TOP 10 best lines for trimmers: pros and cons, reviews

Criterias of choice

Thickness

This setting depends on the specifications of your trimmer. Either too thin or too thick a line can cause premature engine wear. In the table below you can see which fishing line is used in various devices.

Material of manufacture

Various materials can be used:

• Nylon.
• Coaxial thread.
• Nylon with added aluminum, graphite or steel core.

Of course, the most common is nylon. It is cheaper, often used by manufacturers, and tolerates mechanical loads well. Coaxial thread is stronger and lasts longer. There is no need to buy too cheap products, since polyethylene is used for their production; it wears out faster and requires replacement.

Adding a steel rod or reinforcing line makes it possible to cut not only grass, but also shrubs. This fishing line is wear-resistant and has a long service life.

Section

The operation of the device depends not only on the thickness and material, but also on the cross-sectional shape of the fishing line.

The following section shapes can be used:

• Round.
• Square.
• Rectangular.

• Spiral.
• Star.

Each of them has both its pros and cons.

Features of the round cross-sectional shape

Advantages:

• Received the greatest distribution.
• The grass cutting is of good quality.
• Has a cheaper price.
• Consumes slowly.
• Can be used on all types of trimmers.

Flaws:

• It creates a lot of noise while mowing.
• Works well only with young grass; For old, tough stems or bushes, it is better to use other types of fishing lines, for example, spiral.

Features of rectangular or square wire

Advantages:

• Smooth, high-quality mowing.
• Usually used in more powerful devices.
• Copes with dry old grass and branches, especially if it has a metal rod in addition.
• Creates less noise.

Flaws:

• Fishing line with sharp edges breaks faster.
• Has higher consumption.
• A special winding disk is required.
• The cost of such a cord is higher, especially when reinforced with a metal rod.

Manufacturers use fishing lines of various cross-sectional shapes to increase the performance of the device. These can be veins in the form of a cross, star, or polygon. As one of the options, a figured fishing line with notches or in the form of a spiral is used. Such fishing lines create less noise and remove grass very efficiently, but they are less durable, break faster and therefore consume more.

Wear-resistant, reinforced cords are very reliable and durable, but they are expensive and are used only in very powerful, professional devices. They are good for cleaning areas such as grass near highways, rocky areas and slopes.

What materials are used to make cord?

Various synthetic compounds are used to make consumables. One of the best options is nylon; the product is based on polypropylene and polyamide.

The main advantages of this material include:

• Strength. Most buyers prefer this option only because of this indicator, but it is impossible to achieve it without proper storage. Do not leave nylon fishing line in the sun or in a room with negative temperatures. This breaks the chemical bond and the cord breaks almost immediately.
• The second advantage is lightness. The indicator has a positive effect on maximum speed. This makes it possible to mow more and more efficiently.
• Even if the product bumps into a stone or metal while cutting grass, there will be no serious damage, since the cord is completely resistant to mechanical stress.
• The last advantage that will be decisive for many is low cost. In addition, fishing line is sold at many hardware stores, so it is easy to find.

But even in this case, there are fakes, for example, when the composition contains additional materials or, even worse, cheap polyethylene. The main disadvantage of this solution is rapid wear, which negatively affects the quality of mowing. To avoid this situation, it is recommended to buy original models, although the cost will be a little more expensive.

If a person constantly works with vegetation where thick stems are present, it is better to give preference to a 2.6-3.3 mm cord. Most of these products are made of hard graphite or special steel rods. This solution has a beneficial effect on the strength and increases the service life of the material. So it doesn't change that often. However, when working with fishing lines, it is important to follow safety rules, otherwise you may get injured.

Stores also sell thin cords containing metal particles. Thanks to this, the strength indicators increase, which affects the cutting efficiency, so a person can quickly clear the area of ​​thickets.

Selection tips

1. The chosen line must match the power of the trimmer. A thread that is too thin or thick will cause premature engine wear.
2. Before operation, carefully read the instructions and become familiar with the technical characteristics of your device. This will help to avoid quick breakdowns and choose the right cord.
3. Some trimmer models can accommodate blades or discs, but not all. If your device is not designed to accommodate a knife, it simply will not support it and will break.
4. You can not put all the fishing line into the device at once, but use small pieces.

Engine type and power

First of all, it should be said that gas trimmers may differ in the type of engine installed on them. It could be a two-stroke engine, or it could be a four-stroke engine. The most common is the two-stroke engine, in which gasoline must be mixed with oil. Petrol trimmers with a four-stroke engine are less common, and they are more expensive. One of the advantages of a 4-stroke engine is that it has a longer service life compared to a 2-stroke engine, it vibrates and makes less noise during operation, and also does not require the preparation of a fuel mixture, since the oil in it needs to be changed only once every 50 engine hours The downside is that it cannot be tilted more than 45 degrees, since oil is poured into the crankcase, and as a result of such a tilt, it can leak where it shouldn’t.

There are also 4-stroke engines where the lubrication system is organized in such a way that gasoline, like 2-stroke engines, is mixed with oil. Accordingly, such an engine has the advantages of both types, but, however, the price of such equipment will be quite high.

Two-stroke engines can also differ from each other. They come with molybdenum or chrome coating on the piston or cylinder walls, or both. Or they may not have such coverage at all. Gasoline trimmers from well-known manufacturers, such as Stihl, Husquarna, Hitachi and others, have such coatings. The motors of numerous Chinese devices from the cheap segment are made without coating. It should be noted that engines coated with chromium or molybdenum, coupled with the use of higher quality alloys for their manufacture, last 2-2.5 times longer than engines without coating. Therefore, when buying a trimmer from a well-known manufacturer, you, in fact, do not overpay at all, since for 1.5-2 times more money you get a trimmer with at least twice the engine service life. And in combination with more reliable other components, buying a trimmer from a reputable manufacturer saves you from possible unnecessary trips to the service center.

Types of fishing line for trimmers/mowers

Subscribe to our channel: ? Watch similar videos: In this video we

The right line for the trimmer

How to choose a good fishing line for a gas-electric trimmer.

And, of course, you should pay attention to the engine power. The more powerful the engine, the more confidently the fishing line or knife bites into dense thickets. To maintain the area in an unovergrown condition, trimmers with not the highest power are enough. For mowing, for example, grass for hay, it is better to take something more powerful (from 1 kW).

Based on the above, you can determine what is more convenient and necessary for you and choose a gas trimmer with the type of engine you need.

The best manufacturers

ARNETOLI MOTOR

The Italian manufacturer has been manufacturing trimmers and equipment for them for more than 20 years. The choice is very wide; the consumer can choose the model for himself based on power, diameter and cross-section of the fishing line.

Advantages:

• Introduction of new technologies.
• High quality equipment.
• A wide range of.
• Affordable price.
• The line is wear-resistant, durable and lightweight.
• Low noise level during operation.

Flaws:

• High price.

The line with the star section is in greatest demand.

OREGON

The American manufacturer is the world's leading developer of trimmer lines. To make it easier to differentiate between types of products, they are painted in different colors. This is one of the main advantages of the large number of products produced.

Advantages:

• Reels are available both in small winding and in coils.
• High quality wire.
• Using different models.
• Particularly durable series are designed for any vegetation, even thorny bushes.
• Series of different profiles, diameters and compositions differ in color.

Flaws:

• Considerable cost.
• With a long storage period, the fragility of the fishing line increases.

In Russia, fishing lines of square and polygonal cross-section have become the most popular. They provide the highest quality, even mowing of lawns.

CHAMPION

The Chinese company, despite its youth, has already conquered the market thanks to the optimal price-quality ratio. Raw materials for products are supplied from other countries: India, USA, France. The company produces both the equipment itself and branded cords for it.

Advantages:

• Affordable price.
• The quality of the fishing line is rated by consumers as the best among budget models.
• Reels are available in different winding lengths.
• The models are equipped with a special knife for cutting.
• For convenience, the fishing line is available in a variety of colors.
• The wear-resistant core consists of two layers of material and has a twisted structure.

Flaws:

• It makes a loud noise when working.
• When the device heats up too much, the ends of the fishing line begin to melt.

HUSQVARNA

The famous Swedish company has been producing garden equipment for more than 400 years. It has won global success thanks to the high quality of its products. The line is produced both complete with trimmers and separately from them.

Advantages:

• Large assortment of goods.
• Reels and coils of various windings.
• High wear resistance.
• The line is compatible with any trimmer heads.
• The special shape prevents breaking, fraying of ends and their melting when heated.
• Many options for silent fishing line.

Flaws:

• High price.

STURM

The young German trading concern has been supplying its products to the Russian market for only 15 years. The production itself is located in China, which reduces the cost of production. The fishing line is available in reels, coils and coils, and has different colors for ease of selection.

Advantages:

• Affordable cost of fishing line.
• Various winding lengths.
• There are especially strong cords with a steel core.
• The company has a system for checking product quality.

Flaws:

• There is no division of products into series.
• The fishing line can be sold without packaging.

REZER

The ranking of the best also includes a domestic manufacturer of fishing line for trimmers. The company produces three main series of cords: with a cross-section in the form of a star, an ellipse and a square. There is also a particularly strong heptagonal fishing line. The reels have a winding from 15 to 114 m.

Advantages:

• Low cost.
• High quality grass cutting.
• To protect against heat, the fishing line is coated with heat-resistant material.
• Possibility of choice by color.
• Low noise level during operation.

Flaws:

• It wears out and breaks quickly.
• Not intended for rocky areas.

ECHO

Speaking about manufacturers of garden equipment, one cannot help but recall the Japanese company ECHO. It produces light agricultural equipment and fishing line for it. The company offers several lines of its products. It differs in color, different cross-sectional shape and thickness.

Advantages:

• Mows any plants.
• According to manufacturers' reviews, it is of excellent quality.
• Universal application.
• The cord is resistant to breaks and abrasions.
• Available in convenient form in coils and coils starting from 10 m.

Flaws:

• Products are not often found on free sale, as they are quickly sold out.
• A fishing line with a thick section unwinds more slowly.
• It has a high cost.

Thread shape

This is why you have to choose a fishing line not only by thickness, but also by shape: the cord does not cut the stem, but interrupts it. The rotating string repeatedly strikes the surface of the stem and eventually separates its upper part. For such work, the shape of the cutting edge is an important technical characteristic.

• Round is the most common, as it is universal: you can choose it for mowing both fresh and dry grass. It is considered less noisy, especially the spiral one. But this parameter is not important in all cases. The fishing line for a gasoline trimmer can be as noisy as you like, but you still can’t hear it while the engine is running.

• Polygonal - from 3 to 6 sides. A sharp cutting edge works better on rough, thick stems. Thus, a square cord with a cross-section of 2.4 mm is capable of removing raspberry stems. It is worth noting that with higher efficiency, polygonal cord is consumed faster, and it should be used only for its intended purpose.
• Figured - asterisk, ribbed, in the form of a twisted square with notches, and so on. Their “specialization” is different, which it is advisable to find out about in the instructions before choosing. Thus, the star is recommended for mowing fresh grass, since it is less traumatic: the grass does not dry out after cutting, as when using a round string. The photo shows cords with different shapes.

What is important to know when working with fishing line?

In order for the tool to serve you for a long time, you need to know some features of its design, storage and maintenance:

1. When working, the trimmer head should be parallel to the ground so that the line does not touch the ground and stones. It is advisable not to touch hard objects, curbs, fences.
2. Electric trimmers are the most sensitive to moisture, so they should not be used in rain or wet weather.
3. After finishing work, you need to thoroughly clean all parts of the mechanism from dirt, grass, wipe all wires and fishing line so that the next time everything functions well.

Advice from experienced owners

How often do you have to change the line on your trimmer?

Constantly! Rarely

To ensure that the tool serves you for a long time and fails as little as possible, follow the advice of experienced summer residents.

• Carefully read the technical data sheet of your product to use fishing line of the correct diameter and cross-section.
• Different cords are used for different grass.

• An excessively thin string will wear out and break faster, which reduces the performance of the device as a whole.
• A core that is too thick also makes the work ineffective, as the load on the engine increases, which may not be able to withstand it and burn out.

Why brush cutters?

This type of gardening equipment is designed for not too large areas, where maneuverability is more important than productivity. If we are talking about the same flower bed, then cutting the grass in close proximity to the flowers using a wheeled lawn mower is unrealistic. A trimmer, electric or gasoline, will do the job perfectly.

The essence of its work is this: the fishing line or knife rotates at a fairly high speed and cuts the stems. A string or cord is used specifically for cutting grass. Which trimmer line is best depends on the task. For soft and hard grass, respectively, you need cord with different technical characteristics.

Conclusion

Thus, we can summarize all of the above and note such important factors in choosing a line for a trimmer.

1. When buying fishing line, carefully read its thickness, composition and cross-sectional shape. Buy exactly the model you need for your device.
2. Pay attention to the best manufacturers. When you receive a cheap product, you risk purchasing low-quality products.
3. Carefully care for the fishing line, wipe it after use, clean it of juice, grass and dirt so that it lasts as long as possible.

A clean and well-groomed lawn demonstrates the owner’s hard work. Therefore, by following all the tips outlined above, you will be able to purchase just such a fishing line that will serve you for a long time and be reliable and of high quality.

Section types

There are a lot of types of fishing line, you don’t have to pay attention to the color - there are no general “color-characteristic” standards as such. The type of string section becomes an important factor; it is chosen depending on the type of grass.

1. The circle is a universal fishing line
   . Smooth lines have a higher noise level when mowing; twisted lines, on the contrary, mow more quietly, but are consumed faster (like any type of twisted line).
2. Square or polygon
   . This fishing line is more effective than round fishing line - sharp angles cut stems faster and better.
3. Star, ribbed or twisted square
   . Has maximum cutting efficiency and speed.

It is important to know! It is strictly forbidden to use metal wire, cables or rods instead of fishing line. Such equipment easily cuts even leather shoes and can seriously injure the operator.