumption.

The maximum pressure is 35 meters, immersion is carried out up to 30 meters . The case is made of stainless steel, resistant to impact.

This pump will last a long time. And thanks to a ten-meter cable, it is often possible to refuse to use an extension cord.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 460 W.
5. Passable particles, mm - 1.5 mm.
6. Maximum temperature - 40 degrees.
7. Noise level - 60 dB.

pros

• low noise level during operation;
• long cable;
• pumps quickly at great depths;
• not afraid of sand.

Minuses

• not detected.

Rating of submersible pumps

The rating includes the best submersible pumps that have passed a strict selection process. All models received high quality ratings from experts and a large percentage of positive reviews from ordinary users. The selection took into account compliance with the following key parameters:

• Power;
• Performance;
• Water level control;
• Lifting height;
• Pumping range;
• Maximum pressure;
• Destination category;
• Nominal weight;
• Installation method;
• Protection against overheating, dry running;
• Case material;
• Functionality;
• Noise level;
• Working temperature.

Safety characteristics, cost, and warranty period were also taken into account. The pros and cons of each individual model were considered. As a result, the best nominees were divided into three application categories.

The best pumps to increase water pressure

TOP 5 best powerful pumps for wells

DAB DIVERTRON 1000M (650W)

This well pump model from an Italian manufacturer is very popular among owners of private houses, cottages and cottages..

No special accessories are required for installation, and the device is fully automated. A pump is used to pump clean drinking water.

The body is made of high quality technopolymer, and the main engine components are made of stainless steel.

This is how it was possible to reduce the weight of the model without sacrificing performance, which is estimated in the range from 0.3 to 5.7 cubic meters per hour. At the same time, the maximum jet pressure is 36 meters.

The pump is almost silent in its operation and is installed in wells with a diameter starting from 15 cm.

The device can also be used to organize irrigation or quickly pump water into the reservoir.

The entire system is protected from overheating, overload and dry running . For the latter, the pump was equipped with a float switch, which will prevent it from starting if the level is insufficient.

Main characteristics:

1. Immersion depth, m - 12.
2. Head (max), m - 36.
3. Throughput, cubic meters m/hour - 5.7.
4. Power - 650.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 57

pros

• lightweight but reliable;
• there is protection against dry running;
• good performance;
• low noise level.

Minuses

• does not tolerate power surges; installation of a stabilizer is required.

Grundfos SBA 3-35 A

The pump is manufactured in Italy and is designed for pumping clean water from wells for private water supply or from rainwater tanks/irrigation tanks.

It can also be installed to increase pressure in the water supply system, supply water for household appliances or watering/irrigation.

The well pump is equipped with a float switch for automatic operation . It can also be used as protection against dry running.

The model can be restarted using the remote control panel included in the package.

There is thermal overload protection.

If the engine elements overheat, the system will stop the pump to prevent damage.

After the temperature drops, the device will restart itself. In an hour, the pump can carry out up to 20 starts, pumping up to 3 cubic meters. In this case, the maximum pressure reaches 35 meters.

Main characteristics:

1. Immersion depth, m - 10.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.
4. Power - 800 W.
5. Passable particles, mm - 1 mm.
6. Maximum temperature - 40 degrees.
7. Noise level - 50 dB.

pros

• good protection system;
• high performance indicators;
• stainless steel body, which is not afraid of rust;
• quiet work.

Minuses

• short power cord.

GILEKS Water cannon PROF 55/50 A df (600 W)

We can safely recommend this model as a reliable well pump for providing water to a private home, cottage or garden..

In this case, the immersion depth reaches 30 meters. Thanks to the placed float switch, this pump can be placed in both natural and stationary sources where there is a sufficient water level.

The maximum pressure is 50 meters . The model works with a clean liquid, in which sand fractions with a diameter of 2 mm can be found. To filter them out, it is enough to install a bottom filter.

The model is resistant to various damages thanks to the case made of high-quality stainless steel.

All internal parts of the pump are assembled from elements that can come into contact with drinking water.

During long-term operation, the engine is cooled by the water that is pumped; there is protection against dry running and overheating.

The service life of the pump is significantly extended due to the double seal. And to make the model easy to install, the manufacturer has provided special lugs for threading the cable.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 50.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 600 W.
5. Passable particles, mm - 2.
6. Maximum temperature - 35 degrees.
7. Noise level - 60 dB.

pros

• long service life;
• There are both automatic and manual operating modes;
• for deep wells;
• long cord;
• pumps quickly.

Minuses

• not detected.

Aquario ASP2-40-100WA (750 W)

A high-quality, reliable well pump model that is used in private water supply systems.

Pumps clean cold water (up to 35 degrees) after placement in wells or wells with a diameter of 15 cm.

The pump can submerge to fifteen meters, with a maximum pressure of up to 70 meters, carrying out up to 30 starts per hour and pumping about 3 cubic meters.

The device operates almost silently and performs well when organizing watering or irrigation.

The sand content in water should not exceed 180 grams per cubic meter.

The housing and main parts of the motor are made of stainless steel and are wear-resistant, which allows the pump to be used for many years.

There is a float switch as protection against dry running, a remote control is also included, the length of the network cable is 25 meters. For high-quality operation, it is recommended to install a voltage stabilizer.

Main characteristics:

1. Immersion depth, m - 15.
2. Pressure (max), m - 70.
3. Throughput, cubic meters m/hour - 3.
4. Power - 750 W.
5. Passable particles, mm - 1.
6. Maximum temperature - 35 degrees.
7. Noise level - 54 dB.

pros

• good pressure;
• long cable for connection;
• works without noise;
• up to 30 starts per hour.

Minuses

• requires voltage stabilization.

GILEKS Water cannon PROF 55/35 A (460 W)

Another model from this manufacturer, designed for installation in wells and natural springs with clean water with a diameter of 150 mm or more.

The pump delivers up to 55 liters per minute, and the maximum pressure reaches 35 liters. The pump pumps 3.3 cubic meters per hour. meters, consuming no more than 460 W.

This pump is ideal for irrigation and watering, as it demonstrates good performance when pumping water horizontally and is not afraid of high sand content (up to 2 kg per cubic meter).

All thanks to the included filter, which protects the system from clogging even when the pump is installed at the bottom of the source.

The main parts of the engine are made of stainless steel; in case of overheating, the protective system stops the pump until it cools completely. There is also protection against overload or starting the pump when the water level is low.

Main characteristics:

1. Immersion depth, m - 30.
2. Pressure (max), m - 35.
3. Throughput, cubic meters m/hour - 3.3.
4. Power - 460 W.
5. Passable particles, mm - 2.
6. Maximum temperature - 35 degrees.
7. Noise level - 57 dB.

pros

• quiet operation;
• economical energy consumption;
• Suitable for deep wells.

Minuses

• short cable for connection.

Inexpensive models (up to 2000 rub.)

LIVGIDROMASH Malysh-M BV 0.12-40 16m

pros

• Cheapness
• Compactness
• Light weight
• Functionality

Minuses

• Not suitable for deep wells due to low power

From 1,700 ₽

A small and convenient pump with a top water intake that weighs only 3.4 kg. The immersion depth is 3 m. In this case, the maximum pressure can reach 60 m. The device is installed in the water in a vertical position. Power cord length 16 m.

LEPSE Aquarius-3 10m

pros

• Rubberized body
• Quality materials
• Light weight
• Low cost

Minuses

• Poor performance
• Noisy when working

From 1,800 ₽

A budget-friendly vibration pump, well suited for pumping water from a river. The immersion depth can reach 40 m. The throughput is small: only 1 cubic meter. m/hour. But for simple tasks this is quite enough. The device has a self-resetting fuse and a special suspension in the form of a cable.

Mini device

There are two types of shower-pump for a summer residence on the product market.

The first option is a small device operating at a voltage of 12 volts. Using an adapter, the device is connected to the car. There are also options that run on regular batteries.

The second option allows you to combine water treatments with physical exercise. The feet press on the cavities (mat), water enters the hose and “waters” the person. The more intense the footwork, the stronger the water pressure.

A similar operating principle is reflected in the very name of the device. They call him "Toptun".

Grundfos SBA 3-35 A

• Power – 620 W.
• Rated speed – 2800 rpm.
• Maximum installation depth is 10 m.
• Productivity – 3 m3/h.
• The diameter of solid fractions is 1 mm.
• Water temperature – from 0 to +40 ºС.
• Network cable length – 15 m.
• Weight – 9.69 kg.

Grundfos SBA 3-35 A is a productive pump made in Italy, which is distinguished by high quality workmanship. The construction materials used are exclusively high-strength composite polymers and stainless steel, which are resistant to corrosion even with prolonged contact with moisture. The built-in mesh filter effectively captures solid fractions, which protects the pump impeller from mechanical damage, ensuring a long service life.

The pumping unit is ready for use immediately after purchase, which avoids additional costs after purchasing the device. The model is equipped with a float device that controls the operation of the electric drive. To ensure safety, there is a built-in dry-running protection that automatically stops the engine if there is no water.

The owners of the device especially note the reliability of the design and the resistance of the electric motor to temperature changes. The rather high cost is fully compensated by the high quality of the pump.