What to do if the door of the washing machine does not open after washing

When door locking does not require intervention

An automatic washing machine is a complex mechanism that involves the work of several forces at once. It contains two dangerous factors: electricity and water. Manufacturers took into account the consequences and developed a special security system.

For safety reasons only, it is impossible to open the washing machine door during the washing process. The door lock is activated immediately after installing the program and starting it. From this moment on, on many models the sign in the form of a lock lights up. The automatic locking system prevents water spills in the room, eliminating the risk of electric shock and burns. The water in the device heats up to 90 degrees and opening the door during the washing process can lead to serious damage.

Another norm is considered to be if the washing machine does not open after washing immediately after the end of the cycle. The technique takes a few minutes to remove all excess water. This period differs in different models. The average time to completely turn off the machine is 1-2 minutes.

Important! If the washing machine model includes a drying option, the doors will unlock only after the drum has cooled to a safe temperature.

Such situations cannot be considered a malfunction. This is just a feature of the washing machine and you don’t have to take any additional actions.

Reasons for blocking the hatch

Even under conditions of proper operation, there may be several such reasons:

1. Water in the tank. After the wash cycle has completed, water may remain in the drum and prevent the automation from unlocking the door. This occurs due to a breakdown of the control board, level sensor or pump. Only a specialist can solve the problem. The drain filter may also become clogged. You can clean it through the hatch at the bottom of the device. Finally, the stop function may have been accidentally triggered with water in the tank. After turning it off, the water will drain automatically.
2. The program did not fully work. The last stage of washing in modern SMAs is an automatic washing machine.

“>SMA is the cooling of laundry to a safe temperature. When it cools down, the door will unlock itself.

There are mechanical and electronic devices.

">UBL. Pretty easy to change yourself. To facilitate access, you will need to remove the sealing collar located behind the hatch, unscrew the fastening screws and reset the contacts.

• Damage to the handle. This happens quite often because it is always made of plastic for safety. The design features and options for troubleshooting will become clear if you remove the door and disassemble it. When performing these operations, it is advisable to photograph each stage. In the future, this will help to correctly assemble the entire structure back.
• Child protection. Automatic washing machines always have the ability to lock the hatch to prevent unauthorized opening by a child. This function could have been turned on accidentally or by someone in the household. If you turn it off by pressing two specific keys, the hatch will open as usual. The combination is indicated in the instructions and is also graphically depicted under the keys.

All of the above refers to standard reasons and methods for opening the door. For a non-standard situation, you can use improvised devices.

Causes of equipment failure

The most common reason why the washing machine door does not open after the wash is completed is that the handle itself is broken. This is a mechanical problem. To eliminate it, you will have to use additional means, but you won’t have to call a technician to open the hatch.

The cause of mechanism failure may be: wear of its parts, rough handling, or a low-quality part that was originally supplied to the device.

Inspecting the equipment locking device will help determine that this is where the breakdown occurs. The handle for opening the door will move freely in both directions, but the characteristic opening will not occur.

What to do in this case:

1. Turn off the power source. Just unplug the cord from the outlet.
2. Open the hatch at the bottom of the equipment. There you will find a hatch for emergency water release. In some models, this part also contains a cable with which you can unlock the door. Most often the cable is a small section of orange rope.
3. Pull the cable.

A more complex option in the absence of a cable for emergency opening of the hatch:

1. Disconnect the machine from the network.
2. Unscrew the top panel and move it to the side.
3. Tilt the car back.
4. The drum will move slightly in the same direction.
5. Feel for the latch with your hand and pull it.

This method is best done together by two people to make the task easier.

The next problem why the door cannot be opened may be a malfunction of the door locking device. This element also wears out and fails. The procedure in the previous paragraph will help correct the situation. You will have to force the door to open.

Important! A broken element must be replaced before the next use of household appliances.

If the handle and module work properly, then the reason for the hatch blocking may be a breakdown of the electronic module. This is a system that, when a certain cipher is submitted, triggers an unlocking mechanism. So, the machine can complete the washing process, but a signal about this does not enter the board. You can solve the problem with the help of a specialist. To do this you will need to do one of the following:

1. Reflash the control board.
2. Buy and install a new control unit. This procedure is more expensive, but effective.

The cost of repairs if it is necessary to replace elements of a washing machine depends on the cost of the parts and the model of equipment itself.

Why does the machine do this?

A Bosch washing machine may not open for many reasons. It is interesting that the “culprits” for the blockage that occurred are not only the locking mechanism, but also other system malfunctions. So, at least five problems lead to an unyielding door.

• Untriggered UBL. The hatch locking device rarely fails; more often, users are simply in a hurry. It is worth understanding that the electronic lock automatically opens 1-3 minutes after the cycle is completed. You need to wait and try again.
• System failure. It is possible that a technical “glitch” occurred due to power surges, power outages, or problems with water pressure. The control board got lost in the program and did not give the command to remove the UBL.
• Damage to the locking mechanism. If handled carelessly, the lock may break. As a rule, only replacing the device helps.
• There is a blockage in the drain hose. If there is a failure in the drain system, the drum does not empty, so the control board does not command the door to unlock.

• Working dashboard lock. When the so-called child lock is activated, the door cannot be opened.

The door on Bosch washing machines does not open due to a faulty UBL, problems with drainage, a technical failure, a broken door lock and the activated “Child Lock” function.

The user can solve most of these problems on his own. You just need to look at the factory instructions, use logical thinking and take your time. The recommendations described below will help you cope with emergency opening of the hatch.

What to do if the power goes out

Even today, the problem of power outages remains relevant. In this case, the washing cycle does not have time to complete and the process abruptly stops. After this action, the washing machine will stand for a long time with the hatch blocked. The main reason for this will be the availability of water.

The technology automatically locks the doors if the water in the drum reaches a certain level. If the power outage is short, you can do nothing.

In this case, washing will resume immediately after power is turned on. The door will open when the mode reaches its end. This course of events is acceptable when the lights are turned off for 0.5-2 hours. Leaving clothes with water in the drum of a washing machine for a longer period of time can lead to disastrous consequences. In the form of fabric damage and mold.

To solve the problem, you need to get rid of the water in the drum. For this:

1. Open the hatch at the bottom of the machine.
2. Find there a valve and an emergency water release hose.
3. Prepare the container. It's better to take the basin. The bucket will be awkward to place.
4. Place a container under the hose. Open it.
5. Wait until the water drains completely.
6. This process can take a long time because the emergency water release hose is small in diameter.

After this, the system will unlock the door and you can open it.

Important! You can also take out the water drain hose and run it below the level of the tank. The water will drain by gravity and release the device.

If the unlocking process does not work, then you can try opening the hatch yourself. For this:

1. Thread strong twine under the door. This must be done around the entire circumference of the door.
2. Pull both ends of the rope towards you. Additionally, you can carefully use a screwdriver and help it open the hatch.

Such a procedure may result in injury to equipment elements. And it is recommended to use it only in the most extreme cases. In addition, the method is not suitable for all manufacturers. depends on the type of locking device.

Emergency door opening

This need usually arises when the washing program has already started and it is realized that money, a telephone or something similar has got into the tank. To open the hatch in an emergency, you must unplug the power cord.

Next, use an emergency hose to drain the water. Then the machine is plugged back in, after which the door can be opened in the usual way and the laundry taken out.

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

What to do if the water is turned off during washing

If the washing program has already started, but the water is turned off during this, the equipment will give a special signal. On devices with an electronic display, the corresponding symbol will light up.

How to open the door:

1. Start one of the Spin, Drain, Spin+Drain modes.
2. The system will remove any remaining water from the machine and the door will automatically unlock.

Such actions will not cause any harm to the equipment and are absolutely safe. You can continue washing after the water supply is restored. To do this, reinstall the mode and run the program.

Do not unplug the cord from the outlet while washing. This will help stop the program and after a while the machine will unlock the door, but such actions are dangerous for the mechanism itself.

When working with a washing machine, you should always follow safety precautions. Never begin any repair operations until the power to the device is turned off. You should also always calculate your physical strength. The slightest overvoltage will lead to a breakdown, and then it will be impossible to figure it out without a technician.

How to avoid the problem

Often the cause of a broken door lock is careless handling of the washing machine. You need to choose the right operating modes, correctly calculate the weight of the laundry and use high-quality powder. Before turning it on for the first time, be sure to read the instructions and start the washing machine only according to it.

The washing machine door locking after finishing washing is a common problem. The reasons for it are varied, from a jammed latch to burnt electronics. Self-repair and diagnostics are only permissible in case of mechanical problems. In this case, you can try different methods by first studying the instructions for a specific model.

It is advisable to present a washing machine that has stopped with the door locked to a service center specialist. However, his arrival is not always possible immediately after the call. Therefore, it will not be superfluous to understand how you can independently open the washing machine door if it is locked and remove the laundry from the drum.

The car stopped with water

If, after three or more minutes have passed since the end of the wash, the lock is not going to open, try turning on one of the standard “Spin” or “Rinse” modes again. If at the end of the program no changes are observed, it is better to check the drain hose; it may be clogged and water cannot leave the drum. After cleaning the drain hose, run the “Spin” program again.

If this does not help, you can open the washing machine using the emergency door release cable, which is equipped with any Hotpoint Ariston machine. In most models it is located at the bottom, in close proximity to the filter. The cable has a distinct red or orange color. Pull it slowly, this should release the hatch lock.

It is rare, but it happens that the cable cannot be detected. Don't be upset, there is a way out of this situation too. Unplug the machine and remove the top cover of the washer. Then carefully tilt the household appliance so that the drum moves away from the hatch door. Using these actions, you will have access to the lock. Find the tab responsible for closing and move it away. This method will require a lot of effort, so it is better to call another person to help.

And the methods for opening a drum filled with water don’t end there. In the manual for using Ariston machines, any additional emergency measures may be prescribed for each specific model. Study the manual.

Protection from child interference

Sometimes it happens that the user unknowingly activates this mode. The child lock feature is activated by pressing two buttons. Different models of washing machines have different options for combinations of buttons that activate this option; you need to look it up in the instructions for the washing machine.

You also need to disable the child protection mode by pressing the two buttons selected for this.

The described methods will only work when there is no liquid left in the drum of the machine. But what to do when the washing machine is filled with water? It is possible to remove the hatch lock in this situation, but the solution to the problem will be a little more complicated.

The wash has finished but the door is closed

Automatic closing of the hatch during the washing process is a standard safety measure programmed into the automatic machine. The washing machine should not open immediately, you need to wait a couple of minutes. This function is provided to protect the user when using the machine.

A sudden blockage can also happen due to a program failure due to power surges or a momentary power outage. In this case, you need to turn off the washing machine and leave it alone for half an hour. During this time, the settings will be reset and the hatch will open automatically.

Using the opening method described above is only possible if the tank of the machine is not filled with water. If there is a lot of water inside, you need to use another method.

Brand recommendations

Design features and different software in models of different brands make adjustments to the process of opening the hatch manually.

SAMSUNG. The waiting time after completion of the cycle in models from this manufacturer is approximately five minutes. If after their expiration the hatch does not unlock automatically, then you should turn off the power to the device for half an hour. When you turn it back on, the washing program will be reset and it will be possible to start the mode of draining the washing solution and spinning. After completing this cycle, the hatch will unlock.

HOTPOINT-ARISTON. A special feature of this brand is washing using the “Silk” program. At the end of the cycle in this mode, the water is not drained and the user is asked to determine further actions. It is this moment that can cause confusion. To drain the water, you can turn on the “Easy ironing” option or the spin program.

Automatic washing machines have long been firmly established in the life of every family. Housewives are so accustomed to their faithful assistant in washing clothes that any, even the most insignificant malfunction of the washing machine is comparable to a major tragedy. Quite often there are situations when the hatch door is blocked, and in this case the user asks the questions: “how to open the Ariston washing machine? Do I need to call a specialist or can I deal with the problem myself?”

Features for different brands

The problem with the door blocking on washing machines of different brands can be solved in their own way. Let's look at the features of troubleshooting devices from three manufacturers.

Indesit

On Indesit brand washing machines, the hatch is often blocked due to the fact that a certain amount of water remains in the tank after the wash is completed. The user must manually start the “Drain” mode and wait. All remaining water should go away.

If automatic draining fails, you should resort to the proven method of pumping out the remaining liquid through a hose. As soon as there is no water left in the tank, the door should open on its own.

Many models of this brand are equipped with a special cable for urgently opening the hatch. In this case, the user needs to pull this cable, the door will immediately open regardless of whether there is water inside the tank.

Hotpoint Ariston

Hotpoint Ariston devices are reliable and durable, but they are extremely sensitive to unexpected power outages and power surges. In this case, the hatch is blocked, which does not allow you to remove the laundry after washing and use the washing machine in the future. To solve the problem, you will need to use an emergency rope specially designed for such cases. In this case, it is advisable to first remove the water from the drum using a hose.

It is worth noting that the washing machines of this company have a set of gentle washing modes. When using them, the speed of the drum slows down, which in turn can lead to incomplete drainage of water at the end of the process. Here the user can try pressing the “Start/Pause” key and hold it for a while. After this, you should restart the mode you are using.

Bosch

You can unlock the hatch on a Bosch washing machine by pressing the “Minus” button located on the main control panel. If a key appears on the display, you will not be able to use mode switching. Then you can try holding the “Start” key for a few seconds. The result of such an action should be the drainage of water followed by the opening of the hatch.

Blocking the hatch on a washing machine seems to be quite a serious problem, which will not allow you to remove things and continue to use the capabilities of the device. However, the right approach will solve the problem even without turning to specialists.

The handle is broken

When you, using an automatic washing machine, have established the fact that it is locked , you do not need to pull the handle with all your might and try to open the door by force. This will most likely lead to damage to the handle and cause mechanical failure of the locking lock. If you did not calculate the strength and the door handle fails, you can open the hatch using a cord or rope. The algorithm of actions will be as follows:

If you've been using your washer and suddenly find it's blocked, don't panic. In most cases, you can deal with this problem yourself, without contacting a warranty repair service. However, if you have tried all possible methods and have not found a solution to the problem, it is better to contact a washing machine repair specialist.