Air conditioners are multifunctional devices that change the indoor microclimate. Even the name of the devices hints at their ability to change the state of a room or area of a room. Air conditioners are one of the most common household machines in the world. They are also one of the most useful; in the automated information age, a person simply cannot waste time lighting a fireplace to make the air around him warmer. Air conditioners also know how to make the space around them drier, colder, and warmer, as already mentioned.
All these abilities would be beyond competition for the average person if most of the imported devices were not written in English words. The basic air conditioner button (which can be located either on the control panel or on the device itself) is divided into sectors, each of which turns on and regulates a separate operating mode of the air conditioner. Or the function of the control button will be performed by the control panel, which may look different. Basically, it's a scattering of buttons.
Designers of leading air conditioner manufacturers have not stinted in their work, since introducing instinctively understandable icons on the control panel that embody the process that is triggered by the operating mode tied to a button is not the worst idea. But not all models have this attribute, and all old copies do without such little things.
Air conditioner modes: icons and captions on the control panel.
The vast majority of manufactured air conditioners come complete with remote controls. These remote controls contain a display and an air conditioner control panel. The display can show the air temperature around the air conditioner, humidity and other parameters. The control panel may look different. It can be a single button divided into active parts, or a scattering of buttons responsible for their own algorithm of actions. One way or another, all the flexible parts of the remote control are marked with an inscription or, possibly, a clear picture.
Typically, air conditioner manufacturers use the same names for the operating modes of their products. If air conditioners use the shortest and most convenient names for their various functions, then there is no point in inventing something new. Moreover, the names of the modes have already become the hallmark of the entire air conditioner production, oddly enough. Keeping the same names is also beneficial for the consumer, because it makes it easier to find a guide on the Internet on which switch does what.
However, this logic does not always work. Sometimes the remote control is equipped with a different control panel. So when purchasing such equipment, it is worth considering this aspect.
The most popular air conditioners of 2021
There are many different brands of air conditioners available on the market. The choice can be made based on the quality of the models and taking into account your preferences. Here are some of the highest quality models.
Electrolux EACS-07HG/N3
This model combines nice design and good functionality. The air conditioner operates almost silently; only at maximum load can a slight sound occur.
This model has the following features:
- It operates on an area of 20 square meters. meters.
- This device contains all the basic and most additional functions.
- Power is 616-650 watts.
- An air flow of 8 cubic meters per second is created.
It is possible to use a communication length of up to 15 meters.
Ballu BSWI-09HN1/EP/15Y
The device includes a large number of functions. In particular, various filters are used other than those designed for fine cleaning.
Its features:
- The air flow is 7.5 cubic meters. meters per second.
- The power of the device is 700-800 kilowatts.
Users note that the connection between the device and the remote control is not reliable enough.
Toshiba RAS-07EKV-EE
A communications length of 10 meters is provided here. The air conditioner can operate on an area of 20 square meters. meters.
Characterized by the following properties:
- Power 550-590 Watt.
- The air flow is 7.8 cubic meters. meters per second.
- Rich functionality is available.
This model does not provide for flow ventilation.
Basic air conditioner modes and their designations.
Conventional air conditioners are equipped with a significant number of functions, but the average user is unlikely to use most of them every day. On the other hand, the user will overwrite the values on the remote control that directly interact with the environment. The strength of their influence can be adjusted with a double button (+/-.) after selection on the control panel. Such operating modes can be combined into the concept of “basic”. The most commonly used functions are labeled cool, heat, dry, fan, and swing. One level lower in meaning and location on the control panel are modes such as sleep, lock, timer and the like.
In addition to text, modes can also be distinguished by illustrations: sun, drop, fan, snowflake, etc. Designations are associated with the properties of certain functions.
To quickly switch between the main operating modes, there is a “mode” button, which actually means “mode”. When pressed, the air conditioner will change the current mode to the next one. The shift is fixed in a strict order between cold, heat, dehumidification and fan. The order, however, depends on the desire, translation into Russian in the air conditioner.
The heat mode on the air conditioner is responsible for heating the room. The word obviously means “heat.” When operating this way, the device uses electricity to emit warm air, raising the air temperature.
The mode is turned on in spring and autumn during cold times of the day. In winter, it is better to rely on heating, since winter air has a negative effect on the components of the device.
If the air conditioner has modes designated using illustrations, then heat will be depicted as the sun.
How to turn on the split system for cooling
To enable this air conditioner mode, the following icons are needed:
- Using On we turn on the system.
- Press Mode until a snowflake appears on the display.
- If the snowflake is displayed as a separate button, skip the second point.
- Using “Temp” (“+”, “-”, up and down arrows) we set the desired temperature.
- By pressing fan, select the desired blowing speed.
To turn the system on for heating, the steps are the same. Just look for the heating icon on the air conditioner: sun or heat.
Read more Service maintenance of air conditioners Price from 500 ₽ for maintenance
“Fan”, translation into Russian in the air conditioner.
Among the air conditioner switches you can find the “fan speed” option. If we translate this word into Russian, we get “fan speed”. The function may also be referred to simply as "fan", which is equivalent to the word "fan". When selecting this mode, you can change the rotation speed of the valves in the unit. If you increase the rotation speed, the air conditioner will cool and heat the room faster. The fan often changes rotation speed, as its operation is automated. The speed is calculated from the difference between the set temperature and the room temperature. The speed can be fixed using the button marked “fan”. As a rule, you can choose three or four rotation speeds.
"Fan" is indicated by a fan symbol.
Sequence of setting up any air conditioner
- First, turn on the air conditioner in the “network”;
- Turn on the device with the “On/off” button;
- Select the desired mode with the “Mode” button. We wait 10 minutes, and at the same time continue setting up the following points;
- We adjust the desired temperature using the “Temp” buttons or arrows;
- If required, we adjust the desired fan rotation speed;
- If required, we adjust the direction of air flow by adjusting the “Swing” blinds;
- If required, we activate additional options - ionizer, self-cleaning, “i-feel”, “sleep”, “turbo” and others.
PS If the current temperature in the room matches the set temperature, the air conditioner will not cool (or heat depending on the mode).
Other modes.
Cool.
The most used mode is called "cool". The Russian translation of this air conditioner mode sounds like “cold”. And it lowers the air temperature, just as the name suggests. The reason why the regime is classified as “other” is banal. He's the main one. After purchasing such a device, any person will first press two buttons: the big red one, and then the button with the snowflake icon.
Swing.
The set of modes also includes a less popular function, which allows air to be evenly distributed throughout the room thanks to the swing of the air distribution dampers (blinds). They are located in the device in front of the modules that create the air flow. If you translate “swing” (as the mode is marked on the remote control), you get “swinging”. After selecting this option, the blinds will begin to move up and down.
“Swing” has the symbol of three horizontal plates parallel to each other.
Air flow.
Another switch is associated with the “swing” option – the “air flow” button (or “air flow direction”). “Air flow” means “air flow”, and “direction” means direction. This function allows you to fix the position of the blinds, thereby directing the air flow in only one direction. To activate this function, you must first turn on the damper swing. By pressing the “swing” button, wait until the blinds are in the desired position. Then click "air flow". The air will blow in the direction the dampers point.
This option may be indicated by several wavy lines.
Timer.
Another function allows you to set a timer for turning on the air conditioner. This mode is operated using the display.
The start button is indicated by a wall clock symbol and/or the word “timer”
Auto.
Many modern systems are capable of operating in automatic temperature control mode. In this mode, the air conditioner is able to independently regulate the air temperature if it does not meet the specified parameters. You can set such parameters, or allow the machine to independently determine the comfortable temperature. One way or another, in this mode, the machine will independently make the air in the room colder or warmer if it detects excess heat or cold.
The mechanism will also prevent the room from becoming too dry or damp.
The start button usually has a large word AUTO on it.
Sleep.
Sleep is a night silent operating mode. Sleep sets the ideal room temperature for sleep and maintains it. Almost identical to automatic mode, adjusted for noiselessness. And also that Sleep is more of a safety net in case of a sudden cold snap at night.
Night mode is indicated by a month or a star.
"Turbo", "jet cool", "powerfull".
The mode, called “turbo”, “jet cool” or “powerfull”, allows you to briefly increase the power of the device until the air in the room reaches the desired state. On average, this mode does not work for more than half an hour. The mode can have different names, they usually mean “full power” or “turbo mode” in Russian. If there is a button on the remote control that is labeled with some pretentious name, most likely this is this function.
It is also designated according to the power of the designers’ imagination: a muscular arm, lightning, and the like.
Remote control functions.
The remote control may also have additional functions. These functions do not directly affect any capabilities of the air conditioner, but largely relate only to the remote control. Manufacturers often add them to their creations. As a rule, these are two main modes. Lock (close) protects the remote control from children, LED (light emitting diode) turns the remote control backlight on and off for comfortable operation at night.
Lock is indicated by an illustration indicating a lock, and the backlight is indicated by LED.
Timer
When it comes to such a useful but little-studied function as a timer, you need to understand that it is present in almost all models of air conditioners. With its help, you can not only make automatic transfers from one mode to another, but also configure more economical operation of the entire device.
Turning on the split system at the time when it brings the greatest benefit to the family and turning it off when the household is away makes the timer a profitable and convenient device. Some manufacturers set one for a period of 12 hours, and there are also manufacturers who set several timers to turn on different modes in the air conditioner.
To set the time, you need to press the “timer” button, after which the signal light on the display will light up. The time can be set in 30 minute intervals for up to 3 hours. And in increments of one hour - up to 24 hours. To activate the timer, after setting the time, no later than 10 seconds, press the Set button. Using the timer, you can enable or disable many additional functions on your air conditioner.
Instructions for setting up a universal remote control
Regardless of the model, all universal devices are configured according to the same principle, which consists of entering the required code into the remote control memory. Ideally, the remote control comes with instructions with a table of codes for different models of climate control equipment. The remote control is configured in two modes - automatic and manual.
Automatic mode is especially convenient if you do not know which model your air conditioner belongs to, or its name is simply not in the code table. In any case, the first thing you need to do is carefully study the instructions that came with the remote control.
Setting up the remote control manually
Some remotes can only be set up manually, which can take about 2 hours.
After you have studied the instructions, you will need to program the air conditioner yourself, manually selecting the codes written in the column of the manufacturer of your climate control equipment.
For each air conditioner manufacturer there are about 6 different codes that you have to manually enter to configure the universal device
Insert batteries into the remote control and turn it on by pressing the appropriate button. Next, the main operating modes of your climate control equipment should light up. You should also find the name of your equipment in advance in order to enter the appropriate code to configure the remote control.
Click on the “Select” , then enter the first code from the table indicated after the brand name. In this case, the code is entered using the number buttons on the remote control. Press “Select” again and confirm the action by pressing the “OK” button.
Next, you will need to check all operating modes of the air conditioner using the new remote control. If the basic functions do not work, then you should try entering the following code from the table. You may have to repeat this step several times until you find the code you want.
Automatic remote control setting mode
If the code for your split system is not in the table presented, then you should configure the device automatically.
This method differs from the previous one only in that you do not have to manually enter all the codes.
Before purchasing a universal remote control, be sure to make sure that in addition to manual mode, it also supports automatic code search
Point the remote control at the equipment so that it can receive all of its commands. Press and hold the “Select” button for 30 seconds. During this time, the device will go into automatic code search mode, sending commands and searching through all possible codes, starting from 0001.
After the remote control starts controlling the air conditioner, you will hear a characteristic signal coming from the air conditioning equipment. To stop the code scanning process, press any button on the remote control, then use the remote control to check whether all air conditioner commands are working.
If the remote control only partially controls your air conditioner without switching between operating modes, then you should start the code search process again. This will have to be done until the remote control controls the split system correctly.
The remote control stopped working after setting the code
Even after finding the correct code, a situation may arise that the remote control completely stops working. First of all, you should check whether the air conditioner is connected to the network.
If the air conditioner is turned on in the system and there have been no power failures, it is important to check if the code you set is correct.
A similar situation may arise due to a simple failure in the electrical network, which arose against the background of its overload with other electrical appliances in your home
If the remote control works, try setting the code to auto-search again or enter it yourself. And only if the remote control and air conditioner do not respond, the problem may be a breakdown of the climate control equipment.
Special abilities
There are a number of special features found mainly in premium models. They are aimed at creating a healthy microclimate, economical energy consumption and ease of system management.
- Air cleaning . The issue of multi-level air purification is receiving increased attention today. Climate control equipment is equipped with fine filters (carbon, electrostatic, ultrasonic, enzyme) designed to remove bacteria, dust, pollen, animal hair and unpleasant odors.
- Ionization . Ionization is the saturation of air with negatively charged particles that have a positive effect on human health. Ionization has an antibacterial effect, removes tobacco smoke, unpleasant odors, and toxic chemical compounds.
- Volume flow . The 3D Auto function makes the blinds work in different directions. As a result, a volumetric air flow is created that reaches the most inaccessible corners of the room. This air supply ensures a constant microclimate and the absence of drafts.
- I Feel . The option is aimed at automatically selecting a mode that is comfortable for the owner. It is based on the analysis of data such as the current room temperature, humidity level and user activity history. Depending on the information received, the device begins to heat, cool, dry the air, etc.
- Night mode . Provides restful sleep for household members. After pressing the corresponding button, the system begins to work more quietly, creating ideal conditions for deep and long sleep. When you select the specified program, the system goes into economy mode.
- ECO saving mode . Allows you to enjoy all the benefits of technology and save approximately 25% of electricity. That is, the climate system will maintain the temperature at a comfortable level, while operating in conditions of minimal noise and economical consumption of energy resources.
- Smart eye .
The smart eye (motion sensor) is aimed at creating a favorable atmosphere and reducing energy consumption. If the sensor detects the presence of people in the room, the indoor unit will begin to regulate the air direction, preventing the flow from reaching those present. If there is no movement for a certain time (on average 20 minutes), the system switches to economy mode. Video. I See sensor function in Mitsubishi Electric air conditioners - Warm start . The function will become indispensable in the cool season, when the device works for heating. “Warm start” eliminates the supply of cool air to the room. This is done by temporarily blocking the fan (until the freon reaches the parameters required for heating).
- WiFi. The device can be controlled without using a remote control - via a computer, tablet or smartphone. The function is relevant for devices equipped with a Wi-Fi module. To turn the air conditioner on or off, set the desired temperature and air flow speed, select the mode and position of the dampers, you need to download a special application.
Additional options
In addition to the listed features, some manufacturers provide their products with additional options.
- Jet Cool. On air conditioners of different brands this function is called “Powerfull”, “Turbo”, “High Power” or “Turbo mode”. It is used to quickly cool a room to a comfortable temperature. In this case, the split system increases productivity by 20-30% and can work in this mode for up to half an hour.
- I Feel. This option can be used if there is only one person in the room or several, but they are concentrated at one point in the room. When this function is activated, the temperature is measured in the place where the control panel is located, in contrast to the standard mode, which involves sensors on the indoor unit. Using the “I Feel” option means that the temperature near the indoor unit will be lower than in other parts of the room.
- Presence sensor. Split systems with an infrared presence sensor determine whether there are people or animals in the room. If they are present, then the equipment operates in the specified mode. In the absence of living creatures, the air conditioner activates the energy saving mode. This allows you to save up to 30% of electricity. You can find such a function in expensive split systems.
- Breeze mode. This option allows you to create the illusion of a natural breeze. By closing your eyes, a person can feel like he is on the seashore. Used on production air conditioners
- GSM module. The function is designed for remote control of a split system using SMS. This module is installed in premium models of air conditioners from various manufacturers.
- Self-cleaning. During operation of the split system, moisture forms in the indoor unit. The self-cleaning function dries this entire compartment, preventing the formation of bacteria, fungi and mold.
Features of using the remote control
Sometimes buyers are unable to set up a split system for cold for one simple reason - the remote control is used incorrectly. First of all, install new batteries in it. If you do not use the air conditioner for months, it is better to remove the batteries from the remote control and insert them only before using it.
Do not drop the remote control on hard surfaces, do not fill it with water or drinks, treat it with care. Do not adjust the air conditioner from across the room or from an adjacent room. Do not run your air conditioner with the window open, otherwise you will reduce its efficiency and increase energy consumption.
Turning on the air conditioner without using the remote control
Is it possible to turn on the device without a remote control and without Wi-Fi control? Yes! To do this, you will need to find a backup button located on the case or under the cover. Often it is highlighted. It is worth noting that when turned on in this way, only 2 modes can be activated - “Auto” and “Cooling”.
The number of modes in air conditioner models from different manufacturers can vary widely. Before purchasing climate control equipment, decide which functions you need first. This will help you choose a model that will fully meet your expectations and be affordable.
The air conditioner does not go into heating mode
Among the brands of split systems produced by manufacturers, there are devices that do not provide an air heating function. Read the instructions for your air conditioner to make sure there is a “warm” mode in the equipment program. The appearance of “Heat” on the remote control display also indicates that this option can be configured.
It must be taken into account that the transition of the air conditioner to heat supply takes some time. Wait 15 minutes and, if you do not feel the arrival of heated air, reset the settings and repeat switching the device again according to the previously described scheme.
Some models of split systems are equipped with protection against the first activation of the heating mode. In this case, you should turn off the device by pressing the corresponding button on the remote control, remove the batteries and unplug the power cord from the outlet. Then insert the batteries, turn on the device and repeat the operation of setting the air conditioner to heat from the beginning. Wait 15 minutes.
If all efforts are unsuccessful and the air conditioner does not switch to heating mode, contact a service center to troubleshoot the problem. Disassembling the equipment yourself, trying to find a breakdown and repair the split system is a risky endeavor. Without the appropriate knowledge and experience, you can only make the situation worse.
Important! Before setting the air conditioner to heat, check at what outside air temperature the manufacturer recommends operating the climate control equipment installed in your home. When using the equipment in unacceptable conditions, parts of the outdoor unit will freeze and fail.
