Rating of miter saws with broaching for the home 2021: selection, reviews

A miter saw with a broach is relevant for the home and carpentry workshop.

It is used to make cross-sections of workpieces at any inclination and angle, sawing wooden blocks, composite materials, as well as plastic and metal profiles/pipes.

This saw will be an excellent help when carrying out construction, finishing or repair work.

After studying numerous consumer reviews and expert opinions, we have compiled a rating of the best miter saws. Each model presented is accompanied by a brief description, as well as a list of pros and cons.

Page navigation:

How to choose the right broached miter saw for your home

A miter saw, or miter saw, is a construction tool that allows you to make a cross-section of workpieces at a certain angle. When choosing a device, you need to look at several points.

engine's type

Miter saws are equipped with 3 types of engines:

• asynchronous;
• collector;
• brushless.

If possible, it is recommended to choose the last 2 options; due to the high power reserve, they are suitable for any work.

Gearbox

This element is responsible for the connection between the blade and the miter saw motor. The gearbox can be:

• with belt drive;
• with gear transmission.

Which option to choose depends on the user's goals and capabilities. It should be taken into account that the belts in the unit will have to be changed more often, but it will cost less. The gears will wear out more slowly, but when they do fail, it will cost a lot of money to repair or replace the entire gearbox.

The effectiveness of a miter saw depends on the quality and thickness of the cutting blade.

Saw blades

It is customary to pay great attention to the choice of discs; they are responsible for the functionality of the miter saw. They differ from each other:

• by diameter;
• by material;
• by thickness;
• by number and size of teeth.

Advice! For the most accurate cutting, you should choose carbide bits with frequent and fine teeth; they do not “tear” the wood.

Power

On average, the performance of a miter saw motor can be around 2.5 kW. If you will use the tool infrequently, you can choose a medium-power model up to 1.5 kW with compact equipment. For serious work, it is better to buy units with maximum motor performance.

Number of revolutions

When choosing a miter saw with a broach, you need to pay attention to the speed of the unit, the quality of the cut depends on it. Basically, the indicator varies between 3200-6000 rpm; some models provide frequency adjustment.

Additional options

High to mid-priced miter saws come with a variety of advanced features. Among the main ones we can list:

• built-in dust removal system;
• cutting depth limiting function;
• backlight;
• laser marker;

A laser marker allows you to make the most even cut.
A smooth start is responsible for the tool itself, it protects the motor from overheating and increases its durability.

Which miter saw to choose for installing doors

Very often, trimmers are used when installing doors to accurately cut trim and other elements. You need to choose models that support several cutting angle positions - 45, 90, 30 °. A laser pointer will be useful to improve accuracy.

Saw with broach - what is it and the principle of operation

A miter saw with a broach is useful when working with lining and when laying out skirting boards and baguettes, as well as when carving narrow boards, slats, and bars.

The base includes handles with a switch and a working circle with an electric motor, mounted on the base.

A functional module is mounted on parallel slats, ensuring free movement of the saw blade directly during operation.

Thanks to the broaching mechanism, it is possible to work even with the widest boards in one go, without wasting extra time.

Top 3 best combination miter saw models

Combined units are units that simultaneously combine the capabilities of end and circular equipment. It is reasonable to buy them for a home or commercial carpentry workshop and regular wide-profile work with wood; the devices are expensive.

DeWalt DW743N

The combined machine is a professional type and is equipped with a 2000 W motor. It copes well with processing not only wood, but also plastic, laminate and soft metal. Equipped with an effective dust removal system, if necessary, quickly transforms into a circular saw.

DeWalt DW743N price starts from 50,000 rubles

Metabo KGT 501

The combined device is equipped with a powerful 2000 W asynchronous motor and a disk with a diameter of 250 mm. Makes little noise and provides a clean and accurate cut. The model comes with a rotating aluminum table that supports height adjustment.

You can buy a combination saw KGT 501 from Metabo from 57,000 rubles

Makita LF1000

The combination unit combines the capabilities of a miter saw and a sawing machine. Equipped with a 260 mm disc with a cutting depth of 68 mm. The tilt function allows you to process the desired products at an even angle. The device is equipped with a protective casing and an emergency shutdown mode, and is blocked from accidental starting.

The average price of a Makita miter saw is 59,000 rubles

The best broached miter saws from different manufacturers

We present to your attention the highest quality and reliable broach saws. All models have passed the necessary tests and are highly rated in many respects.

Rating of the TOP 5 best miter saws with broaching in terms of price and quality ratio.

BISON ZPT-255-1800 PL, 1800 W

A domestic miter saw with a broach cuts wooden and plastic workpieces with special accuracy.

She can handle even thin aluminum products.

The fine-tooth saw blade ensures an even cut, and the built-in laser pointer ensures precise lines.

The cuts can be made at any angle. It is enough to turn the table and lock it in the desired position.

The presence of an automatically closing casing creates safe conditions when operating the tool. A dust collection bag is also provided by the manufacturer.

Specifications:

• engine power - 1800 W;
• rotation speed - 5000 rpm;
• disc diameter - 255 mm;
• number of speeds - 1;
• design type: tabletop.

Advantages

• High performance.
• Cutting speed.
• Availability of a dust collection bag.
• Build quality.

Flaws

• Crooked table.
• The laser requires constant adjustment.
• No soft start.

BISON ZPT-305-1800 PL, 1800 W

This miter saw is suitable for both home and construction workshops.

In terms of engine power and rotation speed, it is practically not inferior to the above-presented model, and in some ways even surpasses it.

For example, a saw has a built-in soft start function. The possibility of connecting a vacuum cleaner is also provided by the manufacturer.

Power is supplied from the network. The warranty is provided for 5 years.

Plus, the tool is equipped with a laser marker and a dust bag. This makes it easier to operate the saw and allows you to carry out construction/repair work with maximum comfort.

Specifications:

• power consumption - 1800 W;
• rotation speed - 4000 rpm;
• tool weight - 18 kg;
• design - tabletop;
• vacuum cleaner connection - yes.

Advantages

• High performance.
• Cutting accuracy.
• Vertical cutting depth.
• Build quality.

Flaws

• The power is lower than stated in the instructions.
• Loud noise during operation.
• The laser is constantly clogged with sawdust.

RESANTA TP-255PL, 2200 W

The RESANTA TP-255PL miter saw guarantees high-quality cutting of wooden, plastic, aluminum and some other types of workpieces (with millimeter accuracy).

Thanks to the protective casing, the user is completely safe while operating the tool.

The product comes with a dust bag, which ensures cleanliness and comfort in the workplace.

For accurate markings during construction/repair work, the manufacturer has provided a laser marker and backlighting of the device. There are no other useful options.

Power is supplied from the network.

Specifications:

• engine power - 2200 W;
• rotation speed - 5000 rpm;
• disc diameter - 255 mm;
• type of design - tabletop;
• tool weight - 15.1 kg.

Advantages

• High power.
• Speed ​​of work performed.
• Excellent build quality.
• Affordable price.

Flaws

• Errors in laser marking (up to 3 mm).
• Poor functionality.
• Short service life.

Einhell TC-SM 2131/1 Dual, 1800 W

The Einhell TC-SM 2131/1 Dual table miter saw is recommended for sawing wood of various species, as well as plastic and laminate.

The saw head allows for tilting to the right and left.

This provides the flexibility to make cuts at specific angles.

And the presence of a laser marker contributes to the accuracy of marking, marking the right places and thereby preventing the possibility of a technician’s error.

If necessary, the tool can be connected to a vacuum cleaner. There is a dust bag. The rotation and tilt angle is 45 degrees. The device is powered from the mains.

Specifications:

• power consumption - 1800 W;
• rotation speed - 5000 rpm;
• vacuum cleaner connection - yes;
• laser marker - yes;
• tool weight - 10.3 kg.

Advantages

• Cutting speed.
• Adjustment of the saw head in different directions.
• Simplicity and ease of use.
• Acceptable price.

Flaws

• There are small gaps in the sawing angle adjustment.
• The cut is carried out with an error of 2 degrees.
• Requires constant adjustment before use.

RedVerg RD-MS210-1300S (2021), 1500 W

The “RedVerg RD-MS210-1300S” miter saw with a tabletop mount will be an excellent help in the household when performing small construction and repair work.

It has a small engine power, but for private maintenance these indicators will be quite enough.

The model is relevant for cutting wooden and plastic structures. But metal products are too tough for her.

Additional features: connection of a vacuum cleaner and spindle lock. The dust bag is not included and must be purchased separately.

The tilt and rotation angle is 45 degrees. The warranty is provided for 1 year.

Specifications:

• engine power - 1300 W;
• rotation speed - 4500 rpm;
• disc diameter - 210 mm;
• design - tabletop;
• tool weight - 19 kg.

Advantages

• Excellent build quality.
• Speed ​​of cutting small elements.
• Simplicity and ease of use.
• Nice design.

Flaws

• Does not cope with metal structures.
• Low power.
• Loud noise during operation.

Rating of professional miter saws

Professional saws can be both expensive and mid-budget. Their distinctive features include versatility, accurate cutting and good power; productive equipment is capable of working with large volumes of materials.

Makita LH1040F

The unit is double insulated and completely safe for the operator; it can be operated without grounding. Suitable for plastic, laminate and all types of wood. It belongs to the category of the best miter saws for metal because it copes with cutting aluminum profiles. The device is equipped with a fluorescent lamp that illuminates the work area.

The average price of a Makita saw is 28,000 rubles

Metabo KGS 315 Plus

The powerful device is equipped with a 2200 W electric motor and operates at a speed of 4100 rpm. The model is equipped with a dust collector and a laser marker, and supports smooth speed control.

You can buy a professional Metabo saw for 60,000 rubles

Milwaukee MS 304 DB

A professional cross-cutting device is expensive, but provides ample opportunities. The 1800 W motor allows you to cope with any tasks, the disc diameter is as much as 305 mm. The unit is equipped with a dust removal system and dual lighting.

The price of a professional Milwaukee cross-cutting unit starts from 100,000 rubles

How to choose a miter saw and what should you pay attention to?

When choosing a miter saw with broaching, it is important to consider parameters such as:

• Power consumption. The speed and quality of work performed (around the house, in a summer cottage, in a carpentry shop, etc.) depends on the performance of the engine. Therefore, the optimal indicator is 1500-2500 W. The more serious the action plan is, the more powerful the tool should be.
• Number of revolutions. For quick and high-quality cutting of wood, metal and some other types of structures/individual elements, you should choose a miter saw with characteristics from 3200 to 6000 rpm. At the same time, some models allow you to adjust the rotation speed down or up.
• Engine's type. The miter saw can be equipped with a brushed, brushless or asynchronous motor. Builders and carpenters most often choose the first two options, since they are considered universal and suitable for all types of work.
• Width of broach. The higher this indicator, the wider and larger in size the construction blanks used during repairs or finishing work can be.
• Saw blades. The choice of disks should be given the closest attention, because they are responsible for the functionality of the tool. The nozzles differ in diameter and thickness, as well as in material and number/size of teeth. The more frequently the teeth are spaced and the smaller their size, the more accurately and efficiently the cutting of parts/solid structures will be carried out.
• Additional functions. Miter saws that cost above average can have built-in options (dust removal, laser marker, backlight, limited cutting depth, soft start, etc.).

Note! When choosing a product, it is important to take into account consumer reviews and the rating of the manufacturer.

Rating of the best miter saws with broaching for wood in 2021

With conventional miter saws, the cutting range is limited by the size of the blades. But the market also offers models with broaching, in which case the nozzle can move in a horizontal plane along special guides. Due to this, the cutting width increases.

Metabo KGS 216 M

The miter saw is equipped with a broach and is suitable for working with wood and metal. Supplied in an aluminum case, equipped with a laser pointer, LED backlight and material holders. The power of the unit is average, the cutting height is 65 mm.

A Metabo saw costs an average of 16,000 rubles

Bosch PCM 8

In the review of the best models of miter saws, we should mention a German unit with a 1200 W motor and a 216 mm disc. The model is distinguished by very rigid fixation of the working surface and the angle of inclination of the nozzle, giving a clear and even cut. Equipped with a laser pointer and dust removal system.

Important! The unit is not suitable for professional work, but remains one of the best miter saws for the home workshop where increased power is not required.

You can buy Bosch PCM 8 for 17,000 rubles

DeWalt DW713

This universal broach miter saw is powerful and durable. Provides 11 grooves for fixing the workpiece, provides a cut with a height of 89 mm. The model is equipped with a dust collector, a spindle lock and an emergency brake system.

The average price of a DeWalt 713 saw is 23,000 rubles

Rating of the TOP 15 best miter saws with broaching 2020-2021

Top 10 best miter saws with broaching in terms of price, quality and reliability

In the process of studying miter saws, it is worth familiarizing yourself with the most popular models among users. The units demonstrate high cutting quality and last a long time even with constant use.

Makita LS 0714

The compact saw produces 6000 revolutions per minute. Supports swivel and bevel angles, broaching and cutting depth adjustment. Equipped with motor brake and spindle lock.

The average cost of the LS 0714 saw from Makita is 23,000 rubles

Hitachi C10FCE2

The 5000 rpm tool is equipped with a 255 mm blade and provides an inclined cut. The device is equipped with a dust removal system, and the kit includes a clamp for fixing the workpiece.

A medium-power miter saw from Hitachi costs 21,000 rubles

Enkor Corvet 4 430

Powerful 4800 rpm miter saw supports swivel and tilt and provides cutting depth of 75mm. Supplied with a laser marker and a dust bag, as well as 2 table extensions.

The Enkor Korvet saw is presented in stores starting from 13,000 rubles

Graphite 59G806

One of the best cheap broach miter saws has a 1800W motor and a 210mm blade. It can make cuts at 90 and 45 °, in the first case the depth is 65 mm, and in the second - 35 mm. Equipped with a dust collector and laser.

Attention! Among the disadvantages, users note the lack of a soft start, which protects the engine from wear.

You can buy a Graphite saw for 12,000 rubles

Hammer STL1800/250C

A good quality miter saw with an 1800W motor supports a 45° table rotation for miter cuts in both directions. Supplied with extensions and clamps for fixation, and a dust bag. The diameter of the cutting attachment is 250 mm.

The Hammer saw sells for an average of 14,000 rubles

Kolner KMS 210/1400

A budget saw with a low power of 1400 W is equipped with a 210 mm blade. It can reach a speed of 5000 rpm, but does not support frequency adjustment.

Kolner miter saw costs 4,400 rubles

Wert MS 1321

In the rating of inexpensive miter saws with broaching, 1st place can be given to a model with a power of 1300 W and an angular inclination of the attachment. At low productivity, the unit develops a speed of 5000 revolutions and makes neat and precise cuts.

You can buy a Wert miter saw for 3,800 rubles

JET JSMS-8L

The productive wood unit is equipped with a 1500 W motor with a braking system. There is a laser cutting line marker, precise adjustment of rotation angles and a broaching function. The kit also includes clamps and stops for fixing the material.

You can buy a JET miter saw from 17,000 rubles

Evolution Rage3-S

A mid-budget professional saw suitable for processing plastic, aluminum and wood. It has a moderate power of 1500 W and a disk with a diameter of 210 mm, equipped with a laser and a dust collector. It makes 3750 revolutions per minute, very effective when working with hard materials.

The Evolution miter saw costs about 32,000 rubles

Elitech PT 2030K

Powerful tool with 305 mm disc works at 90 and 45° angles. It is equipped with a table extender for large workpieces and occupies a good place in the rating of telescopic miter saws. The engine is protected from wear by a soft start system.

You can buy Elitech PT 2030K for 13,000 rubles

TOP 5 best miter saws with broaching by price, quality and reliability for 2021

Metabo KGS 216 M

The classic miter saw is suitable for both beginners and amateurs, as well as for professional use..

High precision of work is ensured not only by the bright LED backlight and laser pointer, but also by the size of the cut, a large number of settings and ease of use.

The ergonomics of the tool are added to the design features, thanks to which all controls are in the operator’s field of vision.

The tool is equipped with retractable extensions, a collector for dust and shavings, and the ability to connect a vacuum cleaner for a cleaner workplace.

The disadvantages users point out are the tight angle rotation mechanism and the small volume of the included dust bag.

Specifications:

• Design type: tabletop;
• Cutting height/width: 65/305 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 57 m/s.

pros

• laser marker;
• backlight;
• long warranty;
• equipment;
• build quality.

Minuses

• noisy;
• small bag for shavings.

Metabo KGS 254 M

Powerful tool designed for household construction and carpentry work.

Equipped with a sufficient number of functions, which brings the saw closer to the semi-professional category.

The strength and reliability of the design is achieved due to the aluminum body, high-quality assembly and components . Despite the fact that saws are produced in China, quality checks are carried out in accordance with European standards.

High operating speed is achieved by the number of revolutions and engine power.

The ergonomics of the device is guaranteed by a bright laser pointer, LED illumination of the working area and general design characteristics.

There is a spindle lock for safe maintenance. A powerful dust collector with the ability to connect a vacuum cleaner will help keep the workplace clean.

Specifications:

• Design type: tabletop;
• Cutting height/width: 92/305 mm;
• Disc/bore diameter: 254/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 60 m/s.

pros

• laser pointer;
• equipment;
• power;
• cutting depth adjustment.

Minuses

• high price.

BOSCH GCM 800 SJ

One of the best saws in terms of price range and performance . Saw

household grade has wide functionality and can be used even in small carpentry workshops.

The advantage of the model is the design - the drive is equipped with double electrical insulation, allowing operation in rooms and conditions with high humidity.

Saw blades can be easily changed without much time.

The saw copes well with both hard and tough wood at different angles.

It is also equipped with a dust removal system, but users note its imperfection - dust and chips fly past and pollute the workspace.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/270 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 45/47 degrees;
• Cutting speed: 57 m/s.

pros

• double electrical insulation;
• performance.

Minuses

• poor equipment;
• imperfect removal of work debris.

BOSCH GCM 8 SJL

Semi-professional tools from a well-known German manufacturer are designed for processing parts with a small cross-section.

The saw is capable of working not only with wood, but also with metal and a variety of plastics.

The small diameter of the saw blade does not interfere with the speed and functionality of the tool.

Additional options that provide ease of use include a cutting depth limiter, work table extenders and a two-point dust removal system, which allows you to keep the work area clean and not be distracted by sweeping away chips and dust.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/312 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 62 m/s.

pros

• laser marker;
• groove cutting depth limiter;
• two-point removal of chips and dust;
• clamp for fixing the workpiece.

Minuses

• meager equipment.

Metabo KGS 305 M

A universal miter saw has high power and speed of operation, as well as a wide range of different functions, due to which it is classified as a semi-professional tool.

The wear-resistant saw blade does not require sharpening for a long time and is capable of working with various types of wood, plastic, and metal.

It can work both in stationary and manual mode, which sets the saw apart from other options.

Non-standard workpieces can be fixed using special clamps, and stability is increased by special side stops.

Ergonomics are represented by a bright laser marker, LED illumination of the working area, and a soft start system. The built-in dust collector is designed to accommodate a large volume of debris, and when a vacuum cleaner is connected, the ingress of debris onto the work surface is virtually eliminated.

Specifications:

• Design type: tabletop;
• Cutting height/width: 105/305 mm;
• Disc/bore diameter: 305/30 mm;
• Tilt/rotate angle: 47/47 degrees;
• Cutting speed: 60 m/s.

pros

• smooth start;
• backlight and laser pointer;
• side stops and clamps;
• stop for transverse and longitudinal grooves.

Minuses

• high noise level.

Rating of the best miter saws with broaching up to 10,000 rubles

Not everyone can purchase professional devices; miter saws are expensive. There are several very budget models in stores that still have good functionality.

Bison ZPT-210-1400 L

The miter saw for boards and beams with a diameter of up to 60 mm is distinguished by precise, neat cuts. Despite the low cost, the model is equipped with a laser, a clamp and a bag for collecting sawdust, and is equipped with protective locks.

You can buy a Zubr miter saw for 5,200 rubles

Caliber PTE-1400/210M

A simple but reliable Russian-made model is designed for cutting wooden products at the desired angle. The unit with a 1400 W motor is equipped with a vertical workpiece clamp, a dust collector and additional supports.

The average price of a Caliber saw starts from 5,300 rubles

Hammer STL 1200/210C

Inexpensive universal tool suitable for straight, bevel and bevel cuts in wood and plastic. Despite the low power of 1200 W, it develops 4500 revolutions and provides an even, precise cut.

A budget Hammer miter saw can be purchased from 7,400 rubles

BISON ZPT-255-1800 PL

Next in our TOP is a miter saw with a broach - ZUBR ZPT-255-1800 PL. This is a powerful tool with a movable head and laser illumination of the cutting line, which allows you to very accurately cut wood and plastic, and when using special discs, even thin-walled aluminum. The BISON saw is suitable for all types of sawing: straight, oblique, inclined and combined. Among the advantages of this model, it is worth noting the rather large sawing width due to the sliding disk head and the ability to install large-diameter disks. The maximum cutting depth for which this tool is designed is 90 millimeters, and the width is 305 millimeters. So such a saw will find wide application in various workshops and specialized workshops, not to mention use in private households. This unit is made of a special alloy, which is very durable, but at the same time lightweight. So the assembled saw weighs only 13 kilograms, which makes it much easier to move. Well, as for safety, this saw has extension table supports that prevent the sawn workpiece from tipping over, as well as an automatic closing guard that prevents injury and damage to the operator. Those who have already purchased such a saw speak extremely positively about it, noting its high power, cutting accuracy and reliability. By the way, the manufacturer gives a 5-year warranty on its power tools. So, if you need a powerful and durable miter saw, then this model is worth considering.

• Power: 1800 W.
• 5000 rpm
• Cut size 90⁰: 305x90 mm.
• Cut size 45⁰: 210x55 mm.
• Cable length: 2 m.
• Dimensions: 790 x 480 x 400 mm.
• Weight: 13 kg.

Rating of miter saws with broaching up to 15,000 rubles

Models costing up to 15,000 rubles are considered average in terms of budget. They are noticeably behind professional ones in terms of characteristics, but can already offer good performance.

Kraton MS-1900/254

Inexpensive cross-cutting tool with laser and broach has good assembly and fixes tilt and rotation without signs of play. The width of the cut is 310 mm. Among the shortcomings, we can only note the abrupt activation of the device and insufficiently high-quality dust removal.

The price of a Kraton miter saw is on average 12,000 rubles

Elitech PT 1825KU

A Russian-made saw allows cutting workpieces at an oblique angle of 45°. The device has a soft start and a laser pointer, and it is possible to install additional supports to extend the desktop.

You can buy an Elitech cross-cutting unit for 13,000 rubles

Bison ZPT-255-1800 PL

Another inexpensive saw for cutting plastic, wood and aluminum. The model is equipped with a dynamic brake and a laser pointer, making cuts 75 mm deep.

A Zubr miter saw with an 1800 W motor costs about 11,000 rubles

TOP 5 best inexpensive miter saws with broaching

BISON ZPT-255-1800 PL

A Russian-made miter saw that allows you to work not only with wood, but also with aluminum and plastic.

It has the functions of a circular saw and allows you to cut workpieces to length, for which it is equipped with a special work table located at a different level compared to the miter table.

The broach allows you to trim various workpieces with a width of more than 30 cm.

The speed of operation is achieved by power and a large number of revolutions.

The dust removal function is present, however, during operations, chips fly onto the guides; they must be removed regularly, which slows down the work.

Specifications:

• Design type: tabletop;
• Cutting height/width: 90/305 mm;
• Disc/bore diameter: 255/30 mm;
• Tilt/rotate angle: 45/47 degrees;
• Cutting speed: 55 m/s.

pros

• laser pointer;
• extension of the table in both directions;
• power;
• functions of a circular saw.

Minuses

• during operation, chips fly onto the guides;
• weak light from the laser pointer.

BLACK+DECKER BES700-QS

Classic table saw for household use . A special feature of the model is

the absence of a laser marker and the location of the backlight - it is such that it sets the cutting direction with the shadow of the disk itself.

This is partly a plus and a minus - the laser guide can go astray, while the natural shadow cannot be knocked down.

All modern functions are present - tilt angles, adjustment of cutting depth.

All supporting elements are made of cast parts, which ensures high reliability of the device.

Specifications:

• Design type: tabletop;
• Cutting height: 62 mm;
• Disc diameter: 216 mm;
• Tilt angle: 45 degrees;
• Cutting speed: 50 m/s.

pros

• the direction of the cut is set by the shadow;
• functionality;
• The disk is easy to replace.

Minuses

• no laser marker.

CALIBER PTE-1900/255PRm

An excellent tool for carpentry work . Equipped with a powerful commutator motor,

providing high rotation speed.

A laser marker and fold limiter increase the accuracy of work with workpieces.

A special feature of the model is that the saw can even work with firewood . The rich set of accessories is a pleasant bonus - the saw comes with a set of brushes, a clamp, and a dust bag.

The maximum cut here is small, but sufficient for most jobs . It will be an excellent help both for household needs and for a small carpentry workshop.

Specifications:

• Design type: tabletop;
• Cutting height/width: 72/300 mm;
• Disc/bore diameter: 255/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 55 m/s.

pros

• laser marker;
• equipment;
• powerful engine;
• assembly reliability.

Minuses

• no soft start.

BISON ZPT-210-1600 PL

Compact, single-speed tool for handling workpieces of various sizes.

Equipped with a table for fixing the device, the cutting head can easily be tilted to the right and left if necessary.

The sharp disc copes well with workpieces up to 60 mm thick.

The laser line will allow you to accurately guide the cutting elements.

Power parameters and cutting elements allow you to work not only with wood, but also with thin-walled metal and plastic materials.

The output does not chip and is easy to install and transport. Compared to most models, it has a fairly low noise level.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/220 mm;
• Disc/bore diameter: 210/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 60 m/s.

pros

• laser marker;
• ease of installation and transportation;
• power;
• cut quality.

Minuses

• Slowly removes dust and sawdust.

Einhel TC-SM 2131 Dual

A compact and fairly lightweight miter saw is ideal for cutting fence boards, timber, and working with facing materials.

Optimal for rough work without perfectly precise dimensions. Equipped with a good motor that produces high torque speed.

Accuracy is ensured by a laser marker, but during operation it can become clogged with dust, which is why it needs to be wiped from time to time.

The dust collector included in the kit copes well with large debris, but fine dust easily scatters, contaminating the work surface; for cleanliness, it is recommended to connect a vacuum cleaner.

Specifications:

• Design type: tabletop;
• Cutting height/width: 62/310 mm;
• Disc/bore diameter: 210/30 mm;
• Tilt/rotate angle: 45/45 degrees;
• Cutting speed: 60 m/s.

pros

• laser marker;
• easy to configure and install;
• optimal height and width of cut;
• easy to maintain.

Minuses

• the laser marker becomes clogged with dust;
• Suitable for rough work.

Top 5 best no-broach miter saws

Trimming devices that are not equipped with a broach are less functional. But they are more compact, and their price is usually lower.

Einhell TH-MS 2112

The unit for cutting workpieces at an angle of 45 ° shows a power of 1600 W. It is equipped with a 210 mm disc with a maximum cutting width of 120 mm and makes 5000 revolutions per minute. Equipped with a protective cover and dust collector.

You can buy a saw without Einhell broach for 5,800 rubles

Bosch GTM 12

An expensive universal saw is not equipped with a broach, but it offers many other valuable features. In particular, the model can be used as a circular tool with a cutting depth of 51 mm. When making an end cut, the disc plunges up to 95 mm and 150 mm in width. The model supports 48° rotation and 47° left tilt.

The cost of the Bosch GTM 12 miter saw is from 47,000 rubles

Makita LH1201FL

A good end saw with saw table is equipped with a 1650 W motor and 305 mm discs. Makes a 95 mm cut with a width of 155 mm.

The cost of a miter saw without broaching Makita is 35,000 rubles

DeWalt DW714

One of the best miter saws for installing doors with a 1650 W motor and a 254 mm blade. It has smooth adjustment of rotation and tilt in both directions. Among the advantages are a fairly smooth start of the unit and an electrodynamic brake.

You can buy DeWalt DW713 for 16,000 rubles

Metabo KS 216 M Lasercut

The inexpensive saw is not equipped with a broach and provides a cut of up to 60 mm. The rpm is 5000 per minute, the unit has an average power of 1350 W. There is a laser pointer, and it hardly gets clogged with dust during operation.

You can buy a Metabo Lasercut for an average of 8,000 rubles

TOP 5 best professional miter saws with broaching

BOSCH GCM 12 GDL

Stationary saw with high power and torque speed . Has high

productivity, easily copes with large volumes of sawing work.

Capable of processing any type of wood, metal, and plastic without much effort.

Reliable fixation of workpieces is ensured by thrust profiles and a clamp . Long workpieces will allow you to process telescopic supports.

Adjusting and setting up the saw is very simple thanks to clear controls and accessible instructions..

Wide functionality allows you to use the saw not only in domestic conditions, but also in small workshops.

Specifications:

• Design type: tabletop;
• Cutting height/width: 104/341 mm;
• Disc/bore diameter: 305/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 60 m/s.

pros

• clean cut;
• power;
• reasonable cost;
• telescopic supports for long workpieces.

Minuses

• meager equipment.

BOSCH GCM 8 SDE

Professional tool for longitudinal and cross cutting of wood blanks.

A powerful engine and high-quality sharpening of the saw blade allow you to process any type of wood.

The saw blade tilts easily, there are precise protractors for setting the angle.

The lower saw guard is automatically removed, providing greater operator safety.

Sawdust is collected using a plug-in vacuum cleaner . Ergonomics are ensured by a comfortable pistol-shaped handle; the trigger button is wide and can be pressed with several fingers at once.

Specifications:

• Design type: tabletop;
• Cutting height/width: 70/312 mm;
• Disc/bore diameter: 216/30 mm;
• Tilt/rotate angle: 60/47 degrees;
• Cutting speed: 55 m/s.

pros

• laser pointer;
• equipment;
• power;
• cutting depth adjustment.

Minuses

• poor equipment;
• no dust collector.

Metabo KGS 315 Plus

One of the best miter saws with broaching . Design features allow smooth

adjust the number of revolutions, and in combination with a sharp cutting element and high power, the tool can process various materials, including metal.

Much attention has been paid to the quality of the dust collector - a two-point vacuum system guarantees a minimum amount of dust and shavings in the workplace.

By connecting two vacuum cleaners, debris during cutting is virtually eliminated.

It is not suitable for professional use due to the low accuracy of scale markings.

Specifications:

• Design type: tabletop;
• Cutting height/width: 120/320 mm;
• Disc/bore diameter: 315/30 mm;
• Tilt/rotate angle: 47/60 degrees;
• Cutting speed: 67 m/s.

pros

• laser marker;
• smooth speed control;
• performance.

Minuses

• low accuracy of scale markings.

Makita LS1219L

A high-power table saw is a semi-professional tool.

The peculiarity of the model is the ability to set the side of the laser marker - it can go either on the right or on the left side of the disk.

The broach is implemented in such a way that the guides are pushed forward, so that nothing moves back, which allows you to place it almost flush against the wall.

There are table extenders that allow you to work with non-standard workpieces.

Rotation can be carried out both with and without angle fixation . It is possible to fix the saw for transportation.

Specifications:

• Design type: tabletop;
• Cutting height/width: 107/363 mm;
• Disc/bore diameter: 305/25.4 mm;
• Tilt/rotate angle: 48/60 degrees;
• Cutting speed: 69 m/s.

pros

• laser pointer on both sides of the disk;
• broach fixation;
• power;
• smooth start.

Minuses

• non-standard diameter of the mounting hole;
• price.

Metabo KGS 254 I Plus

One of the best and newest models of miter saws . The main advantage is asynchronous

drive, powerful motor and improved ergonomics.

The first allows you to convert electrical energy into mechanical energy, due to which a low noise level is achieved during operation, and the mechanism itself lasts much longer.

Equipped with a cutting depth adjustment, a bright laser pointer and a precise scale.

The cleanliness of the workplace will be ensured by a dust collector with a two-point intake, thanks to which the spread of dust outside the working area and its direct contamination will be minimized.

Durable stops will not allow you to move even under heavy loads and when working with hard wood.

Specifications:

• Construction type: manual;
• Cutting height/width: 90/305 mm;
• Disc/bore diameter: 254/30 mm;
• Tilt/rotate angle: 46/47 degrees;
• Cutting speed: 62 m/s.

pros

• accurate scale;
• ergonomics;
• engine power;
• strong stops.

Minuses

• heavy.

Choosing a miter saw. Answers to the most important questions

Modern crosscut saws allow you to make combined cuts. The saw blade of the tool can be rotated not only to the right or left to cut the workpiece at the desired angle in the horizontal plane, but also tilted to one or both sides, thereby providing a vertical cut. The horizontal and vertical cutting capabilities of modern miter saws are different, so let’s briefly talk about what you should pay attention to when choosing a saw based on these parameters.

• One-way and two-way tilt

The miter saw unit can tilt in one or both directions. In terms of functionality, both options are the same: with single-sided models you can perform the same sawing operations as with double-sided models. But in matters of convenience, the latter unconditionally win.

To cut each end of the board on a single-sided saw, the workpiece must be removed from the bed, turned over and re-fixed. Such juggling becomes a separate challenge when you have to work with long and heavy workpieces in large volumes. Tilt in both directions - saves time and effort.

• Max depth of cut at an angle of 45°

In modern models this figure varies from 25 to 122 mm .

At an angle, the miter cut does not cut as deeply as in the 90° position. Machines with a shallow corner cut depth are an option for those who plan to work with lining, laminate and other thin materials. For all other cases, it is important to prudently compare this parameter with what will primarily have to be cut. This will avoid the most common disappointment when it turns out that the tool is not able to cope with facing thick workpieces at an angle.

It is also important to remember that miter sawing creates greater loads on the tool - the higher the power, the better the quality of the cut the trim provides.

• Max depth of cut at an angle of 90°

For non-industrial miter saws, this figure ranges from 45 to 122 mm. Placing the saw assembly perpendicular to the workpiece surface is the most common configuration in which most sawing operations are performed. Therefore, special attention should be paid to choosing a machine for this parameter. The greater the depth of the straight cut, the higher the class of equipment.

• Max cutting width at an angle of 90°

A parameter that reflects the maximum width of the workpiece that can be cut by the miter saw at a right angle. In modern household and professional saws this figure varies from 85 to 430 mm. In general, this is one of the key indicators that determine the productivity of the machine. It is important not to forget that the cutting width at 45° will be significantly smaller than at a right angle.