TOP 14 Best Welding Inverters

There is an opinion that can be considered an axiom for home craftsmen: “Strive to choose the best possible offer.” And if previously the only possible option was a transformer welding machine, which practically did not work at low network voltage, now you have the opportunity to have an unprecedented choice among inverters. They are superior to outdated models in many respects. This includes mobility, light weight, and the ability to carry out welding in field conditions when the network voltage is of very low quality. In this article we present the 16 best welding inverters for home and garden in the price category from 7,000 to 75,000 rubles. All prices are taken from Yandex Market.

Main characteristics of welding inverters:

Power (rated welding current). This characteristic is indicated in the passport for the device. The rated welding current is the value A at which the inverter (taking into account the recommended load duration, PN%) will operate without shutting down due to overheating. Considering the conditions of the required operation, for example, a rated current of 120A is required, you should choose a device with a rated current of 180A, i.e. Allow a current reserve of about 50%. This will allow you to carry out welding work when the input network voltage is critically reduced and when using cables with a length of over 5 meters.
Load duration (LO). Characterizes the operation of the welding inverter in intermittent mode.
Supply voltage range. If the mains voltage has significant deviations from the nominal value, and this often happens outside the city and in holiday villages, then it is considered unstable and you should purchase devices that can operate with voltage surges of 20-30%.
Additional characteristics that ensure ease of use of the equipment: ARC FORCE (arc force) - arc stabilization;
HOT START (hot start) - provides simple arc ignition by increasing current loads during start;
ANTI STICK (anti-stick) - turns off the device in the event of a short circuit, avoiding sticking of the electrode.

Which company's welding inverter is better to buy?

Most of the devices considered in this TOP belong to Russian companies. Basically, they are sold at low and medium prices, but there are also more expensive options for industrial use.

Here's a more detailed description of each company:

Zubr is a large Russian manufacturer of hand and power tools, materials and equipment for repair and construction. The company began its work in 2005. Among the main characteristics of its devices are the ability to operate at low voltage, protection against overheating and short circuits, ease of arc ignition and stability of its support.
Resanta – one of the company’s activities is the production of welding equipment. The inverter-type models of this company have an average power of 5 kW and neat dimensions, weigh a little (about 5 kg) and are sold with a 24-month warranty. Depending on the specific option, the duration of continuous load is 70%.
Caliber is a Russian brand under which gardening equipment, equipment and power tools are produced. Basically, they are designed for use in everyday life, for example, in the country. The company's welding inverters are equipped with a convenient belt for more comfortable operation and transportation of products. They can be connected to almost any household electrical network, since electrodes with a diameter of 1.5 to 5 mm are used and because of the average power of 5 kW.
Aurora is a Russian brand whose products are manufactured in China. Its product range includes inverters and semi-automatic machines mainly for industrial use. This made it possible for them to operate in a network with a voltage of 380V, although there are also models that use 220V. They perform their tasks in relation to any metal parts: aluminum, cast iron, copper, etc. Some of them require direct current, others require alternating current in an argon environment.
Fubag is a welding equipment manufacturer headquartered in Switzerland. The company's workshops are located on three continents of the world, and its products are manufactured in 19 factories. Its devices are most often used at industrial facilities due to their high power - about 15 kW, but the company's catalogs also include simpler, household devices.
Krüger is a brand registered in Germany with production facilities in China. Thanks to this, devices and equipment of European quality are sold at affordable prices.
Elitech is another Russian brand of electrical equipment whose welding inverters are recognized as the best for argon-arc welding with a non-consumable electrode in an inert gas environment under alternating or direct current. Brand devices have useful “hot start”, Anti-Stick and “anti-stick” options. They are characterized by stable operation even when the voltage drops to 160 V.
FoxWeld - the company supplies the market with electrical equipment, including welding. The company's product range includes budget models, designed mainly to operate in single-phase networks with a voltage of 220V. They are designed for manual arc welding with a consumable coated electrode. Their average weight is 2.9 kg, which makes the products easy to transport. They have the following features - an intuitive control panel, continuously adjustable current, built-in thermal protection.
Wester is a brand of pneumatic, compressor and power equipment owned by. Their key features are: excellent power of the devices - about 8 kW, support for a stable arc, a high degree of protection against electric shock and dust. Brand devices perform their functions at an operating voltage in the network in the range of 140-250V.
Svarog is a Russian brand of welding equipment that has been working in this niche for more than 11 years. They are one of the few companies that offer an unconditional warranty on their products for up to 5 years. The brand has inverters for TIG, MMA, MIG, SAW welding. Reviews note the high quality of seams, durable housings, rubberized regulators, and stable operation under reduced voltage conditions.
Kedr is a brand under which equipment is produced that is adapted for work in Russian latitudes. Its key advantages are the ability to operate under large voltage drops, high temperatures, and excessive humidity. They are also characterized by compact size, light weight, equipped with various indicators, reliable dust protection and minimal noise level during operation.
Brima - the company offers everything for household and professional welding. Many of the company’s devices operate in several modes - MMA, TIG, AC/DC. They are chosen because of the wide range of adjustable voltage in the network, approximately 140-220V, the functions “hot start”, “arc force”, “anti-stick electrode”. The efficiency of these inverters is at least 85%, and the continuous load period is about 65%, depending on the specific model.
Forsazh - the manufacturer offers to buy good welding inverters for amateur and professional welders. The devices are protected from overheating and overload, have smooth ignition of the arc, and maintain it stably, including when the network voltage drops. If it completely disappears, then the devices operate from diesel or gasoline electric generators with a power of over 6 kW.

Best Impact Drills

Rating of the best welding inverters

When choosing reliable equipment, we took into account its efficiency, versatility, functionality, ease of use, safety and other similar parameters.

Here are the characteristics that were taken into account during the selection of nominees for the TOP:

Type – household, professional, industrial;
Power and efficiency level;
Protection against overheating, dust, splashes;
Dimensions, weight and materials of manufacture;
Type of welding – manual argon and/or semi-automatic;
Suitable types of materials;
Diameter of electrodes compatible with equipment;
Recommended areas of application;
Control method - mechanical or using a remote control;
Stability of the arc and ease of ignition;
Possibility of adjusting idle speed and voltage;
Availability of “hot start”, “arc force”, “anti-stick” functions;
Complete set, including length and quality of cables.

We also paid attention to the service life of the devices promised by the manufacturers and their actual behavior in difficult operating conditions; we also took into account the possibility of repair in the event of a breakdown and its complexity. An important indicator here was the ratio of price and quality of goods and the duration of the warranty.

The best reciprocating saws

What to look for when choosing a welding machine

The welding machine must be compact and sufficiently mobile. The lighter its weight, the easier the control process will be, the longer you can use the device at a time. But you need to pay attention to other features of the device, which are specified in the technical specifications:

The on-time is expressed as a percentage; the longer it is, the easier it is to use the device;
The power consumption of the welding machine should fluctuate between 16 A and 25 A, but deviations are possible;
By type, welding machines can be transformers, rectifiers and modern ones, that is, inverters;
The package should include wires, and ideally a welding helmet, a hammer, and a special belt;
Additional options and elements are desirable that allow you to control the device settings, for example, the screen;
It is important that the device is protected from the effects of precipitation and is classified as IP21 or IP23.

The best household welding inverters

On average, the power of such devices is 6 kW, so they are not designed for long-term and active welding. Typically, these devices are powered from single-phase networks with a voltage of 220V and their cost ranges from approximately 6,000-10,000 rubles. Of the 10 products analyzed, the best equipment was selected in terms of quality, efficiency, and operational safety.

Bison “Master” M1

Bison “Master” M1 is designed for manual MMA (fusible electrodes) electric arc welding. It quickly adapts to any operating conditions due to smooth adjustment of the welding current over a wide range using microprocessor control. The ignition system at launch has been improved here thanks to the hot start option, which speeds up the process.

In the ranking of the best welding inverters, the Zubr “Master” M1 stands out with a power of 6.6 kVA, which is very good for use in domestic conditions. Small dimensions and an acceptable weight of 4.5 kg without packaging ensure the device is mobile and can be used in hard-to-reach places. Reliable dust protection guarantees a longer service life. The equipment has good performance, supported, in particular, by high-quality forced cooling.

Advantages

Low power consumption;
High class of protection against electric shock;
Surge protection;
Cooks gently;
Does not overheat even with prolonged use without interruption;
The electrode does not stick;
Good KDP.

Flaws

Not a low price.

Reviews note that welding with direct current gives slightly better quality of the seam, in contrast to the use of alternating current.

Resanta SAI-190

This is another inverter machine for MMA arc welding, which works even at low voltage in the range of 140-260 V. That is why it is convenient to use it in the country and during the daytime, when surges in the network are especially noticeable. The model is universal and cooks both thin sheets and channels up to 1 cm thick. The device quickly catches the arc and supports instant ignition.

The equipment is connected to the mains, but due to the short 1 m cables, it may require carrying. They are quite thick and can withstand critical temperatures well. Durable metal housing increases service life; Despite its materials, the product weighs no more than 5 kg. In general, the inverter is safe for humans; the main thing is to protect it from various debris getting into the cooling holes to avoid short circuits.

Advantages

You can safely work for 5-6 hours without a break;
Power is 5500 W;
Doesn't make noise;
Excellent cooling;
There is an easy-to-carry handle;
Dimensions – 32 x 33 x 38 cm.

Flaws

No carrying case.

Caliber Micro SVI-205

...Testing has shown that the included belt is not very large and you cannot hang the equipment on your shoulder when welding due to blocking one of the cooling holes...

Expert opinion

A simple household inverter for performing simple work - welding wickets, gates and other non-massive structures. The quality of the seam is quite good, but Caliber Micro SVI-205 still does not take stainless steel very well. The equipment is powerful enough for home use, 3.6 kW, and if necessary, this indicator can be adjusted taking into account the appropriate scale.

Those who want to choose a good welding inverter for home should pay special attention to Caliber Micro SVI-205, in particular, due to its weight of 2.6 kg, small size, and ease of transportation. With small dimensions, it has a wide current adjustment range of 10-205A. Thanks to this, almost all types of work can be carried out, which guarantees their effectiveness both in the case of thin parts and bulky, thick workpieces. It allows the use of electrodes with a thickness of 1.6 to 5 mm, which is typical for manual arc welding.

Advantages

Convenient to use;
Easy;
Compact;
Simple arc ignition;
Brews smoothly and confidently.

Flaws

The wires get a little hot and are not long enough.

Krüger 300 A

Machine for manual arc welding thanks to the presence of a powerful inverter. It differs from similar devices in the presence of an informative display and the ability to smoothly adjust the arc force.

Power consumption reaches 5 kW. Power supply: 220 V, permissible fluctuations up to 15%. The current can be adjusted within 20-300 A using a special regulator, the data will be displayed on the screen. The model is compatible with electrodes with a diameter of 1.6-5 mm.

The shock-resistant case weighing 3.6 kg is equipped with IP21 protection. Powerful ventilation prevents overheating. “Antistick” is an anti-stick option that prevents sticking to the metal surface.

Advantages

Hot start;
Smooth current adjustment;
Informative display;
Anti-sticking;
Shockproof housing;
Possibility of operation from a generator.

Flaws

No case;
Length of wires.

The kit includes the necessary grounding cables with reinforced plugs, a brush for cleaning slag, and a chameleon protective mask. For convenience and transportation there is a shoulder strap and a comfortable handle.

Aurora Stickmate 200

The main advantage of this welding machine is its versatility, it successfully performs both MMA and LIFT TIG welding. The equipment is energy efficient and maintains a stable arc even with not very stable voltage, which is especially important in private homes. It is used for welding copper, non-ferrous metals, hydrocarbon and stainless steel, and various alloys.

This model is compatible with cellulose, basic and rutile coatings, and also supports various types of electrodes. Thanks to the ForceArc function, the likelihood of them sticking is reduced to zero and the quality of the seams is improved, and the Antistick option is responsible for automatically reducing the current in emergency cases, provided that the previous parameters are maintained.

Advantages

Smooth start;
Works effectively in electrical networks with strong voltage fluctuations;
Can be used with a cable up to 50 m long;
Wide operating temperature range: -20 to +50 °C;
The diameter of the electrodes used is 1.6-5 mm;
Sophisticated cooling system.

Flaws

Weighs 6 kg.

Reviews show that the electrode rarely sticks, but this can happen if it gets very hot.

The best machines for spot welding

The most powerful

Wester TIG 220

pros

Produces good current
There is power reserve
The arc burns steadily
The electrode does not stick

Minuses

Not very good cables included

From 14,000 ₽

A device with compact dimensions and light weight. The assembly is reliable. Allows you to cook any surface with argon. Produces power of 9.5 kW. Cooks quickly and evenly. The device weighs about 8 kg. Electrode diameter from 1.60 to 5 mm. It ignites an arc at a high frequency, which allows you to achieve what you want in just one touch.

Fubag IN 316 T

pros

Multifunctionality
Three-phase power
High power
Good level of insulation

Minuses

High price
Heavy weight

From 40,000 ₽

A model with adjustable arc force that is capable of welding even the most difficult materials. A power of 10 kW is enough to carry out any work. The device produces a maximum welding current of 255 A during continuous operation. It supports working with electrodes up to 6 mm in diameter.

The best professional welding inverters

Such devices are used both at home and at small production sites. Compared to household models, they are somewhat more powerful and have expanded functionality - complemented by the option of arc stabilization, automatic current change, etc. An analysis of 10 products showed that 4 welding inverters presented in this category cope best with their tasks.

Fubag IR 200

The Fubag IR 200 professional welding inverter is included in the rating due to its stable arc, good performance even in low voltage conditions and ease of use. Like previous models, it is designed for manual welding (MMA), the most common method today. The equipment is designed for 200 amperes, that is, there is a small reserve that allows it to make holes even in thick metal workpieces.

The most suitable electrode for this model is rutile-cellulose OK46.00. The welding inverter itself can easily withstand a “five”, and a “three” is generally easy for it, while during operation of the device users do not notice any overload. The product does not overheat with good performance, although it has only one cooler in the rear.

Advantages

Affordable price;
Can work without breaks for a long time;
Insulating materials are resistant to temperatures up to 180 degrees;
The optimal open circuit voltage for manual arc welding is 65 V;
High quality seam;
Confident ignition.

Flaws

The power cables are a bit short;
The fans are a little noisy.

Fubag IR 200 resists dirt well, but over time, dust can still settle on equipment components, which can lead to the need for equipment repair.

Elitech IS 250PN

The Elitech IS 250PN inverter machine is designed to produce strong seams using three types of welding: semi-automatic flux-cored wire and conventional gas-shielded wire, as well as manual arc. The maximum diameter of suitable electrodes here is 5 mm; consumables are supplied using a special mechanism built into the housing.

The semi-automatic Elitech IS 250PN stands out in this rating for its ease of operation and compactness, which is especially useful in small spaces. It weighs 12 kg, so it can create some difficulties during transportation, although there is a special handle for such a case. The device is well cooled by air, which prevents overheating of the case.

Advantages

Can operate at mains voltage 160-240 V;
The screen is made of plastic, protecting the controls from dust and moisture;
Cooks well both with and without gas;
Easy arc ignition;
Diameter of suitable wire – 0.6, 0.8, 1.0 mm;
Power is 5.3 kW.

Flaws

Not detected.

In the rating of the best Elitech welding inverters, the IS 250PN is also interesting because the basic configuration includes a 3 m long network cable with an electrode holder. Reviews note that it is quite elastic, does not curl and hardly heats up even during long-term operation of the device without interruption.

FoxWeld Master 162

Functional inverter device with additional options: Hot Start, Arc Force, Anti-Stick protection. All this allows you to use it as efficiently as possible when processing materials of various thicknesses. The minimum diameter of the electrode here is 1.6 mm, the maximum is 4 mm when oriented exclusively towards the manual arc. Good seam quality is guaranteed by the use of direct current.

When creating FoxWeld Master 162, materials with good insulating properties were taken, protecting the product from overheating, overload and, accordingly, failure. A wide and fairly long strap allows you to fix the device on your shoulder. It also has a reliable handle for easy transportation, which is greatly facilitated by its weight of 5.5 kg. Information about the current settings is displayed on the digital display.

Advantages

Large numbers on the screen;
Easy to read display;
Cooks gently;
Works quietly;
Durable and long rubber wires.

Flaws

Welding quality may deteriorate at temperatures below -12 degrees.

Reviews say that over time the fan may begin to hum, and to eliminate this problem it is enough to lubricate it.

Wester MMA-VRD 180

An inexpensive inverter that is used both at home and by professionals. It continues to work reliably even when the network voltage drops, and also has a digital display that displays data about the settings. It is comfortable for even a less experienced specialist to work with the device due to the built-in “Anti Stick” and “hot start” functions. With its help, almost any welds are made with a variety of electrodes. He cooks stainless steel, aluminum, copper, cast iron.

Advantages

Diameter of compatible electrodes – 1.6-5 mm;
Weight – 6.3 kg;
High-quality electrode holder;
High insulation class – H (180 C°);
Withstands heavy loads – 70%;
Supports current from 10 to 180A.

Flaws

Under the 3-year warranty, service is not possible in all situations.

Wester MMA-VRD 180 is quite powerful, but this figure depends on the load, for example, at 100% it is 8.5 kW.

Semi-automatic welding type

Svarog REAL MIG 200 (N24002N)

pros

Convenient burner
Hose with clamps included
Great design
Easy setup

Minuses

Low voltage
No current indicator

From 25,200 ₽

Semi-automatic model with the ability to weld thick pipes to metal structures. The device is not sensitive to voltage changes, which will help when used in the country. The ability to change the polarity of the current and the inductance function are available. Idle run and afterburning of welding wire are provided.

RESANTA SAIPA-200S

pros

Welding in inert and active gases
Light weight
Low cost
Overload protection
Convenient design of wire feeding to the gun with gas dosing valve

Minuses

Not the most convenient setting

From 20,200 ₽

Welding and inverter with a power of 6.60 kW. Uses wire with a diameter of 0.80-1 mm. Electrode diameter 5 mm. Capable of operating at temperatures from -10 to 40 °C. Even in cold weather, the functionality of the device is at its best. The weight of the device is 10.75 kg.

Fubag IRMIG 180 38608.3

pros

Cheapness
Euro connector
Durability
Suitable for beginners

Minuses

Low power

From 17,900 ₽

Semiautomatic with current from 30 to 180 A. DC output current power 6.60 kVA. The device is capable of working with wire with a diameter of 0.60-0.80 mm. With an efficiency of 85%, the inverter ensures high-quality welding of surfaces. Capable of operating at temperatures from -10 to 40 °C. The kit includes instructions for use, a burner and a grounding cable.

The best industrial welding inverters

The 4 best welding inverters in terms of performance have been added to this section. The main criteria for their selection were power, high level of efficiency, safety, functionality and ease of use. The key difference between industrial options and household and professional ones is power supply from a three-phase network with a voltage of 380V.

Svarog ARC 315 (R14)

The device is designed for intensive use in industrial conditions, which it can withstand due to its high power of 12.8 kVA. Unlike previous models, this device is designed to operate in three-phase networks with a voltage of 380V (±15%). It consumes about 20A when welding with an electrode with a diameter of 3 mm. Thanks to the wide range of 20-315A in MMA operating mode, even thick sheets can be welded efficiently.

The device has a well-thought-out cooling system that includes two fans. It features reliable arc ignition due to the “hot start” technology, which also ensures its stability. The device carries out welding with any types of electrodes and is equipped with an LCD display with an informative control panel, which simplifies its use.

Advantages

The warranty is given for 5 years;
Open circuit voltage – 69V;
Sheet steel housing.
There is almost no splashing;
High degree of protection against electric shock.

Flaws

Weighs 22 kg;
High price.

Since this welding inverter is industrial, it requires connection to an industrial network.

Foxweld VD-400I

The industrial type of inverter here is indicated by its power supply from a three-phase 380V network and extended functionality. The device has reduced energy consumption and, thanks to tunnel ventilation, is ready for use in difficult conditions. It also protects it from dust, dirt, snow, splashing water and increases its service life. It is characterized by flexible settings; you can control the arc parameters and regulate the current.

Setting current parameters is quite simple due to the digital display of considerable size. Also on the case there are two regulators for changing settings, but you can control the device using the included remote control, which is rarely offered by other companies. Good results are guaranteed by high efficiency - 85%. Foxweld VD-400I has an ignition and afterburner function, which makes the use of the equipment more efficient.

Advantages

Safe when working in wet conditions;
Suitable for high-rise installation work;
Cooks with any electrodes;
Takes stainless steel, cast iron, steel, aluminum;
High-quality electrode holder;
The cable does not heat up.

Flaws

Large-sized;
High price.

In the rating of the best welding inverters, Foxweld VD-400I has a well-thought-out safety system; for example, when working in wet conditions, the device automatically switches to VRD mode and reduces the no-load voltage to 13V instead of 72V, reducing the likelihood of electric shock.

Cedar MultiARC-3200

The Kedr MultiARC-3200 device is industrial and combines multitasking, high performance and ease of management. It has arc force and hot start functions that increase work efficiency, and the VRD mode is relevant when performing complex welding. The device uses materials with good insulating properties that can withstand the effects of negative environmental factors.

With the help of Cedar MultiARC-3200, you can process products with both thin and thick walls due to the extended current range - from 20 to 320A. It operates at a power of 11.16 kVA, guaranteeing high performance. Such parameters allow it to be used in the energy sector, oil industry, etc.

Advantages

Two handles on the sides;
Improved cooling system;
100% performance at low voltage;
Reliable MMA and Lift TIG welding;
Protect the display with a transparent cover;
High quality electronic components.

Flaws

High price;
Weight is 19 kg;
The control panel is not very large.

Brima ARC 400-1

The Brima ARC 400-1 inverter machine is used for manual arc welding with a high melting point electrode (MMA). It is intended for use in the mechanical engineering, chemical, oil and gas industries. The device requires connection to a three-phase network with a voltage of 380V. The equipment is convenient to use - sticking of the electrode is eliminated by increasing the current at its first contact with the surface, and the likelihood of splashing is minimized.

This model produces a high-quality seam, which, in particular, is possible due to the hot start function and ease of current control using IGBT technology and the corresponding regulator. This happens smoothly, on a scale from 40 to 380A, which eliminates the risk of overheating and failure of the device. If there is a deviation from the norm, the user receives a notification on the front panel.

Advantages

There is a simple control panel;
Durable network cable;
Reliable source grounding;
Withstands high loads well;
Automatically turns off when the permissible values are exceeded.

Flaws

The handle on the body is not large enough;
Considerable sizes.

Brima ARC 400-1 operates at a power of about 16.5 kVA, which ensures a high level of work quality.

Fast and Furious 301 NAKS

The welding inverter in the ranking of the best models is distinguished by high power, good seam quality, easy ignition and stable arc support. It is suitable for continuous operation without interruption in difficult conditions and can be powered by autonomous power plants with a capacity of 20 kVA. The device is reliably protected from dust, the accumulation of which prevents the sealing of the case and the efficient operation of the built-in fan. He is also responsible for the timely cooling of parts, which prevents this model from failing.

Forsazh 301 NAKS is suitable for performing professional electric arc welding manually and processing with a non-consumable electrode in a protective atmosphere of inert gas. Due to its small dimensions, it is easy to transport, and the length of electrical cables can be increased to 105 m, which is especially convenient when working in field conditions. Low energy consumption ensures cost savings; it contains all the necessary functions for efficient operation - “hot start”, “arc force”, “anti-stick”, etc.

Advantages

Remote control;
Automatic shutdown when permissible parameters are exceeded;
Wide functionality;
Electronic stabilization of the welding arc;
Good performance;
Two information displays.

Flaws

It’s not easy to understand the settings the first time;
High price.

The best micrometers

Which welding inverter is better to choose?

For use at home, models with a power of 4 kW or more are most often chosen, powered by a single-phase network with a voltage of 220 V. At industrial facilities, devices are used to connect to three-phase networks at 380 V. In production conditions, semi-automatic devices operating in a protective gas environment are used, which are the most expensive. For the purpose of operation in the country or in a city house, inverters for manual welding with coated electrodes are purchased.

Here is which welding inverter is best to choose depending on many factors:

At home, Bison “Master” M1, Resanta SAI-190, Caliber Micro SVI-205, Krüger 300 A are suitable for manual welding with direct current.
To perform simple work by professionals, you can choose Fubag IR 200, Elitech IS 250PN, FoxWeld Master 162.
In order to carry out more complex welding, you can buy a fairly powerful Wester MMA-VRD 180.
To operate in three-phase networks with a voltage of 380V, Svarog ARC 315 (R14), Foxweld VD-400I and Brima ARC 400-1 are used.
High-quality argon-arc and manual arc welding will be provided by Forsazh 301 NAKS.
For semi-automatic work, it is recommended to purchase Kedr MultiARC-3200.

By choosing the truly best welding inverter, you can make your work much easier and do it better.

Argon arc welding type

Fubag IN 226

pros

High quality build
Ignition of the arc by touch
Light weight
Availability of all necessary functions

Minuses

Anti-stick doesn't work well

From 15,600 ₽

The top of 2021 will start with a mid-class welding inverter, equipped with all the necessary functions. There is the possibility of hot start and arc forcing. Additionally, the hot start can be adjusted, thus adjusting the device to specific operating conditions. The weight of the device is only 3.5 kg.

Aurora SPEEDWAY 180

pros

Well-chosen welding parameters in the firmware
Small dimensions
Relative lightness
Easy to use

Minuses

Not suitable for thin aluminum
Lack of error code information

From 29,000 ₽

Inverter for home or garage use. A decent device that works with thick wire. With a power of 7.10 kW, it ensures stable arc operation even with intensive use. Equipped with a MIG torch; a cable with a ground clamp and a cable with an electrode holder. Additionally, there is an anti-stick function that improves the quality of work.

Solaris MULTIMIG-228 (MIG-MAG-TIG) with TIG torch

pros

Metal wire drawing system
Heated gearbox socket
Good equipment
Functionality
Relatively low cost

Minuses

Lack of instructions

From 26,300 ₽

An excellent device in terms of price-quality ratio. The device is not professional, but is quite suitable for beginner welders. The model will easily withstand periodic work at home. The settings are simple and clear. For its price it has good characteristics and durability.