Useful tips on how to properly use an Electrolux washing machine

Main

Remember that it is strictly not recommended to select a washing mode at random; it is always better to carefully study all the symbols on the panel and their meanings. There is a huge plus for Electrolux users - the symbols are the same for all models. Here are instructions for the main modes.

1. The icon depicting a container with a Roman numeral I indicates “Pre-wash mode”. It is used for heavily soiled laundry. The symbol is also printed on the dispenser tray so that the operator does not confuse the detergent compartments. This program increases the washing time by 20%.
2. The icon depicting a container with a Roman numeral II - this is the “Main wash” mode - is completely standard. The time depends on the temperature and type of fabric.
3. A container with bubbling water indicates the “Rinse” mode. This program is used as an additional one if the laundry, as it seems to you, was not rinsed well before. Takes up to 20 minutes.
4. The spiral icon is “Spin”. This program is designed to additionally spin laundry by adjusting the speed of rotation. This will take up to 5 minutes.
5. The window with the number 24 inside means “Wash Delay”. After loading the laundry into the drum, you can select the time after which the machine will start working. The maximum is 24, but depends on the model.
6. The container with the arrow pointing down is the “Drain” icon. Turn on this mode if the machine does not drain the water after washing.
7. A horizontal arrow indicates that the program has ended.

The panels of Electrolux washing machines are equipped with additional indicators that show the end time of the program and the operation of any of the functions. After finishing the wash, you will hear a characteristic sound signal.

Take your first launch seriously

Immediately loading laundry into a newly purchased washing machine would be a bad idea. Before using the equipment as usual, it is necessary to prepare it, install it, connect it to communications, wash it and configure it. The first step will be installation with leveling and unscrewing the transport bolts. The latter protect the tank during transportation, but before starting the first wash they must be removed from the body.

The second step is to connect the equipment to communications: power supply, water supply and sewerage. It is important to check the quality of the connections - everything should be as tight and safe as possible.

The third point is technical launch. This means turning on the idle cycle to cleanse the washer of factory grease and the characteristic “chemical” aroma. It is important that the first wash is done without laundry, but with detergent. We proceed like this:

1. check that the drum is empty;
2. pour the powder into the largest compartment of the detergent tray;
3. plug the machine into the socket;
4. turn the selector to any long-term high-temperature mode ("Cotton", "60" or "90" will do);
5. click “Start”.

The first time the washing machine starts “idle” - with an empty drum, but with detergent.

If the machine does not respond to the command, then it is worth checking whether the hatch is tightly closed. There may also be other problems caused by poor connection or manufacturing defects. This is the main task of the first cycle - to evaluate the performance of Electrolux. If there is noise, knocking, leaks, increased vibration or other suspicious “symptoms,” we call a repairman. Remember that in this case free warranty service will apply.

Auxiliary

To care for certain types of fabrics, auxiliary modes have been invented. It is worth noting that auxiliary modes may vary for different brand models. Below are instructions for use.

1. The “Cotton” mode is indicated by a symbol with a cotton boll. Accordingly, it is designed for washing cotton fabrics. Washing duration is 145 minutes at 90 degrees.
2. Cotton box + eco inscription – mode for washing white and non-fading colored laundry. Washing time – 136 minutes, temperature – 40-60 degrees.
3. A triangle with an open edge is the icon for the “Washing synthetics” mode. The program washes synthetic and mixed items without heavy soiling. You can adjust the temperature from cold to 60 degrees, the washing time is one and a half hours.
4. The chamomile symbol is the “Delicate Fabrics” program, with its help you can delicately remove dirt from delicate fabrics in an hour at a temperature of 40 degrees.
5. Ball + basin - this is the “Wool or hand wash” mode. You should choose it if you want to wash hand-washable wool items. Temperature – 40 degrees. The process will take 55-56 minutes.
6. The symbol with a butterfly is the “Silk” program, for washing mixed synthetics and silk at a temperature of 30 degrees. It takes 40 minutes.
7. The icon with a blanket indicates the “Blanket” mode. When using this program, the contents of the blanket do not become loose. Washable for 100 minutes at 30-60 degrees.
8. The pants icon symbolizes the Jeans program. This program can be used to wash wool, denim and dark fabrics. The operator adjusts the temperature from low to 60 degrees. The program lasts up to 100 minutes.
9. The symbol with tulle indicates the “Curtains” mode. With it you can wash any curtains at 40 degrees. It would be better to pre-wash without using detergent. The program erases up to 100 minutes.
10. Ked is a “Sport” mode designed for washing sports shoes or synthetic fabrics. Good for “refreshing” old things. It takes half an hour.
11. The shirt icon represents the Five Shirts mode. The machine washes five shirts in one go in half an hour.

With prolonged use, you can easily remember all the symbols and operate your machine with even greater benefit.

Washing machine installation

Unpack the electrical device and unscrew the shipping bolts. Their location is at the rear of the machine. Plastic plugs must be inserted into the resulting holes.

Now you can install the machine on a hard surface (no need to put anything under the device). Next, you need to adjust the legs so that the machine stands stable; to do this, you need to unscrew them to fix the desired height.

Functional set

This washing machine has a number of useful functions. Please note that some of them are activated automatically, while others will have to be configured by you personally. But before you start using it, carefully study the purpose of this or that option:

• “Steam system” - will treat your laundry using steam without wrinkling it;
• “Panel lock” will protect the buttons from accidental pressing, as well as from children;
• "Direct Spray" sprays clothes with water to prevent wrinkles;
• “Aqua Control” allows you to protect your car from leaks;
• “Time manager” allows you to choose your own washing parameters.

As you can see, the Electrolux car provides many features that will make your life much easier if you understand how to use them.

Running a normal program

After the technical launch, Electrolux is ready to operate normally. Now you can start washing your laundry, the main thing is to select the appropriate program, setting the system in the desired way. You should focus on the color and type of fabric, as well as the presence of stains and the time available for cleaning.

If this is the first time the machine has appeared in the house, then the abundance of icons and buttons on the machine’s dashboard can confuse and even frighten. But you shouldn’t be afraid – you can understand the functionality of the equipment in one read of the instructions. It deciphers all the images and describes in detail the available modes and options.

Before starting the washing machine, read the factory instructions - it describes the operating rules of the equipment, as well as the available modes, functions and powers.

Having dealt with the buttons, we proceed to turn on the cycle. The instructions are as follows:

1. insert the power cord plug into the socket;
2. open the water supply to the machine;
3. fill the drum with things, observing the loading norm;
4. close the hatch until it clicks;
5. open the powder receptacle;
6. add detergent, powder, gel, softener, rinse aid;
7. press the system power button;
8. use the selector to select the desired position;
9. start the wash with the “Start” button.

Modern Electrolux will indicate the end of the cycle with a sound signal. But immediately after the melody it is useless to try to open the hatch - the electronic door lock is removed 2-3 minutes after the “finish”.

It is not recommended to wash all items using one mode. For high-quality and gentle washing, it is important to choose the right program for the color and type of fabric: cotton, wool and silk products require different conditions, spin and temperature. Failure to follow the rules will affect the quality of the clothes - they will deteriorate, become discolored or deformed.

Starting the wash

First of all, put the laundry in the drum, carefully distributing it. To avoid further problems, never cram laundry into the machine or overload it. Also, do not wash white items mixed with colored items, as this may damage them. Before starting, make sure the hatch is tightly closed!

The corresponding program is set by turning the selector, other parameters by pressing the keys. The spin speed can be seen on a special panel, as well as the time. Having selected the program, you can start the machine.

Tips for car owners

Read the instructions thoroughly before using the unit. To avoid unexpected situations when washing, try not to break simple rules. Firstly, if the water supply hose comes off, turn off the power immediately! Secondly, do not wash materials for which the device is not intended, also:

• turn off the tap if you are not using the washing machine;
• To avoid deformation of the rubber seal, do not wash items stained with oily substances;
• Wipe the drum and walls with a damp cloth when the power is off, otherwise the parts may become unusable;
• If the water supply is stopped, open the tap slowly and carefully the next time you wash; do not jam the laundry in the drum with the hatch door;
• Make sure that there are no foreign objects in your clothing pockets, this could damage the car;
• to avoid damage to the heating element, soften the water with Calgon or other additives;
• The drain pump filter needs regular cleaning.

The Electrolux washing machine is easy to use and will not cause problems if you follow these simple rules. All you need is to carefully study the instructions and be extremely careful, not forgetting, first of all, about your safety!

Interesting:

• Marking of Electrolux washing machines
• Symbols on the Bosch washing machine
• Symbols on the dishwasher
• Designations on a Samsung washing machine
• Decoding the markings of Bosch washing machines
• Symbols on the Electrolux dishwasher

Reader comments

• Share your opinion - leave a comment

Review of popular models

Despite some shortcomings, the demand for Electrolux top-loading washing machines is quite high. When choosing equipment, pay attention to the presence of an inverter motor - it allows the washing machine to operate with less noise and consume electricity economically.

Each of the vertical models has strengths and weaknesses. Let's look at some of them in terms of their main characteristics.

Reviews of Electrolux top-loading washing machines will help you choose a home assistant among several similar models

Electrolux EWT1062TDW

The washing machine is designed to load 6 kg of dry laundry and contains 16 washing programs. The main positive aspects of the model:

• the ability to install child protection and delayed start;
• AutoSense function – individual selection of washing parameters depending on the number of loaded items;
• low noise level during washing due to the leveling of the legs;
• the ability to make changes to the programmed standard mode.

The disadvantages of the model include susceptibility to voltage surges and the long duration of the short washing cycle, which is more than an hour. The washing machine is not equipped with a timer to control the washing time.

Electrolux EWT1377VOW

The model allows you to load 7 kg of dry laundry into the drum. The main advantages of this washing machine:

• convenient control panel;
• removable powder tray;
• fast spin (1300 rpm);
• inverter motor;
• SteamSystem function – processing laundry using steam;
• The minimum duration of a short wash is 14 minutes.

Additional bonuses include drum lighting and lid opening at the touch of a button. The main disadvantage of the machine is its overprice. The work noted such disadvantages as strong noise and vibration when spinning at maximum speed, and the absence of wheels.

Electrolux EWT51066ESW

A popular top-loading model among users. Consumers note the following strengths of the unit:

• drum parking function;
• removable powder compartment;
• presence of a timer to adjust the washing time;
• minimum energy consumption.

The machine washes clothes in any mode with a slight whistle, and the noise during spinning at high speed can cause a feeling of discomfort in the user.

Electrolux EWT 0862 TDW

The compact washing machine, 40 cm wide, is designed to load up to 6 kg of laundry. Unlike other vertical models, the powder compartment in it is not on the top cover, but above the drum. Main advantages of the unit:

• protection against leaks;
• presence of LED display;
• 15 washing programs;
• economical water consumption – 49 l/cycle.

Weaknesses of this model: low spin speed (up to 800 rpm and high noise level during washing.

Below we present to your attention a table containing the characteristics of several popular models.

As can be seen from the review, Electrolux top-loading washing machines have more positive qualities than disadvantages, which sets them apart from the products of competing companies.

Features and main advantages of the Electrolux washing machine

1. Direct Spray technology. The technological process ensures constant impregnation of the laundry with a stream of detergent. The jet is formed under the action of a mechanism that creates pressure and is directed directly at the things loaded into the tank. This treatment leads to foam penetration deep into the structure of the linen, and preserves the fabric fibers from damage. The quality of washing is controlled by a microprocessor of the amount of water. This is important because if there is excess water in the tank, the friction between things is weakened and the quality of the wash decreases. If the quantity is small, the laundry is not sufficiently wetted with detergents.
2. Eco-Valve technology. It is designed to control the consumption of detergents and water. This makes it possible to significantly save consumable resources. This technology prevents washing powder from accumulating in the water drain hose. In addition, it prevents the process of mixing clean water with its residues from the previous rinse.
3. Fuzzy Control technology. It is designed to control the foaming process in the “Rinse” and “Spin” modes. The program regulates the process time depending on the intensity of foam removal;
4. The automatic balancing function “Fuzzy Control” has been improved. This mode allows you to eliminate imbalances in the spin cycle in case of clumps in the washed clothes without user intervention. The important fact is that if it is not possible to untangle the lump, then the operating mode goes into the region of reduced speed;
5. added “Hand Wash” function. This allows you to use the washing machine even for processing items that can only be washed by hand. This mode is based on the principle of “swing” technology. First, the drum makes half a revolution in one direction, then a minute pause and only after that it rotates in the opposite direction. Slow rotation of the drum and long pauses do not damage delicate items;
6. Added Rinse Stop mode. It is used when it is not advisable to drain the water after completing the rinsing process. In this case, the laundry can temporarily remain in the machine;
7. added automatic water cooling function. It prevents the occurrence of a “temperature shock” effect in sewer pipes when hot drain water enters them. This often leads to their premature wear.

Useful functions of the Electrolux washing machine

In addition to the main and additional modes, the Electrolux washing machine is equipped with many additional functions that ensure the most comfortable, safe and efficient operation of the household appliance. Useful options:

1. The Steam System steam treatment function allows you to quickly refresh your laundry without using washing powder and helps get rid of folds and creases in the fabric.
2. The AutoSens system helps save water and energy. The washing machine automatically determines the optimal washing time, electricity and water consumption based on the weight of dirty laundry loaded into the drum.
3. The Aqua Control system will help you forget about washing machine leaks forever. If the tank becomes depressurized during the washing process, a special float sensor will send an alarm signal to the control module. As a result, the washing machine will automatically block the water supply (cut off the inlet hose) and start the drain pump.
4. The Time manager function helps you adjust the wash duration. Simply press the appropriate button on the control panel and select the appropriate working cycle duration based on the options offered by the program.
5. Direct Spray mode is qualitatively different from conventional modes. During the washing process, things are not simply immersed in water, but are constantly sprayed with a soap solution that enters the drum of the washing machine under pressure. This ensures gentle but very effective cleaning of dirty laundry at the same time.
6. The AVTO DOSE function will automatically supply the adjusted amount of detergent into the powder receptacle. The machine weighs the laundry loaded into the drum and determines the exact amount of washing powder.
7. Child locking will help protect equipment from constant repairs (child's pranks can lead to serious damage). To turn on the lock, you need to press and hold for several seconds the two keys “Prewash” and “Easy Ironing”.

Depending on the washing machine model, the combination for activating the child lock may differ. The necessary information can be found in the operating instructions for the household appliance.

Checking readiness

The next step is a series of procedures designed to make sure that all connections are made correctly and the machine can be used for its intended purpose.

Check list:

1. Check that all transport bolts have been removed. This is important, since during operation the washing machine will vibrate, and these elements will damage the floor covering, nearby surfaces and some parts of the unit itself.
2. Read the instructions. After all, working with different models is different. New generation machines have “intelligence” (for example, Bosch, Samsung, Electrolux), and an illiterate approach can turn into a disaster in the form of a breakdown or a banal failure - you won’t even be able to start the wash. By neglecting this rule, you can damage the device with even basic actions.
3. Make sure that all water supply and drainage hoses are connected to the appropriate communication pipes. It often happens that the location of the machine will still change, or it is located far from the sewer. In this case, the corrugated tube is hung on the edge of a sink, bathtub or other container with a drain.
4. When the water supply tap is located near the junction of the water supply with the rubber hose of the machine, and it was closed when connecting, it needs to be opened.
5. Look into the drum and check for foreign objects.

To avoid problems during further use, after completing all the steps, you need to carry out the starting start correctly.

Important: such preparation is relevant for a unit of any brand, be it ARDO, Ariston, Atlant, Beko or LG.