How to reset a Bosch dishwasher program?

Resetting the program in Bosch dishwashers

Sooner and later, any equipment fails, but the reasons can be completely different. Bosch dishwashers are no exception. Despite the high build quality and innovative technologies, German technology also sometimes refuses to work fully, but thanks to the built-in diagnostic system, the user can promptly identify and solve the problem. As a rule, any minor repairs and reprogramming of a household appliance are accompanied by resetting all settings, and the further functionality of the dishwasher depends on how correctly it is performed.

When is a reset necessary?

Malfunctions of the dishwasher can lead to it not washing or rinsing dishes properly, increasing resource consumption, and changing the cycle time.

In addition, this can lead to complete breakdown of the unit, when professional repairs and replacement of expensive parts cannot be avoided.

You can prevent this outcome by resetting your household appliance yourself, which is done in two ways.

Completely disconnect the dishwasher from power supply for 20 minutes. This time is sufficient to restart the electronic module of the device.

Press and hold the “Start/Power” button for 10-20 seconds. This is also enough to reset and reboot the device.

However, such an algorithm of actions is appropriate if the cause is clearly defined and the error is deciphered, which is displayed on the machine display. Otherwise, you will need to reset the settings to factory settings.

As practice shows, the list of the most common reasons for failure to fully operate the device includes:

electronics module failure;

stopping and crashing the current program;

clogged filters and hoses;

incorrect position of the water supply and drain hose;

lack of water supply in the system;

All of the above problems can be easily fixed by restarting, however, there are problems that require more serious manipulations. These include:

pump failure;

automatic activation of protective programs, for example, AquaStop, which signals possible leaks in the dishwasher.

If resetting the settings and restarting the unit does not restore the full functionality of the dishwasher, then professional diagnostics and specialist assistance will be required.

Causes of breakdowns

Even such reliable equipment as Bosch can fail for completely banal, everyday reasons, for example, due to loading excessively dirty dishes into the washing chamber.
Residues of food washed away by the flow of water will clog the filter and cause clogging. To avoid this situation, it is better to first clean the food left on the plates before placing them in the machine.

An incorrect connection to the electrical network and a faulty socket have a bad effect on the dishwasher. A drain hose that is too long or poorly secured in the water supply area can also create problems, so installation and installation should be entrusted to professionals.

If the home master wants to do this himself, he must strictly follow the instructions and strictly comply with the requirements prescribed by the manufacturer in the passport attached to the unit.

A lot of inconveniences, and subsequently problems, are caused by improper loading of dishes into the washing chamber. Many users do not pay attention to this point and then encounter various problems.

Before loading plates, cups and cutlery, you must carefully study the instructions and take into account all the wishes put forward by the manufacturer of the equipment.

Dishes placed correctly will be perfectly washed and will not require any additional action from the housewife. In this case, the machine will not feel overload and will serve well throughout the entire operational period.

If your device is more than five years old, then most likely some part has simply failed. Diagnostics and replacement of the damaged part will help to quickly resolve the problem. If you have recently updated your equipment, then the reasons for the dishwasher breakdown may be hidden in the following:

1. Cheap assembly or low-quality parts. As a rule, this occurs in models with a suspiciously low cost. If you are the owner of a Bosch, Indesin, Electrolux or Ariston car, then most likely this is not the cause of the breakdown.
2. Presence of food remains. Only dishes containing very small particles of food are allowed to be loaded into the machine. If this is not observed, the filters will become clogged, which will cause possible breakdown.
3. No power. A common cause of equipment not working is a faulty socket.
4. Poor quality detergents. As a rule, brands such as Bosch, Indesit and Ariston recommend certain detergents that do not harm the car. If you purchase a cheaper option, you will have to spend money on equipment repairs.
5. Incorrect operation. This may include general issues - the door not closing tightly, improper placement of dishes, loading items that are prohibited from being washed in the dishwasher, etc.

These are all the reasons, but what do the main breakdowns of dishwashers look like?

How to reset?

To correctly reset the settings to factory settings and get rid of all the accumulated errors on the dishwasher display, it is enough to carry out a series of manipulations, strictly adhering to the order. So, the program reset algorithm in Bosch dishwashers includes:

opening the car door;

pressing the start key;

simultaneous activation and holding of the buttons responsible for launching programs 1 and 3;

closing and reopening the door;

pressing and holding the Reset button for 5 seconds;

closing the door and waiting for the washing cycle to complete – the end is indicated by a glowing indicator;

opening the door and completely disconnecting the device from the power supply.

All of the above manipulations will allow the dishwasher to reboot and delete all error codes from memory, that is, return to the factory settings.

Recommendations

Compliance with basic preventive measures can prevent malfunctions and malfunctions in the dishwasher.

Regular temperature control of the water that enters the machine. For Bosch dishwashers, this figure is within 50-60 degrees.

Continuous cleaning of filters and rocker arms that spray water, as well as sewer and water hoses.

Control of all detergents that must be added in the quantities provided by the device. In addition, do not neglect the use of additional care products for the device.

Use the unit strictly according to the attached instructions. This also includes loading dishes correctly.

Selecting suitable detergents that match the programs and options of the machine. An incorrectly chosen product can negatively affect the quality of washing and can also lead to damage to the dishwasher. You should be especially careful when choosing 3-in-1 or 5-in-1 tablets, since not every dishwasher is designed to use this type of detergent.

Correct electrical connection. The safest way is to connect through a voltage stabilizer, which will protect against surges and other failures in the electrical network, which are often the cause of breakdowns of household appliances.

​​​​​In addition, do not forget that after each use of the machine it is necessary to ventilate it, leaving the door open for 20-30 minutes. This will prevent the appearance of unpleasant odors inside the bunker, and will also protect against the formation of microbes and corrosive processes.

Source

Maintenance

The duration of any mechanism depends on the quality of service. It is also necessary to monitor the condition of individual devices of the Bosch dishwasher:

• Detect scale and grease on the rocker arms: if they are detected, run the cycle without loading, with detergent, in intensive mode.
• Check the condition of the filters after each wash. If necessary, rinse them with hot water from the tap, otherwise the drain pump will be blocked from contamination and the dishwasher will need to be repaired.
• Wash the sprinklers from scale and food so that the quality of washing does not deteriorate. These devices are removable. Running hot water is suitable for cleaning.

A more detailed description of the care of parts of Bosch washing units can be found in the instructions for use included with the specific product. Following the instructions in the manual will allow you to use the dishwasher for a long time.

Source

The main advantages of the Bosch brand

When choosing a dishwasher, many buyers focus on the brand and build quality. Bosch units rightfully occupy first place among all models. This company from Germany receives a lot of positive reviews about its equipment. There are several advantages of the brand:

The cost of Bosch technical devices is quite reasonable and, combined with quality, is attractive to many consumers.

It is these advantages that make Bosch dishwashers the most popular among buyers.

Basic error codes and ways to solve them

You need to remember that, despite the high-quality assembly and reliability, a dishwasher is a technical device, so the possibility of breakdowns cannot be ruled out. Depending on the type of error, you may be able to resolve it yourself or you will have to contact a service center specialist. There are several groups of faults that appear with certain signs on the display.

Heat

A problem with water heating in your dishwasher shows several signs. Each of them has certain features.

E2 (F2)

The E2 (sometimes F2) icon appears on the display when the internal water temperature sensor is not working properly. In this case, the heater works well, but information about the increase in water degrees does not reach the control unit. If such an error is not corrected, then after some time the heating element may burn out.

E09 (F09)

Error E09 occurs when the flow heater is not working well. More often it appears in dishwashers, where the heating element is installed in the depths of the circular pump. To identify the problem, it is recommended to conduct a thorough inspection of the unit. If the multimeter shows zero resistance, then the heater will need to be replaced.

E11 (F11)

Indicator E11 indicates nutritional problems. Occurs when there is a breakdown in communication between the control module and the temperature sensor. Various reasons can provoke this phenomenon. It is necessary to diagnose the contacts, wiring of the temperature sensor and the control module. Before carrying out repairs, the machine is disconnected from the electrical network.

Preventive measures

To avoid getting into unpleasant situations, when disconnecting, you should remember several rules:

1. Before repairing the machine or turning it off, be sure to disconnect it from the electrical network.
2. Dismantling the hoses must be done with the valves closed, otherwise during work you risk getting under a strong stream of water.
3. Before disconnecting the device, you must make sure that there is no liquid left in it. To do this, you can turn on the drain and lower the hose into a shallow container so that all the water flows out of it.
4. In some cases, to seal the hole through which liquid entered the machine, it is necessary to purchase special steel elements to cover the pipes.
5. Even if the water is turned off, it is necessary to ensure the tightness of the hole from which the liquid was supplied.

In order to disconnect the device quickly and without any problems, it is enough to first imagine this process step by step in order to know exactly what is required during the work.

It is necessary to turn off the dishwasher in the following cases:

1. After the washing process, a large amount of water remains inside the device. In this case, you need to turn off the machine very carefully so as not to flood the entire room when disconnecting the hose.
2. Dirt is not completely washed off the dishes. If it is a blockage, then you cannot do without turning off the machine and thoroughly inspecting it.
3. There is an increase in electricity consumption. This means that it is necessary to check the heating element for serviceability, for which you will also have to turn off the device and disassemble it.
4. There is a continuous transfusion of water, which may indicate the need to replace the level sensors.
5. The dishwasher won't turn on. Such a malfunction is a sign of a breakdown of either the button or the surge protector.

1. Water begins to appear under the device. This unpleasant situation occurs if there is a hole in the hoses or the water collection hopper is faulty. If such signs are detected, you should turn off the device and inspect it.

Aware means armed; Accordingly, knowledge of ways to prevent malfunctions in the dishwasher will help prevent their occurrence and protect the owners of the equipment from force majeure in the form of a flood or the purchase of a new unit. The main and simplest measures to prevent damage to equipment include the following list.

1. Control the temperature of the water that enters the machine. For most manufacturers of household appliances, this level is kept within 50°-60°C.
2. Controlling the amount of rinsing solution. Its quantity must always correspond to the norm specified in the instruction manual.
3. Systematic cleaning of all filters.
4. Mandatory compliance with all requirements and standards of the operating instructions, including compliance with the principles of arranging dishes.
5. It is mandatory to use a surge protector when connecting the device to the electrical network in order to avoid the negative impact of possible voltage surges.

The amount of dishwashing solution must always correspond to the amount specified in the instruction manual

The last piece of advice stands out somewhat from this list, but is very useful in everyday life. Opening the door for 15 minutes after unloading will help avoid unpleasant odors from the dishwasher. This way, the internal surfaces of the unit will be able to dry completely without creating soil for the proliferation of microbes and bacteria.

We suggest you familiarize yourself with How to properly load dishes into the dishwasher

If all preventive measures are observed, as well as carefully following the operating instructions for the dishwasher, it will serve its owners for many years and will happily take on all the work of dealing with dirty dishes in their home.

How to reset errors

Errors in the operation of a Bosch dishwasher often cause panic among consumers. However, there are several ways to eliminate them.

First way

The first method involves disconnecting the unit from the electrical network. It is recommended to leave the device in this state for 20 minutes and then try to turn it on. As a rule, after such an action, the control module restores operation and the errors disappear.

Second way

The second method of resetting errors is simpler - you need to press and hold the “Power” button for 15 seconds. This action resets the settings to factory level. As a result, the functionality of the dishwasher is restored.

Errors in Bosch and Siemens dishwashers

Sometimes situations arise when the question arises of how to reset the program on a Bosch dishwasher or another model. Cancellation is simple - just press the Start button and hold it for 3 seconds. The indicator lights should go out. After turning off the dishwasher, it will begin draining water. This happens within about 1 minute. But it happens that there is a problem with the dishwasher. Error codes start flashing on the display. In this case, you also need to know how to reset the settings.

Typical faults

If the machine gives an error, then there is probably one of the following typical situations:

The washing program is stuck

While the dishwasher is operating, various errors may appear. Experts say the most common problem is that the washing program freezes. Which is why you need to switch the program, that is, reboot it. Many errors have codes, the decoding of which can be easily found in the instruction manual. Brief data is displayed directly on the display.

The control module program describes system failures. This allows the machine to perform self-diagnosis and alert you to various problems. Often the error does not disappear even if the device is turned off/on or rebooted. In this case, there is no choice but to determine the cause and eliminate it completely.

Program freezing is caused by a number of reasons. But often this happens because the user does not perform periodic cleansing and prevention . As a result, the filters become clogged, the sensors are triggered and the control module blocks the functioning of the device components. Once the blockage is cleared, everything returns to normal.

Sometimes during work several errors of different types accumulate. They do not interfere with washing and are not considered serious. But after some time, the dishwasher may malfunction or not start and stop switching programs. And this is dangerous because more serious breakdowns will appear in the future.

There is an overflow of water

If the PMM overflows water, this may indicate:

Sensor operation

Before you figure out how to cancel the program in the Bosch Silence Plus, SMV D RU, SMV EX R, SP, Supersilence dishwasher, as well as Electrolux ESL LO, Siemens, you need to study the operation of the sensors. Sometimes there is a malfunction in their work.

Let's look at the error codes using the Bosch Super Silence machine as an example:

The dishwasher is electrocuted

This is a rare problem, which indicates that the electric heating element is not broken, but there is a hole. It occurs due to long use, manufacturing defects or very hard water. Diagnostics and repairs are performed at the service center.

Rules of care and use

To avoid errors and breakdowns in the operation of the dishwasher, it is recommended to use it correctly. Following the operating rules will help:

1. The machine is installed in a dry place and on a flat floor.
2. If necessary, use a voltage stabilizer.
3. Use high-quality detergents.
4. Prevents the appearance of blockages and scale.
5. Before installing the dishes, remove all food debris and large pieces.
6. If you have a warranty card, do not try to fix the breakdown yourself.

With proper and careful use, your Bosch dishwasher will last for a long time. If errors appear frequently, it is recommended to visit a service center to find out the causes and troubleshoot problems.

Source

Emergency actions if an error occurs in the dishwasher

All methods of handling the dishwasher are described in detail in the instructions. There is not always time to choose and think for a long time about what actions to take. In such situations it is necessary to interrupt the program. To do this, turn off the device for 20 minutes or press the Start button for 15 seconds. After this, they begin to understand the cause of the problem.

If the breakdown is simple, for example, the water drain hole is clogged and the PMM has not completed the program, then you can fix it yourself. In the first case, the drain is cleaned, in the second, the program is restarted. But there are situations when the reason is completely unclear. This requires the help of a master.

How to stack dishes

Placing dishes in dishwasher baskets sometimes resembles a complex puzzle in which several conditions must be met at once. Firstly, contain all the dirty dishes, and secondly, arrange them so that each element of kitchen utensils is thoroughly washed with streams of water and does not overlap other dishes.

For the most rational installation, you should follow several rules:

1. It is better to place large dishes in the lower basket, and all small things (cups, bowls, saucers, glasses, etc.) in the upper one.
2. Place pots, pans, salad bowls and other large items upside down in the basket. Place plates on edge.
3. The location of the plates in the guides - large ones are closer to the walls, and small ones, on the contrary, are closer to the center of the washing chamber of the machine
4. It is better to wash cutlery in a special basket. This significantly saves space inside the unit.

After the dishes are folded, make sure that the rocker arms (sprinklers) from which jets of water fly out rotate freely without encountering any obstacles in their path.