№ | Name | Rating | Nomination |
1 | AGATE L-6.5 | 4.58 | The best ratio of price and quality |
2 | Huter MK-7000 | 4.55 | Most popular model |
3 | BISON MTB-300 | 4.51 | Compact module layout |
4 | Steher GT-300 | 4.35 | Best price |
5 | Hyundai T 1300 | 4.26 | The most reliable walk-behind tractor |
6 | PATRIOT Kaluga M | 4.24 | Best example of co-production |
7 | Aurora COUNTRY 1100 MULTI-SHIFT | 4.22 | Lots of gear |
8 | Neva MB-2KS-(168FA) | 4.13 | Widest track |
9 | Carver MT-701 | 4.09 | |
10 | Denzel DPT-170 | 3.98 |
In modern realities, it is difficult to imagine arable work without the use of motorized equipment. If we are talking about large fields, these are tractors and various plows. In smaller areas, walk-behind tractors are used, which should be selected based on the size of the area being processed. For areas of 10 acres or more, it is recommended to take a device with an engine power of at least 6 horsepower. But this is not the only selection criterion. You should also look at other parameters:
- plowing width of at least 80 centimeters;
- the presence of both forward and reverse speeds;
- pneumatic wheels.
An equally important aspect is convenience and ergonomics, since you will have to spend quite a lot of time using the tool. Accordingly, both the build quality and the components used must be at the highest level. Unfortunately, not all modern manufacturers can boast of such characteristics. Therefore, in order not to accidentally buy a low-quality product, we carefully studied the offers and selected for you the best options that can easily cope with such a complex task as processing 10 acres. Among the presented models there are both world-famous brands and local manufacturers offering decent units without inflating prices for a big name.
Top 10. Denzel DPT-170
Rating (2021): 3.98
11 reviews taken into account from resources: Yandex.Market, All Tools
- Characteristics
Average price: RUB 29,400.
- Country: Germany (produced in Russia)
- Engine power (hp): 9
- Plowing width (cm): 85
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear-chain
- Weight (kg): 53
10 acres for this walk-behind tractor is only a small part of what it is capable of in reality. A powerful 9 horsepower motor can cultivate plots of land of 15, 20 and even 25 acres. Provided that you have enough strength and patience to plow the land with a width of only 85 centimeters in one pass without the possibility of expanding this parameter. In addition, there are only two forward and one reverse speeds, which further increases the time spent. It is not clear why the manufacturer arranged this unit this way, but taking into account all of the above, we can say that it is quite inexpensive. In addition, the German brand is famous for its high build quality.
Advantages and disadvantages
- Very powerful motor
- Relatively inexpensive unit
- Capable of treating large areas
- Strange ratio of parameters
- Narrow gauge
Functionality of the walk-behind tractor
The walk-behind tractor moves on wheels, a pair of which is connected to the drive of an internal combustion engine installed in the structure. Due to its sufficient power, the equipment can be used not only for soil cultivation, but also for transporting goods, provided that a trolley is used; it must be purchased separately. Besides:
- Walk-behind tractors can be equipped with various types of attachments (hiller, cutters, plow). Operating a walk-behind tractor makes it easier to work during planting/harvesting potatoes, mowing grass on the site, and hilling beds. Such equipment can even be used in winter if there is a need to remove snow;
- Depending on the power of the model, cutters are selected for loosening the soil in relation to size and diameter. Note that for units with a capacity of 6-9 hp. You can install large diameter cutters, this will allow you to process the soil to a depth of up to 30 cm.
It is important to understand that the more functions a technique has, the higher its weight, dimensions and power. Multifunctional models are equipped with a gasoline engine with a power of 6 hp or more. The type of equipment in question is a profitable purchase for a private home if it is planned to be used on plots of 8-15 acres.
Top 9. Carver MT-701
Rating (2021): 4.09
20 reviews from resources were taken into account: Yandex.Market, All Tools, 220 Volt
- Characteristics
Average price: 30,000 rub.
- Country: Russia (manufactured in China)
- Engine power (hp): 7
- Plowing width (cm): 108.5
- Number of speeds (forward/reverse): 2/2
- Gearbox type: chain
- Weight (kg): 137
Before us is a relatively inexpensive walk-behind tractor. Yes, it’s not the cheapest, but if you look at the equipment, the price is completely leveled out. In addition to the unit itself, you also get a set of attachments, including a coulter, several knives, rollers, as well as a whole set of bolts, fasteners and even keys for repair and maintenance. If your dacha does not resemble a car repair shop with a bunch of repair equipment, be sure to look at this product. You don’t have to buy anything extra for it, and repairing a walk-behind tractor is a regular activity. Even if we are talking about the best model of its kind.
Advantages and disadvantages
- Maximum configuration
- Maintainability
- Engine of unknown origin
- Heavy weight
Top 8. Neva MB-2KS-(168FA)
Rating (2021): 4.13
26 reviews from resources were taken into account: Yandex.Market, All Tools, Review
The widest track The width of the plowed track of the walk-behind tractor is 126 centimeters, which is about 30% more than the most popular models. This parameter significantly increases the speed of processing the area.
- Characteristics
Average price: 44,900 rub.
- Country Russia
- Engine power (hp): 6.5
- Plowing width (cm): 126
- Number of speeds (forward/reverse): 4/2
- Gearbox type: gear-chain
- Weight (kg): 85
The higher the efficiency of the walk-behind tractor, the faster the land is processed. The parameter depends on two aspects: engine power and track width. Both are implemented in this product in the best possible way. On board the car is a 6.5-horsepower Zongshen engine, famous for its build quality. And the width of the plowed track is 126 centimeters. This is the best result among similar models. In addition, the walk-behind tractor has four forward and two reverse speeds, which further increases productivity. Unfortunately, this is not an inexpensive model, but if your dacha has a plot of 10 acres or more, then it makes sense to overpay for the speed of work and build quality.
Advantages and disadvantages
- Widest track
- Reliable motor
- Not the most comfortable control handle
Types of walk-behind tractors
Light walk-behind tractors
The segment is represented by devices weighing up to 80 kg. Often these are gasoline models that are well suited for caring for a plot of 15 acres and soft soil. They are convenient to transport to the country in a car.
Advantages:
- sufficient choice of models according to cultivation depth;
- processing width is from 60 to 90 cm;
- presence of reverse gear;
- compact dimensions;
- quiet engine operation;
- low vibration.
Flaws:
- increased fuel consumption;
- the belt clutch wears out faster;
- not suitable for large areas.
Medium walk-behind tractors
Models weighing 80-100 kg are equipped with both gasoline and diesel engines. Designed for sowing grain in fields, plowing large areas (30-100 acres) and transporting crops in a trailer.
Advantages:
- reasonable cost;
- engines in the range of 5-7 hp;
- chain gearboxes are easy to repair;
- a large number of gears;
- spacious fuel tanks;
- combination with a variety of attachments.
Flaws:
- loud work;
- slips on virgin soil.
Heavy walk-behind tractors
Devices from 100 kg, designed for working on hard ground (clay, stones) or developing virgin soil. They are actively used for transporting crops and other cargo in a trailer. Only diesel versions are available. Often used in commercial use (hired work, growing crops in particularly large volumes).
Advantages:
- suitable for developing virgin soil;
- easily transports heavy loads;
- some models have an attached seat;
- volumetric fuel tank;
- travel speed up to 18 km/h;
- powerful diesel engine;
- starts from an electric starter.
Flaws:
- loud work;
- expensive repairs;
- high price.
Top 7. Aurora COUNTRY 1100 MULTI-SHIFT
Rating (2021): 4.22
11 reviews taken into account from resources: Yandex.Market, All Tools
Many gears The walk-behind tractor has four forward gears and two reverse gears, which allows you to process even difficult areas and plow compacted soil after the winter season.
- Characteristics
Average price: 62,400 rub.
- Country: Russia (manufactured in China)
- Engine power (hp): 8
- Plowing width (cm): 110
- Number of speeds (forward/reverse): 4/2
- Gearbox type: gear
- Weight (kg): 105
The manufacturer is trying its best to be like a European or American brand. Everything, from the company name to the appearance of the walk-behind tractor, hints at foreign origin. But no, the homeland of the brand is Russia, and the unit itself is produced in China. It is equipped with a Shineray engine, which is inferior in quality to the more familiar Lifan. The handle is adjustable in two planes, but it will take time to change its position. The main advantage of the machine is the increased number of speeds. The motor rotates forward in four positions, and backward in two. The land is processed as quickly as possible, and if your dacha has a plot of 10 acres or more, it makes sense to buy this device.
Advantages and disadvantages
- Many speeds
- Attractive design
- Poorly thought out ergonomics
- Not the best quality engine
- High price
Top 6. PATRIOT Kaluga M
Rating (2021): 4.24
80 reviews from resources were taken into account: Yandex.Market, All Tools, DNS, Reviewer
The best example of joint production Joint Russian-German production made it possible not only to take into account all the requirements of the local buyer, but also to significantly reduce the price compared to products produced under this brand directly in the brand’s homeland in Germany.
- Characteristics
Average price: RUB 32,600.
- Country: Russia-Germany
- Engine power (hp): 7
- Plowing width (cm): 85
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear
- Weight (kg): 87.4
The German brand Patriot is often called the best in a variety of areas. But it was difficult to call it cheap until recently. After the transfer of production facilities to Russia, the products of this company fell into the inexpensive segment, while the quality remained at a high level. This walk-behind tractor has a honed engine that has been tested directly in production. It has increased efficiency, and after purchase and assembly you can immediately start working, which is very convenient. The 7-horsepower unit copes even with frozen and compacted soil, plowing an area of 90 centimeters. It is possible to install attachments and move the throttle handles to the other side.
Advantages and disadvantages
- Universal fastening of canopies
- High tillage speed
- Run-in engine
- There is a manufacturing defect
Top 5. Hyundai T 1300
Rating (2021): 4.26
17 reviews from resources were taken into account: Yandex.Market, All Tools, DNS
The most reliable walk-behind tractor A popular brand that is distinguished by high build quality and uses only the most reliable parts in its design. Judging by customer reviews, as well as tests of the Drive portal, the unit copes with even the heaviest loads.
- Characteristics
Average price: RUB 36,800.
- Country: South Korea
- Engine power (hp): 7.5
- Plowing width (cm): 90
- Number of speeds (forward/reverse): 3/1
- Gearbox type: gear
- Weight (kg): 93
The Korean brand Hyundai has long gone beyond the production of cars. Today it is no less famous as a supplier of various tools and equipment. Including walk-behind tractors. The unit cannot be called cheap. The price tag is quite high, which is explained and offset by the build quality. In terms of reliability, this is the best option, which does not have to be repaired every time after work. Ergonomics deserve special attention, allowing you to work for many hours without experiencing fatigue. In general, if your dacha has 10 acres of land, and you want to process it as quickly as possible, then this device will be an excellent solution. Even if not the cheapest.
Advantages and disadvantages
- High build quality
- Thoughtful ergonomics
- High power engine
- Long-term operation without breakdowns
- High price
- Expensive service
Motoblock class.
Motoblocks are divided into 3 classes.
Lungs. Motoblocks weighing 60-80 kg, designed for plots of 10-20 acres. The engine is usually 6 or 6.5 hp. Motoblocks of this class are capable of performing all work, transporting loads weighing up to 300 kg, and working with any active attachments. Prominent representatives of the light class: Mobile K MKM-3, MKM-4, NEVA MB-Compact, Motoblock AVANTGARD, Tselina MB-501. All light-duty walk-behind tractors are equipped with cutters, axle extensions, and 4x8 – 4x10 wheels. Additionally, lugs can be installed.
Average. Walk-behind tractors weighing 80-120 kg are intended for plots of 10-50 acres of land. The engines have a power of 6-10 hp. They are capable of working with both active and passive attachments, transporting loads weighing up to 500 kg, sometimes they have a wheel unlocking function, there are options with both a V-belt drive and a power take-off shaft . Bright representatives of the middle class with belt drive: OKA, Tselina, NEVA series MB-2, MB-23, Agat, Weima. Motoblocks with PTO: UGRA, some modifications of Weima.
Remark : let's return a little to cultivators, there are cultivators Fermer, Asilak, Shtenli in the characteristics of which it is written that they have a PTO (power take-off shaft). And indeed, they have a so-called PTO. And this is where cognitive dissonance begins. If Fermer/Asilak have at least a real PTO, then Shtenli comes with a fictitious PTO. In Shtenli, the PTO has constant rotation and does not correspond to the diameter for active attachments, i.e. in fact it is IMPOSSIBLE to use it. But Fermer/Asilak do not import active attachments for their walk-behind tractors. At their core, models from these manufacturers and other Chinese analogues cannot be used as a walk-behind tractor with active attachments, so in fact they remain cultivators with a PTO (which is not functional). This is generally one of the most important nuances, for the sake of which I started this article. In real life, it is impossible to operate a Chinese walk-behind tractor with a PTO.
Heavy. Heavy-duty walk-behind tractors weighing from 170 to 240 kg. They are usually used on plots from 20 acres to a hectare. They are heavy, have a massive appearance, a gear reducer, a differential lock function, and a power take-off shaft. Engine power 9-13 hp Wheels 6.00 x 12 with regular or high tread, or 6.50 x 12. Both passive and active attachments are mounted on these walk-behind tractors. Active attachments are connected via the PTO, including the cutter. Passive, through a special coupling device. This class of walk-behind tractors costs quite a lot of money, attachments are also very expensive, one active cutter costs about 1000 Belarusian rubles. Most often, such walk-behind tractors are used on farms with a decent cultivation area. Although private individuals, they often use such walk-behind tractors on plots of 20-50 acres. On the other hand, a walk-behind tractor of this class, with a set of attachments, will cost close to the price of a mini tractor. Here you need to weigh the pros and cons. Prominent representatives of the heavy class: MTZ (Belarus), Motor Sich, Grasshopper, Mobile K G85, Mobile K Ghepard. They are virtually identical, with slight differences in the gearbox, engines, and gearboxes.
Engines
Engines from world manufacturers are installed on walk-behind tractors of any class. Most often you can find motors on light and medium-class walk-behind tractors:
Lifan - a Chinese-made engine, most often you can find the 168F series - 6.5 hp, 170F - 7 hp. and 177F-9 hp Installed on walk-behind tractors OKA, UGRA, Avangard, AGAT, Tselina. The motors have declared themselves to be highly reliable, of high quality, with a service life of 500 hours, and inexpensive to maintain. The cost of the engine can be from 210 rubles and above, depending on the modification.
Briggs&Stratton is an American company that produces engines for garden equipment; engines are also assembled in China. Most often, Briggs&Stratton engines are found on walk-behind tractors: OKA, UGRA, NEVA, AGAT. Power from 6 to 10 hp. One of the inexpensive engines is the RS 950 version - 6.5 hp. The resource of which is, as in Lifan, from 500 engine hours. The next engine is the VANGUARD series with 6.5 hp, the service life of this engine is from 2000 hours. And the B&S I/C 10.0 hp engine, a high quality, durable engine. The cost for RS can start from 400 rubles, VANGUARD from 600 rubles.
Honda is a Japanese company producing engines with a power of 6.5 - 13 hp. Can be mounted on both light, medium and heavy walk-behind tractors. Honda engines can be found on walk-behind tractors: OKA, UGRA, AGAT, NEVA, Belarus, Mobile K. On middle-class walk-behind tractors, you can most often find the HONDA GX200 engine - 6.5 hp, on heavy GX270 walk-behind tractors - 9 hp. , GX390 – 13 hp All HONDA engines have a huge resource and are among the best professional engines installed on walk-behind tractors.
Yamaha - Japanese premium engines. The power of motors installed on walk-behind tractors is 6 – 12 hp. Can be found on NEVA premium segment walk-behind tractors. Reliable, durable motors have won the hearts of consumers.
Subaru, Hammerman, Kasei, Kohler, Dinking.
My recommendation would be this.
If you are choosing a walk-behind tractor and want to save money when purchasing, choose one with an engine: Lifan, Briggs&Stratton RS, Kasei, Hammerman, Kohler, Dinking. This will give you the opportunity to buy a high-quality walk-behind tractor at a minimal price. The service life of these engines, depending on the quality of maintenance (oil, etc.), will be from 500 engine hours. This is about 5-7 years of work. After this period, you buy yourself a new engine for $100+ and work for the next 5-7 years. I’ll tell you a secret, customers who buy premium engines work on it for 7-10 years, and when replacing they also buy Lifan, since new premium engines are very expensive. For those who are afraid of Chinese engines, albeit groundlessly in the 6.5 hp segment, I recommend the HONDA GX200 or VANGUARD. Who wants more power, take Yamaha, Briggs&Stratton I/C 10 hp, Subaru EX-17 (21). The walk-behind tractor will initially cost much more, but you will get a service life 2-3 times higher than with Lifan motors and the hedgehog with them. But, we must remember that any repair, if, God forbid, a breakdown occurs, will cost the same as the cost of a new Lifan engine. Replacing a carburetor with a HONDA engine will actually cost the cost of a Lifan 168F 6.5 horsepower. Therefore, in such cases, consumers prefer replacing with a new Chinese engine.
Gearbox
Walk-behind tractors usually use several gearboxes of different designs. In fact, this is the most important element of any cultivator or walk-behind tractor. Each type has its own advantages and disadvantages. Let's figure it out.
Worm gear. Most often installed on light cultivators. The design is quite simple, one might say primitive. Consists of a worm mechanism and a gear. It has a very high efficiency, but does not tolerate high loads, so it is contraindicated to work on virgin soil, even as with a plow or hiller. This type of gearbox has a very short service life and is prone to overheating and failure. There are no devices with this type of gearbox in our online store PROmotoblok.by.
Chain reducer. Consists of 2 gears and a chain. This design is very simple, quite reliable, and repairable. Typically used in light cultivators with low engine power. Suitable for small processing areas, attachments are very limited, you can work in small areas with a light plow and hiller. An important point that is worth paying attention to is the rotation speed; it is advisable to select an option that does not exceed 140 rpm, otherwise working with cutters at speeds above 140 will lead to too high grinding of the soil, which will negatively affect the cultivation of various crops. Over time, or under high load, the chain tends to stretch. If not diagnosed and replaced in time, this can cause damage to the stars themselves, which can ultimately lead to complete destruction. The housing of such a gearbox can be either collapsible or not. In the first case, you can replace the chain and gear, in the second - only a complete replacement.
With a chain gearbox, our store presents cultivators: Sadovnik TT, NEVA series MK-70, Mobile K MINI, some models of cultivators Shtenli, Fermer, Asilak, Tselina MB-902.
Gear-chain reducer. Several types of these gearboxes are produced, the most popular being: single-speed, two-speed and more. As you guessed, the design consists of several gears and chains. This design allows you to achieve ideal output shaft speeds (80-120 revolutions), you can use any attachments and work on virgin soil. A very high service life and reliability will allow you to work with such a gearbox for many years, comfortable switching and low noise and vibration levels will bring comfort to the operator. This is the most common type of gearbox, which is installed on most modern walk-behind tractors: NEVA, AVANTGARDE, TSELINA, Mobile K
Gear-chain reducer MultiAgro. Personal development, aggregated only with NEVA walk-behind tractors. As a rule, classic gearboxes are available in 2(4) forward gears and 1(2) reverse gears. In terms of speed characteristics: 1st gear - 3 km/h, 2nd gear - 4 km/h, 3rd gear - 6 km/h, fourth - 9 km/h.
The plant's engineers decided to expand this range of speed characteristics and built a multi-stage MultiAgro gearbox, achieving the most optimal speed when working with various attachments. Thus, NEVA walk-behind tractors with a MultiAgro gearbox have from 6 to 8 forward gears and 2-4 reverse gears, thus offering the consumer a speed limit in the range from 2 to 12 km/h. The cost of walk-behind tractors with this gearbox is quite high; I can recommend this option only for consumers with a large cultivation area where there are different types of soil, this way you can adjust the most suitable gear for working with a specific mounted implement on a specific soil.
Gear reducer. Consists of a set of gears and has no chains. This design is the most reliable and unpretentious both in operation and maintenance. This type of gearbox is capable of working on the most difficult soils, in the most extreme conditions. Most often it is installed on walk-behind tractors with a PTO. These walk-behind tractors are capable of working with heavy attachments and allow processing virgin soil. The use of high quality metal and the exceptional fit of each gear provides a significant advantage over other types of gearboxes. The gear reducer is installed on AGAT walk-behind tractors, also known as Salyut 5, these walk-behind tractors are extremely popular and highly reliable. The best walk-behind tractor with a PTO with a gear reducer is UGRA. Heavy walk-behind tractors with a PTO and the same gearbox are represented by the following brands: Belarus, Motor Sich, Grasshopper, Mobile K G85 and Ghepard. You can also find Chinese cultivators with this type of gearbox: Shtenli, Stark, Fermer, Asilak (although installing a rather expensive gearbox in a cultivator does not make any sense, since the latter do not have a PTO and are unable to work with active attachments)
Top 4. Steher GT-300
Rating (2021): 4.35
22 reviews taken into account from resources: Yandex.Market, All Tools
Best price The cheapest unit in our rating, costing about 15% less than its closest competitors. The quality of parts and assembly is at a high level.
- Characteristics
Average price: 26,000 rub.
- Country: Germany (produced in Russia)
- Engine power (hp): 7
- Plowing width (cm): 85
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear-chain
- Weight (kg): 78
If you need an inexpensive walk-behind tractor capable of cultivating a plot of 10 acres, then this is in front of you. This is the cheapest unit in our rating, and produced by a fairly well-known brand. This pricing became possible due to the transfer of production to Russia. The quality of the instrument has been maintained, but the price has decreased. Of course, you should understand that productivity here is not the highest. The width of the furrow varies from 60 to 80 centimeters, which is not much. The 7-horsepower engine can handle even the most frozen ground. In general, this is the best cheap walk-behind tractor, the quality of which has virtually no complaints from buyers. And the ability to install additional equipment makes it extremely versatile.
Advantages and disadvantages
- The cheapest walk-behind tractor
- Adjustable furrow width
- Quick attachment of attachments
- Limited plowing width
- Difficult to find engine parts
Rating of the best cultivators for the garden
10. Neva MK-200-S6.0
A modern and lightweight model of a cultivator with an installed Japanese Robin Subaru engine with a power of 6 hp. is very popular among farmers, summer residents, and gardeners. Despite its small weight of 65 kg, it behaves quite steadily on loose soil.
Can perform various agrotechnical and economic work on small and medium-sized areas. Users note the ease of replacing cutters and excellent controllability. The width of the soil treatment is 6-96 cm.
Review from Yuri, 40 years old. Very stable and maneuverable unit thanks to the support wheel. There are no problems during cultivation and transportation. Carefully assembled, you can't find fault with it. I'm pleased with my purchase.
9. DDE V800 II Krot-3 7 hp
A middle-class cultivator with reverse is suitable for cultivating areas up to 25 acres. Using two pairs of cutters made of hardened steel, the unit can plow a bed 0.65 m wide in one pass. The maximum plowing depth is 25 cm.
4-stroke internal combustion engine 7 liters. With. released under license from HONDA. This type of equipment can be used not only on cultivated land, but also on virgin land. Thanks to the rear wheels, it is convenient to transport and overcome rapids.
Review from Alexey, 33 years old When I work, stones and soil do not fly at me, wide wings protect me. Very comfortable handles, even if you work for a long time your hands practically do not get tired.
Husqvarna TF 230
Cultivator with an engine capacity of 196 cubic meters. see is not afraid of roots, stones and virgin soil. Equipped with ergonomic handles that relieve stress on your hands when performing large amounts of work. The set includes 6 cutters made of durable steel with a diameter of 32 cm.
A three-speed motor cultivator allows you to loosen and plow up acres of land that have not been cultivated for a long time in an old neglected dacha in just a few hours. It is no more difficult to control than a bicycle. Significant weight allows you not to put pressure on the machine for better immersion.
Review from Andrey, 31 years old. In difficult places, I first turn on the first, and therefore second, speed. The rear one is also in demand. What we used to dig together with my brother for three days, now we can do it in 5-6 hours, and even then with “smoke breaks”, without straining too much.
Daewoo Power Products DAT 7090R
One of the most reliable and popular cultivators among summer residents, it saves money thanks to its large working width of 90 cm and the speed of two saber cutters up to 170 rpm. Equipped with a powerful 7 hp engine. With. and an optimal fuel tank capacity of 3.6 liters.
The height-adjustable handle can be folded for transport. Such a unit can be purchased for a large dacha with difficult soil.
Review from Nikolay, 39 years old I have a new building, 18 acres of land. While it was being built, I trampled everything around so much with equipment that I thought about laying asphalt. I bought it on the advice of a neighbor, he had the same situation. The cultivator is pure fire, cuts like clockwork, a huge saving of time and effort.
TARPAN TMZ-MK-03
The unit is equipped with a reliable rotary cultivator, which can evenly mix the soil with mineral fertilizers. Standard capabilities allow you to capture beds up to 70 cm in width.
It is possible to install additional cutters that increase this parameter to 1000 mm. 4-stroke engine with a volume of 163 cc. cm power 5.50 hp allows you to develop the rotation of cutters up to 120 rpm.
Review from Ruslan, 41 years old It is easy to assemble and disassemble, when disassembled I place it in the trunk of a sedan. I work all day, with short breaks. It doesn’t overheat, the cultivator is easy to operate, and it has earned its money’s worth a long time ago.
CHAMPION BC5712
The purpose of this cultivator is plowing and simultaneous placement of fertilizers, loosening and leveling the area. Using this technique, it is easy to weed between rows, hill up potatoes and cut furrows for root crops and vegetable seedlings.
ICE with a volume of 196 cubic meters. cm has a good torque, which allows the cutters to operate at the same speed when the load changes. Reverse gear is engaged by simply pressing the lever. When using additional equipment, the range of capabilities of the unit increases.
Review from Mikhail, 36 years old The experience of use is positive. During a working day, I easily cultivated virgin soil with an area of 7 acres. This technique will not cope with farm hectares, but for a large home garden this is what is needed.
Hyundai T 850
The motor cultivator copes excellently with its main task - mechanical soil cultivation. The manufacturer offers a good set of cutters: 2 round knives and 4 saber-shaped knives. The design of the equipment allows you to install them all at once or selectively. Engine 6.5 hp will cope with the processing of virgin soil.
The motorized cultivator develops an average walking speed and breaks up large clods well. With its help, you can prepare beds for planting without manual labor. The control panel is adjusted to the operator's height.
Review from Alexander, 50 years old Starts up from the first pull and has never failed during the season. The cutters are easy to change. On hard areas I left 2 cutters and the car moved easily. I recommend it for vegetable gardens and summer cottages with an area of up to 15 acres.
ELITECH KB 60N
Unit with a powerful 7 hp motor. allows you to continuously loosen the soil with cutters, plow up virgin soil, hill up or dig up potatoes. 6 cutters with a diameter of 33 cm are included in the kit; attachments are purchased separately. The bed grip is 35 -85 cm. Rubber sliding handles provide ease of control.
Review from Vladimir, 41 years old I work mainly at medium speeds. It starts well, the engine runs quietly, without any strain. In about an hour and a half of operation, 2 liters of gasoline are consumed. This is very little, considering our clay soil. The result of the work is pleasing.
2. Huter GMC-6.5
The motor cultivator successfully copes with cultivating land, including virgin lands. Using a set of six cutters with a diameter of 32 cm of a special design, you can produce high-quality loosening of the soil while simultaneously destroying weeds.
Equipped with a 6.5 liter engine. Fuel tank 3.6 liters. does not require frequent refueling. The vertically adjustable handle contains controls.
Review from Irina, 36 years old. I bought it for my husband as an anniversary gift. Now we go to the dacha as a holiday. We work half the day, or rather, my husband controls how the equipment does it for him, the second half we grill kebabs. Previously, you had to devote at least 3-4 weekends to weeding and preparing the beds. The shovel and rake sit unused in the shed.
Mobile K MKM-1R
The leader in our review of cultivators is a unit with a gear-chain two-stage reinforced gearbox. Thanks to this solution, the model developers managed to achieve an optimal rotation speed of the cutters of 80-120 rpm. Easily adjustable working grip: 37, 67, 97 cm.
We recommend another fresh rating of the best walk-behind tractors of this year, the top 10 models.
The design of the unit includes a hitch for the hiller. This technique is convenient for hilling/digging potatoes, loosening the soil, removing weeds and developing virgin soil. Thanks to the excellent ergonomics of the handle, the load on the operator is relieved.
Review from Sergei, 37 years old. Purchasing a cultivator took away the headache with the dacha. We don’t make beds there, we just relax, now no longer surrounded by weeds. We are thinking about installing a large greenhouse next year. When labor is motorized, any task can be done.
Top 3. BISON MTB-300
Rating (2021): 4.51
54 reviews from resources were taken into account: Yandex.Market, All Tools, DNS, 220 Volt
Compact layout of modules The design of the walk-behind tractor is made in the most compact form factor, which is very convenient when storing the unit. If necessary, the gearbox can be rotated at different angles to attach additional modules.
- Characteristics
Average price: RUB 33,300.
- Country Russia
- Engine power (hp): 7
- Plowing width (cm): 85
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear-chain
- Weight (kg): 78
If your dacha does not have a huge hangar for storing tools and you have to constantly think about the size of the units, be sure to pay attention to this model. Its main advantage is its size. Even when assembled, the machine has fairly compact dimensions, and it can be folded without disassembling or detaching modules. Unfortunately, you have to sacrifice performance. The width of the plowed land is only 60 centimeters. At the same time, the engine has a power of 7 horsepower, which is quite a lot, and allows you to process a plot of more than 10 acres.
Advantages and disadvantages
- Compact dimensions
- Folding design
- Convenient installation of attachments
- Quite a narrow plowable furrow
- Inexpensive unit
See also:
- 10 best diesel walk-behind tractors
Top 2. Huter MK-7000
Rating (2021): 4.55
124 reviews from resources were taken into account: Yandex.Market, All Tools, DNS, 220 Volt
The most popular model is the Motoblock, which has collected the largest number of reviews on such popular trading platforms as Yandex.Market and All Tools. The model also became the subject of a number of tests on the Drive portal and showed good results.
- Characteristics
Average price: 27,800 rub.
- Country: Germany (manufactured in China)
- Engine power (hp): 7
- Plowing width (cm): 100
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear-chain
- Weight (kg): 72
The German brand Huter has long been considered the best manufacturer of garden equipment. It is praised for its reliability and durability. This walk-behind tractor uses the company’s own engine. Its power is 7 horsepower, which allows you to process an area of 10 acres or more. The land is plowed to a meter width, which is also an advantage and increases the productivity of the unit. There is a wheel at the front that limits the level of tilt. Its location is easily changed, as is the level of the rear stopper. And the articulated handle makes the walk-behind tractor easy to use for people of any height. The chain drive will be a separate advantage. Especially if the ground is hard.
Advantages and disadvantages
- Chain transmission
- Articulated handle
- High quality motor
- Wide furrow
- Difficult to repair with your own hands
See also:
- 10 best Russian-made walk-behind tractors
How to choose the right walk-behind tractor for the village
When choosing a walk-behind tractor for a village, you must be guided by the same criteria that are used to select country equipment. These include:
- Land area
- Soil quality
- Tasks (ploughing, hilling, planting, transporting goods, mowing grass, etc.)
- Price
Medium and heavy class walk-behind tractors are suitable for the village. The middle class of walk-behind tractors is suitable for 30 acres with good soft soil; it can also be used to cultivate heavier soils of the same area, but productivity may be reduced.
A cultivator is also suitable for a village, but cultivating large areas of land will take more time than cultivating with a walk-behind tractor. A cultivator is a good helper for pensioners, as it weighs much less and is easier to control. Even light walk-behind tractors can be difficult for retirees to operate.
As a rule, in the village it is necessary to perform more diverse tasks, so a walk-behind tractor with attachments will be more useful than a cultivator. Using mounted rotary mowers, you can make hay for livestock; potato planters and diggers will facilitate the work of planting and harvesting. Motorized plows can be used to plow virgin lands, as well as to create trenches for construction (foundations, fences, etc.).
The price of a walk-behind tractor largely depends on the type of engine. Electric ones are cheaper, diesel ones are the most reliable, but also expensive. The best option is walk-behind tractors with a gasoline engine and an electric starter with a generator, which ensures battery operation even in the absence of electricity. The advantage of this type of starter is ease of inclusion. Many models of Russian-made walk-behind tractors are equipped with imported engines with a power of up to 12 hp, but 5-8 hp engines are suitable for most work.
Top 1. AGATE L-6.5
Rating (2021): 4.58
30 reviews from resources were taken into account: Yandex.Market, All Tools, Reviewer
Best value for money Compact walk-behind tractor equipped with a powerful 6.5 horsepower engine and a gear reducer. Acceptable layout at an affordable cost.
- Characteristics
Average price: 31,200 rub.
- Country Russia
- Engine power (hp): 6.5
- Plowing width (cm): 60
- Number of speeds (forward/reverse): 2/1
- Gearbox type: gear
- Weight (kg): 84.7
The walk-behind tractor cannot be called the most powerful or productive. However, it was this product that buyers gave the highest rating, awarding it the title of best value for money. Indeed, it is difficult to find flaws in the device. The Lifan 168F-2 engine has long established itself as reliable and durable, and the ability to install attachments, including snow removal equipment, further expands the machine’s capabilities. Visually, one of the drawbacks is the handle, which is attached to the body in one plane. Under serious load this can become a problem, but there is not a word about this in the reviews, that is, the manufacturer somehow thought through this point, and the fastening is quite strong.