Geyser Electrolux: description, characteristics, models, reviews

Review of several Electrolux geyser models: GWH 265 ERN NanoPlus

This model of equipment costs 6800 rubles. The column has modern electronic control and a display with indication, which allows the consumer to control the operation of the device. The model has a heat exchanger made of acid-free copper, made using modern OXYGEN FREE technology. The heat exchanger is completely safe, reliable and durable. The service life of the column is increased thanks to a multi-level security system.

Model specifications

The Electrolux GWH 265 ERN nanoplus geyser has a rated power of within 20 kW. The equipment has automatic ignition. The body weighs only 7.8 kg. The design has an open combustion chamber. The equipment has a power-on indication and display. In one minute you can get up to 1000 liters of water.

The Electrolux GWH 265 ERN nanoplus geyser does not have a control panel. However, the manufacturer took care of the presence of additional functionality, namely gas control and a safety valve. You may need the chimney diameter to connect equipment. This parameter is 110 mm. The dimensions of the case are 550x328x180 mm.

Device features and purpose

The Electrolux geyser is reliable and has a well-thought-out design. The design is energy-intensive and in a minimalist style. There are toggle switch handles on the body - they are used to switch modes, adjust heating power, and water supply. The throughput capacity of the devices is about 16 liters of water in one minute, but much depends on the model, please check. The purpose is universal, there are no restrictions in terms of installation objects. Exhaust system – any.

Structurally, the Electrolux geyser consists of:

• Control pads (there are adjustment buttons);
• Heat exchanger (copper);
• Valve (solenoid);
• Inlet openings (water, gas);
• Output devices for hot water supply;
• Chimney openings;
• Drain tap;
• Fasteners.

That is, the device of the Electrolux geyser is relatively simple, all devices are repairable. The equipment is ideally adapted to the needs of the Russian market and is calm about a sharp decrease in pressure in water and gas systems.

The main purpose of the installations is to supply hot water. Electrolux geysers can be installed in residential and commercial premises.

Power

Electrolux automatic water heaters come in three performance categories:

• 1st degree – from 17 to 19 kW;
• 2nd degree – 22-24 kW.
• 3rd degree – 28-31 kW.

The more powerful the installation, the more expensive it is. There is no point in paying just like that anymore, but you need to understand that a device of the 1st degree of performance simply cannot cope with heavy loads.

Control

Manual adjustment is not the most convenient option, since the water pressure in the system is constantly changing. Electrolux water heaters are equipped with modulated power burners that automatically regulate the gas supply.

Ignition type

Among the features of the brand's geysers are the type of ignition.

Possible options:

• Spark - match, lighter, outdated version, the system is used only in very old models;
• Turbines or a battery are the most functional, modern, simple, reliable option. The tap opens and the device starts working;
• Piezo – this functionality comes with Electrolux geysers of the Nano Pro series.

Good to know. Piezo ignition is the most modern and popular option. The device has a special button for quick activation. The method is not suitable for models installed at a distance from the access point (that is, it is difficult for a person to reach the button).

Safety

The Electrolux VPG geyser and other series are equipped with a 3 or 4 level security system. This ensures precise, quick shutdown of the unit in the event of incorrect operating input parameters.

Feeding stops when:

• The appearance of reverse thrust;
• Absence of traction in principle;
• The gas boiler turns off due to lack of flame.

Backdraft poses a huge danger for rooms in which combustion products are discharged through the chimney.

Design

The Electrolux geyser can be made in any design - minimalism, classic, hi-tech, so you will find an option for your room. There are models with replaceable front panels, the ability to program the design. The most popular option is classic or minimalism with a display on the external panel.

It allows you to monitor operating parameters and notify you of malfunctions.

GWH 285 ERN NanoPro - technical specifications

The described Electrolux geyser, reviews of which are mostly positive, has a number of advantages:

• durability;
• ease of control and management;
• ease of use.

As for durability, the model is provided with a heat exchanger, which is made using innovative technology. This increases its resistance to various negative influences during operation. The design, according to consumers, is also distinguished by its ease of control and management. The equipment is equipped with an indication panel and display. With this interactive system you can monitor the temperature, flame presence, battery charge level and water circulation.

Buyers especially emphasize that such Electrolux geysers, the characteristics of which are presented in the article, should be studied by you before purchasing the product. They are easy to use because they have ignition electrodes that provide smooth, quiet ignition with ionization control of the flame.

Owners of geysers who have already enjoyed their quality consider additional advantages:

• presence of a protective thermostat, draft sensor, hydraulic safety valve;
• heating power adjustment function;
• intelligent control;
• European smoke removal technologies;
• universal chimney diameter.

The main advantages and disadvantages of Electrolux geysers

Let us dwell in more detail on what positive qualities Electrolux geysers have.

• safety of equipment. The device can prevent a fire hazard using a protective shutdown system installed in mid-price segment models;
• maximum savings. When choosing even the most budget-friendly option for a gas water heater, you can be sure that it will use fuel efficiently and heat water to the optimal temperature;
• additional options to choose from . Easily choose models with interesting features. Sooner or later you will want to use indicators or a flame control window;
• long service life . Despite the long warranty period (about 5 years), devices from the Electrolux brand have been operating successfully for decades after its warranty;
• nice design. There is absolutely nothing superfluous on the body of the device: the streamlined shape without flaws and well-fitting controls combine perfectly with each other;
• convenient use. Whatever the control function - electronic or mechanical - both of them have proven themselves among owners.

For ten years, the brand has proven itself as a supplier of incredibly reliable and impeccable equipment to the CIS countries and Russia.

If the local gas supply organization has presented you with requirements for obtaining permission to use Electrolux geysers, you can legally refuse this. Remember that connecting the device is free, you only need to pay for maintenance and provide a passport for the gas water heater model.

We digress a little, but let's get back to what can upset you as an accomplished owner of an Electrolux gas water heater.

• uncomfortable water heating . While most boilers have a heating tank, geysers from the manufacturer Electrolux do not have this option. The technology heats the water using a running method: everyone will need to go swimming immediately one after another;
• heavy ignition . In the absence of the necessary draft, it will be difficult to ignite the device. Sometimes this can even cause the installed piezo to break;
• does not work at low water pressure . If you live in a private sector, and someone often waters their gardens from a public water supply, then in the evening you notice low water pressure. In such conditions, the geyser is unable to work. To avoid such inconveniences, owners additionally install a pump.

So, we have discussed all the qualities that are useful to study before purchasing a device. Of course, in addition to this, it is important to understand for what specific purpose a gas boiler is being purchased, and then focus on all possible characteristics.

Description of the GWH 285 ERN NanoPro column

This Electrolux geyser costs 12,400 rubles. It is a flow-through gas water heater equipped with a stainless steel burner and a copper heat exchanger. The function of maintaining the heating temperature and smooth adjustment are made possible thanks to modern INVERTER Control technology.

The device panel has a heating temperature regulator and a power regulator. There the user will be able to find the key that is responsible for turning it on and off. The operating status indicator is located in a visible place. It will glow green while the burner is operating. Analysis of the operation of the water heater and constant monitoring of operation are provided by Intelligent control technology.

Operating instructions for geysers Electrolux

Installation, first start-up, maintenance - all these are the main and very important components of using gas water heaters. If you miss any moment or turn on the device incorrectly, there is a risk of a dangerous situation. To prevent this from happening, you need to know all the intricacies of use, which can be studied in our guide.

Features of turning on the Electrolux heater

To start a gas heater you do not need to have any special knowledge, you just need to follow safety precautions and not create an emergency. To help the user, our editors offer the following video, which shows how to start the device and configure the operating mode.

Model specifications

The Electrolux gas instantaneous water heater described above has a rated power of 19.2 kW. The design has an auto-ignition function, gas control and power-on indication, but the equipment does not have a remote control. The chimney diameter is 110 mm, the body dimensions are 578x310x220 mm.

The consumption of liquefied or natural gas during equipment operation reaches 2.3 m³/h. The column does not have a heating indicator. The design is equipped with an open combustion chamber. The unit weighs 8.62 kg. The maximum water heating temperature is 75 °C, while the productivity is 11 l/min.

Reviews about the model

The Electrolux geyser described above, according to consumers, has many positive features, among them the following should be highlighted:

• ease of control;
• the ability to control the operation of the device;
• electronic ignition;
• stainless steel burner;
• impressive burner nozzle diameter;
• additional microswitch.

As for ease of control, it is ensured by power switches and a regulator, the latter of which is responsible for changing the water heating temperature. These keys are located on the front panel and are easy to find. Consumers consider the copper heat exchanger as additional advantages, as well as INVERTER Control technology, which provides the ability to maintain the heating temperature and smooth adjustment. The microswitch is located on the body and is responsible for turning off the water heater if errors occur during its operation.

Proper care of geysers from Electrolux

Repair and maintenance of geysers is carried out directly by service specialists. The user should not unnecessarily disassemble and dismantle the device, especially when trying to find out how the mechanism works inside.

In addition, you, as the owner, should know some recommendations regarding the care of your gas water heater.

1. Keep the device perfectly clean. Wipe off dust regularly and prevent moisture and condensation from settling - this is especially true for equipment located in the kitchen. And if this happens, try to dry everything quickly.
2. Do not cover the device with rags and other objects; do not store trinkets and souvenirs on top.
3. During operation, the unit does not need to be wiped with a damp cloth or general cleaning done. When the column is hot, the wet enamel turns yellow.
4. If the heater often blows out, determine what the problem is - and, if necessary, call a technician. Never try to fix anything inside with sharp objects.

In short, treat appliances the same way you would other types of equipment in your home. Then you will probably not encounter any problems with operation for many years to come.

Description of the geyser GWH 350 RN

This Electrolux geyser costs RUB 17,800. It is a instantaneous water heater with a stainless steel burner. In this case, the heat exchanger is also made of copper. Starting the device is simplified thanks to piezoelectric ignition. The unit can operate in one of two modes. One of them is economical, while the other provides maximum power.

There are switches on the case with which the user will be able to adjust the operating parameters. You can visually monitor the presence of a flame using the viewing window.

Which is better to buy an Electrolux geyser: let’s evaluate the important parameters

It’s also not worth stopping at the popularity of models alone. Our experts encourage the user to accurately determine the main technical characteristics that meet your expectations. So, what things should you pay attention to in order to avoid becoming a victim of an unwanted purchase?

Design and power - how they will change for rooms of different sizes

For houses with large dimensions, different models of Electrolux equipment are suitable - the main thing is that they have high power (from 28 kW) and are able to process up to several water intake points. This is welcome in country houses and dachas. However, you don’t have to limit yourself to a discreet design. If you have the financial opportunity, you can purchase a model to order.

Please note the need for regular cleaning of geyser nozzles. Devices with maximum power clog especially quickly.[/caption]

If you are purchasing water heaters with intended installation in a small kitchen, then the optimal indicator would be a power of up to 24 kW. This is quite enough to heat water in a small “Khrushchev”.

Which control and ignition method is best for a gas water heater?

If you have ever seen a gas water heater from friends or relatives, you have probably been given all sorts of advice on how to control it. It’s up to you to decide which way is more convenient to control the speaker – using flat touch buttons or by turning knobs and toggle switches.

Regarding the electronic control of Electrolux geysers, we can say the following: they do not tolerate contact with moisture. You won’t be able to go to the appliance and increase the temperature immediately after washing the dishes until you dry your hands. But mechanical pens work even in damp conditions - but is it worth exposing them to this again?

The type of ignition of gas water heaters is conventionally divided into three types:

• launch using piezo;
• electric ignition (using batteries);
• from open fire (matches, lighter).

Each method of turning on the device is good in its own way, but can also bring some inconvenience. For example, it will not be possible to light a speaker without electricity if the element is a piezo component; After the batteries are discharged, you will also not be able to cope with starting the equipment. The only alternative option left is to use matches for ignition. Again, they should always be in the house.

Gas water heater safety

What is this property? Almost every second buyer asks this question. The safety of the device lies precisely in the presence of additional protective capabilities:

• thermostat that prevents overheating of the device;
• protective shutdown in case of gas or water pressure drop;
• a check valve that relieves pressure if it goes beyond normal limits and threatens to explode;
• a protective shutdown (built-in RCD) is useful in case there is a voltage failure in the electrical network.