TOP 22 best screwdrivers: 2020-2021 ranking of budget and professional models

How to choose and what to pay attention to?

  1. Pay attention to the type . There are electric screwdrivers, electric impact wrenches, impact and non-impact drills. The first two types are designed to solve small household problems. For example, secure a shelf, tighten a fastening element. The latter are intended for professional purposes. They differ in functionality, durability, and build quality. But they also cost much more. Before choosing, it is important to decide on the tasks that the screwdriver will perform.
  2. For torque . To work with soft materials, 5-10 Nm is enough, with hard materials - from 35 Nm.
  3. By cartridge type . It can be key and quick-clamping. According to reviews from owners, it is better to choose a screwdriver with a quick-release chuck, since the key often fails at the most crucial moment.
  4. On the type of battery (if a cordless screwdriver is purchased). Manufacturers create batteries based on nickel-cadmium and lithium-ion technologies. NiCd has a limited service life, minimum working time without recharging. It is better to choose Li-Ion. Such batteries have an extended service life, long operating time without recharging, and high power.
  5. On the package and build quality . The wider the configuration, the more versatile the screwdriver. It is also recommended to take into account the manufacturer. The following brands have proven themselves well: Makita, Bosch, Interskol, Metabo. They have more positive reviews and offer only high-quality products with good equipment.

Battery power and types

An important question for builders is how to choose a cordless screwdriver tool? When choosing a cordless tool, be sure to look at the features of its charging. Drills and screwdrivers can be equipped with batteries with voltages from 7.2 to 36 volts. For home repairs, it is recommended to choose a tool with a voltage of 9 to 12 volts. Models with a power of more than 18 volts are suitable for professional builders.

One of the instruments from foreign manufacturers.

The power of the drill/driver depends on the type of electric battery selected. It can be nickel-cadmium, nickel-metal hydride and lithium-ion.

The most inexpensive batteries on this list are nickel-cadmium (NiCd). They are relatively heavy, but such batteries are inexpensive, can withstand about 1000 charge-discharge cycles and operate at sub-zero air temperatures. Such batteries provide stable power and do not overheat.

Nickel metal hydride (NiMh) batteries cost a little more, take longer to charge, are more compact and can also operate at low temperatures.

The lightest and fastest charging batteries presented are lithium-ion (Li-Ion). They charge quickly, and the charging and discharging of the battery is controlled by a special protection system. One of the disadvantages of such batteries is that it is problematic to work with them in winter frosts.

Thus, each type of battery has its own advantages and disadvantages, so it is impossible to say for sure which one is better.
It all depends on the time of year, the object and the type of work you are going to do. Expert opinion Sergey Pochtarev, master, Nizhny Novgorod.
If you are on a small budget, I would recommend purchasing a classic screwdriver with lithium batteries. They are lightweight, charge quickly and last a long time.

The best inexpensive screwdrivers

Rokodil Twist Pro

Rokodil Twist Pro

Powerful cordless screwdriver with hammerless drill. New this year and one of the best screwdrivers in terms of price-quality ratio at the moment.

For comfortable and reliable use, the model is equipped with a quick-release chuck, reverse, backlight, speed control, engine brake, and spindle lock.

It is also worth noting the manufacturer’s warranty for a period of 5 years. The high torque of 42 Nm allows the screwdriver to be used for any type of installation work. Despite the high power, the weight of the model is only 1.15 kg. And thanks to the rubberized inserts in the grip area and the convenient location of the control elements, you can use the screwdriver for a long time without feeling discomfort.

Characteristics:

  • cartridge diameter - 10 mm;
  • torque - 42 Nm;
  • hole diameter on wood - 20 mm, metal - 6 mm;
  • battery capacity - 2 Ah, voltage - 16 V;
  • Includes branded case, two batteries, charger;
  • weight - 1.15 kg.

Advantages:

  • High power;
  • Functional;
  • Convenience and reliability in operation;
  • Light weight;
  • Low cost;
  • Availability of additional battery and case.

Flaws:

Metabo PowerMaxx BS 2014 Basic

Cordless screwdriver with hammerless drill. It has a shortened design that increases versatility of use.

You can work without a drill chuck thanks to the spindle with hexagon socket for bits.

Powered by lithium-ion batteries, and they, in turn, are equipped with an indicator to monitor the state of charge.

Ultra-M technology has also been introduced, which allows you to operate at maximum power in a battery-friendly mode.

Built-in light to illuminate the work area, a practical hook for carrying the tool on a belt.

Characteristics:

  • cartridge diameter - 1-10 mm;
  • Max. torque - 34 Nm;
  • drilling diameter for wood - 22 mm, metal - 10 mm;
  • battery capacity - 2 Ah, voltage - 10.8 V;
  • Includes two batteries, charger, case;
  • weight - 0.8 kg.

Advantages:

  • reverse mode;
  • removable cartridge;
  • good power indicators;
  • long lasting batteries;
  • smooth speed switching.

Flaws:

Bort BAB-18Ux2Li-FDK

Bort BAB-18Ux2Li-FDK

Compact screwdriver with built-in hammerless drill. Equipped with a quick-release chuck for easy changing of equipment, reverse, and instant engine stop.

It features a high torque (33 Nm), allowing you to carry out any installation work. Lithium-ion batteries charge quickly, hold a charge for a long time, and make the tool lightweight.

The work area is illuminated and has a rubberized insert on the handle. This screwdriver is comfortable to use, which is why it occupies a high position in the market.

Characteristics:

  • cartridge diameter - 0.8-10 mm;
  • drilling diameter for wood - 23 mm, metal - 10 mm;
  • battery capacity - 1.5 Ah, voltage - 18 V;
  • Includes branded bag, charger, two batteries, bat;
  • weight - 1.2 kg.

Advantages:

  • easy to use;
  • fast charging (1 hour);
  • reverse mode;
  • dynamic engine brake;
  • good power;
  • secure grip.

Flaws:

  • inconvenient gear shifting;
  • no magnet.

Interskol DA-12ER-02 595

Interskol DA-12ER-02 595

Cordless screwdriver with built-in hammerless drill. A bright representative of the “Home Master” series. It is an excellent combination of high build quality and modern technological solutions.

Equipped with batteries with lithium-ion technology - long operation on a single charge, high energy capacity.

There is an excellent balance between battery capacity and engine power.

There is a clutch to limit the force in the 18+1 period, a two-speed gearbox with metal gears that guarantee high efficiency of drilling and tightening.

A system has been introduced to protect against motor damage due to severe overload.

Characteristics:

  • cartridge diameter - 0.8-10 mm;
  • torque - 28 Nm;
  • Battery capacity - 1.5 Ah, voltage - 12 V, charging time - 1 hour;
  • Includes case, charger, two batteries, set of drills and bits;
  • weight - 0.96 kg.

Advantages:

  • compactness with a shortened base;
  • spindle autolock;
  • convenient T-type design;
  • charge level indicator;
  • backlight;
  • reverse;
  • good equipment.

Flaws:

VORTEX DA-18-2K

VORTEX DA-18-2K

Powerful screwdriver with built-in hammerless drill. Powered by NiCd batteries. Suitable for working with any type of base, thanks to a two-speed gearbox and reverse mode.

Equipped with a quick-release chuck, which has an extended service life and allows you to instantly replace the equipment.

For a secure grip, there is a rubberized insert on the handle. The tool is easy to use, and when working at heights, you can place the attachments in a special socket.

Characteristics:

  • cartridge diameter - 1-13 mm;
  • torque - 32 Nm;
  • battery capacity - 1.5 Ah, voltage - 18 V;
  • There is a locking start button, an electronic speed controller;
  • Includes case, charger, two batteries.

Advantages:

  • lightweight and compact design;
  • torque adjustment;
  • smooth gear shifting;
  • durable cartridge;
  • good power.

Flaws:

  • poor quality batteries;
  • severe overheating;
  • short-term charging.

BOSCH GSR 120-LI

Compact screwdriver with built-in hammerless drill from the Professional series. Operates on the BOSCH PRO-MIX 12 V battery system with lithium-ion technology.

The tool has a long service life due to its durable housing and Electronic Cell Protection system.

Quick and convenient changing of accessories is guaranteed by the quick-release chuck, which opens and closes easily. The two-speed planetary gearbox shows excellent results in drilling and tightening fasteners.

This professional model is designed for high-quality processing of any materials.

Characteristics:

  • cartridge diameter - 10 mm;
  • torque - 30 Nm;
  • hole diameter on wood - 20 mm, metal - 8 mm;
  • Battery capacity - 1.5 Ah, voltage - 12 V, charging time - 1.5 h;
  • There is a spindle lock, lamp, button lock on, reverse;
  • Includes 2 batteries, charger, case;
  • dimensions - 18.2x19.6 mm;
  • weight - 0.99 kg.

Advantages:

  • reliable assembly;
  • lightness and compactness;
  • batteries can be used in other models in this series;
  • high power levels;
  • high-quality work with any materials;
  • long lasting batteries.

Flaws:

Types of cartridges

A review of screwdrivers shows that today almost all models are equipped with so-called quick-release chucks. It is with their help that you can quickly replace a drill or bit. This element is available on the market in two varieties: single- or double-clutch.

The first ones are easy to use. Installed with one hand. However, the spindle should not rotate. Therefore, many models have a locking function. It can be automatic, that is, as soon as the rotation has stopped, the spindle is blocked. And forced using a button.


Double-clutch chuck for screwdriver Source cdn.vseinstrumenti.ru

The latter are more difficult to operate. To replace the working tool in them, you need to hold the lower coupling with one hand, and release or tighten the upper coupling with the other hand.

There are also screwdrivers on the market with old jaw chucks, which require a special key. The latter always disappears somewhere, so replacing the working tool becomes a problem. But we must pay tribute that many masters keep the cam variety in reserve. With their help, you can bring the screwing to maximum parameters.

If your goal is how to choose a screwdriver for your home, that is, you will be doing small jobs using this tool, then we recommend purchasing a tool without a chuck. An adapter for a ¼-inch hexagon is installed at the end of the spindle.

The best drills and screwdrivers

Rokodil Twist Max

Rokodil Twist Max

Another powerful cordless screwdriver with hammerless drill from Rokodil. It has a high maximum torque of 48 Nm, which allows it to be used for almost all types of installation work.

The tool is equipped with a brushless motor with a reliable electronic overload protection system, a quick-release chuck, backlight, reverse, speed control, and spindle lock. All advanced technologies in the industry, high-quality components and materials are used in production, which is reflected in the manufacturer’s warranty for a period of 5 years.

The screwdriver is powered by a 2 Ah battery, which is enough for 2-3 hours of continuous operation. In addition, the kit includes an additional battery and a case.

Characteristics:

  • cartridge diameter - 10 mm;
  • torque - 48 Nm;
  • hole diameter on wood - 20 mm, metal - 6 mm;
  • battery capacity - 2 Ah, voltage - 18 V;
  • Includes branded case, two batteries, charger;
  • weight - 1.25 kg.

Advantages:

  • High power
  • Functional
  • 5 year warranty
  • Compact and ergonomic
  • Acceptable cost
  • Availability of additional battery and case

Flaws:

Makita DF457DWEX8

Screwdriver with hammerless drill. Equipped with a quick-release chuck for easy replacement of bits and drills. It has a two-speed gearbox and 16 torque levels, which expand the scope of its application.

The tool can be classified as a professional tool: it allows you to quickly and efficiently make holes on any type of base and work with various fasteners.

The dynamic motor brake function helps to obtain precise results when screwing in series.

Operates on lithium-ion batteries from the G series.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • torque - 42 Nm;
  • hole diameter on wood - 36 mm, metal - 13 mm;
  • capacity - 1.5 Ah, voltage - 18 V, charging time - 1 hour;
  • Includes two batteries, charger, 31-piece bit set Makita D-30667, case;
  • length - 22.1 cm;
  • weight - 1.7 kg.

Advantages:

  • easy and simple use;
  • good power indicators;
  • batteries hold a charge for a long time;
  • two speeds plus reverse;
  • rich equipment.

Flaws:

  • no lamp.

DeWALT DCD791P2

DeWALT DCD791P2

Powerful screwdriver with built-in drill and quick-release chuck. It belongs to the professional category of tools, since it has a torque of 70 Nm and 15 adjustment positions.

Powered by a DeWALT 20V MAX battery system with lithium-ion technology.

Equipped with a brushless two-speed motor in a metal protective housing.

Smooth gear shifting occurs due to an intelligent mechanism with built-in electronics. The owner can easily control the tool during operation.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • hole diameter on wood - 40 mm, metal - 13 mm;
  • Battery capacity - 5 Ah, voltage - 18 V, recharging time - 1 hour;
  • Includes case, charger, two batteries;
  • dimensions - 17.5x20.3 cm;
  • weight - 1.7 kg.

Advantages:

  • excellent power;
  • long lasting batteries;
  • reliable grip;
  • lightness and compactness;
  • bright backlight;
  • professional operation.

Flaws:

Makita DF457DWE

Cordless screwdriver with built-in hammerless drill. Equipped with a two-speed gearbox and a quick-release chuck. The power source is removable batteries based on lithium-ion technology.

Dynamic motor brake ensures precise results when working with fasteners.

The tightening force adjustment includes 16 steps, from which you can select the optimal screw tightening force.

The ergonomic handle is equipped with elastomer pads, so it fits comfortably in your hand.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • torque - 42 Nm;
  • hole diameter on wood - 36 mm, metal - 13 mm;
  • battery capacity - 1.5 Ah, voltage - 18 V;
  • Includes case, charger, two batteries;
  • length - 22.1 cm;
  • weight - 1.7 kg.

Advantages:

  • convenient slide switch;
  • well-designed start key;
  • charging indicator;
  • reliable grip;
  • good power;
  • compactness and lightness.

Flaws:

  • poor cartridge fixation;
  • rapid battery drain.

Brush or brushless?

If you need to work with a battery-powered tool, then it is better to purchase a brushless device..

The engine in such devices is lightweight and efficient, which is of great importance for cordless tools. The difference is less noticeable when using a corded electric tool.

If your finances are limited, then buy a device with a brush motor . Of course, you will spend more time replacing the brush, but it is usually inexpensive.

The best professional brushless screwdrivers

DeWALT DCD701D2 Li-Ion

DeWALT DCD701D2 Li-Ion

Cordless screwdriver with hammerless drill, quick-release chuck. Operates on DeWALT 12V MAX system with lithium-ion technology.

A striking representative of the XTREME Sub-Compact Series™. It has a shortened design for a more secure grip and convenient use.

Thanks to the brushless two-speed motor, the service life of the tool increases.

Dynamic brake allows you to get more accurate results when working with fasteners for long periods of time. The torque is sufficient for processing soft and hard surfaces.

Characteristics:

  • cartridge diameter - 10 mm;
  • torque - 57.5 Nm;
  • hole diameter on wood - 20 mm, metal - 10 mm;
  • battery capacity - 2 Ah, voltage - 12 V;
  • there is a reverse, spindle lock, lamp, button lock on;
  • Includes a TSTAK branded case, two batteries, and a charger.

Advantages:

  • compactness and ergonomics;
  • excellent weight distribution;
  • reliable grip;
  • bright backlight;
  • clip for hanging on a belt;
  • high build quality.

Flaws:

Makita DDF485Z

Cordless screwdriver with hammerless drill, quick-release chuck. Powered by a Makita 18V LXT system with lithium-ion technology.

The model has a long service life, and a brushless motor, a metal two-speed gearbox, an overload and overheating protection system, XPT technology, and ventilation holes on the case help increase it.

Thanks to its compact size and illumination, the tool is convenient for working in narrow spaces, especially when assembling furniture.

Characteristics:

  • torque - 50 Nm;
  • hole diameter on wood - 38 mm, metal - 13 mm;
  • battery voltage - 18 V;
  • there is a reverse, spindle lock, lamp, button lock on;
  • length - 18.2 cm;
  • weight - 1.1 kg.

Advantages:

  • high performance;
  • strength and wear resistance;
  • simple change of equipment;
  • dynamic brake;
  • metal bracket for wearing on a belt;
  • effective protection against dust and moisture.

Flaws:

  • the need to purchase a battery system.

BOSCH GSR 12V-30 Li-Ion

BOSCH GSR 12V-30 Li-Ion

Cordless screwdriver with hammerless drill. Representative of the Professional series. Shows impressive capabilities, excellent results in drilling, tightening and unscrewing fasteners.

Developed with Heavy Duty technology, introducing new standards in power, performance and reliability.

Thanks to it and the brushless two-speed motor, the tool is perfect for working with any type of substrate - both soft and hard.

It has proven itself especially well in drilling metal structures.

Characteristics:

  • cartridge diameter - 0.8-10 mm;
  • torque - 30 Nm;
  • hole diameter on wood - 20 mm, metal - 10 mm;
  • battery system - BOSCH PRO-MIX 12 V;
  • battery capacity - 2 Ah, voltage - 12 V;
  • Includes 2 batteries, charger, case.

Advantages:

  • reverse mode;
  • safety clutch;
  • overload protection system;
  • excellent power;
  • quality work results;
  • bright backlight.

Flaws:

  • severe overheating of batteries;
  • uncomfortable handle;
  • poor weight distribution.

DeWALT DCD791D2

Cordless screwdriver with hammerless drill, quick-release chuck. Powered by DeWALT 20V MAX system with lithium-ion technology.

The two-speed motor features Brushless technology, which improves the efficiency and performance of the tool.

The metal gearbox is qualitatively protected from dust and moisture, intense loads, and mechanical damage.

Increased torque with 15 positions allows you to work with the hardest materials. Thanks to its compactness and lightness, the tool can be used in confined spaces.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • torque - 70 Nm;
  • hole diameter on wood - 40 mm, metal - 13 mm;
  • Battery capacity - 2 Ah, voltage - 18 V, recharging time - 1 hour;
  • Includes case, two batteries, charger;
  • dimensions - 17.5x20.3 cm;
  • weight - 1.5 kg.

Advantages:

  • smart switch;
  • ease;
  • reliable grip;
  • high performance;
  • endurance;
  • high moment;
  • backlight

Flaws:

  • cartridge runout;
  • poor battery fixation.

Criterias of choice

When choosing a home or professional tool, you should pay attention to the following criteria:

Power supply. Screwdrivers can be powered by mains or battery. Electric corded models are convenient for constant professional work, but the length of the cord limits maneuver space. Rechargeable models are compact and mobile, but require periodic battery charging.

Power. The higher the power of the tool, the easier it copes with its tasks. Home screwdrivers are quite capable of performing any work with a device power of 800 W or more; professional models require higher parameters.

The power of the tool can also be attributed to the battery capacity. The higher this indicator, the longer it will take to charge the battery, but also the longer it will work.

Power and durability are affected by the design of the engine. Brushless models are more reliable, more powerful and more durable, but their price is high. Brush ones are inexpensive, but they have less power.

Torque. The higher this indicator, the better the screwdriver will cope with screwing screws into hard surfaces.

For household appliances that are used from time to time, it is enough to select a torque of 10 Nm; a professional screwdriver should produce from 20 Nm.

The best cordless impact screwdrivers

BOSCH GSB 12V-30 Li-Ion

BOSCH GSB 12V-30 Li-Ion

This tool is designed with Heavy Duty technology, setting new standards in power, performance and reliability. Operates on a brushless two-speed planetary motor.

Shows high results in drilling and working with fasteners.

The impact drill has 24,000 beats/min, so it is capable of breaking through the strongest foundations - concrete, brick, metal, and so on.

The dynamic motor brake helps achieve precise results when tightening screws or self-tapping screws. The safety clutch will protect the screwdriver from overloads and overheating.

Characteristics:

  • cartridge diameter - 1.5-10 mm;
  • torque - 30 Nm;
  • hole diameter on wood - 20 mm, metal - 10 mm;
  • battery capacity - 2 Ah, voltage - 12 V;
  • Includes two batteries, charger, case.

Advantages:

  • effective overload protection;
  • reliable drilling with impact;
  • high performance indicators;
  • lightness and compactness;
  • comfortable grip;
  • Long lasting brushless motor.

Flaws:

  • There is a defective assembly.

BOSCH GSB 120-LI Li-Ion

BOSCH GSB 120-LI Li-Ion

Cordless screwdriver with built-in hammer drilling function (22,500 bpm). It is flexible during use thanks to its impact mechanism and single-sleeve quick-release chuck.

Operation occurs in continuous mode on a single battery charge.

The two-speed planetary gearbox is made entirely of metal, which helps it withstand intense loads and mechanical stress.

Variable speed allows you to quickly and accurately control the speed, while the adjustment is carried out by an intelligent switch with electronics.

Characteristics:

  • cartridge diameter - 1.5-10 mm;
  • torque - 30 Nm;
  • drilling diameter for wood - 20 mm, metal - 10 mm;
  • battery capacity - 2 Ah, voltage - 12 V;
  • Includes 2 batteries, charger, case;
  • weight - 0.9 kg.

Advantages:

  • good performance;
  • effective overload protection system;
  • excellent weight distribution;
  • bright LED backlight;
  • stable impact mechanism.

Flaws:

Makita DHP482Z

Makita DHP482Z

Professional screwdriver with built-in hammer drilling function (max. 28,500 bpm). Equipped with a powerful two-speed motor and three operating modes.

Operates on a Makita 18V LXT battery system.

But the battery and charger are not included, which is a significant disadvantage. Shows excellent results when working with small M6 mounting screws and 10x90 mm screws.

Compact dimensions, light weight and backlight allow you to work with a screwdriver in confined spaces.

Characteristics:

  • cartridge diameter - 13 mm;
  • torque - 62 Nm;
  • diameter of holes on wood - 38 mm, metal and concrete - 13 mm;
  • battery voltage - 18 V;
  • Includes belt clip and bit;
  • dimensions - 19.8x23.8x7.9 cm;
  • weight - 1.8 kg.

Advantages:

  • reverse mode;
  • quick-release chuck;
  • comfortable handle with soft coating;
  • performance;
  • wide range of force limiter;
  • good weight distribution.

Flaws:

  • tight switch;
  • inconvenient location of the control key;
  • requires the purchase of a battery system.

The best corded screwdrivers

Interskol DSh-10/320E2

Cordless screwdriver with hammerless drill. Belongs to the category of professional hand tools. Equipped with a torque limiting coupling.

With its help, you can set the optimal force when screwing fasteners.

A smooth regulator for selecting speed and a durable two-speed electric motor increase ease of use and accuracy of work results.

The model is always ready for use, since there is no need to monitor the battery charge. Shows stable functionality when performing serial operations.

Characteristics:

  • cartridge diameter - 0.8-10 mm;
  • torque - 35 Nm;
  • power - 0.32 kW;
  • hole diameter on wood - 20 mm, metal - 10 mm;
  • cable length - 2 m;
  • weight - 1.4 kg.

Advantages:

  • good power;
  • suitability for performing everyday tasks;
  • stable work;
  • two speeds plus reverse;
  • secure grip.

Flaws:

  • short cord;
  • cartridge;
  • severe engine overheating.

Hyundai D 350

Hyundai D 350

Corded drill-driver with quick-release chuck and two-speed gearbox. The rotation speed can be adjusted using an automatic switch.

The tool runs at 1,350 rpm.

Nearby is a button for using the reverse mode. The rubberized handle provides a comfortable grip and eliminates rapid operator fatigue.

Compact dimensions and lightness increase comfort during long work.

Characteristics:

  • cartridge diameter - 0.8-10 cm;
  • torque - 24 Nm;
  • power - 0.28 kW;
  • diameter of holes on wood - 25 mm, metal - 8 mm;
  • there is a lamp, the button is locked on;
  • weight - 1.3 kg.

Advantages:

  • good power indicators;
  • comfortable grip;
  • bright backlight;
  • excellent drilling performance in brick and metal;
  • stable work;
  • reverse

Flaws:

  • poor fixation of equipment;
  • short cable;
  • loud noise.

Hanskonner HID2145P

Corded drill-driver with two-speed gearbox and quick-release chuck. Designed to work with furniture, false walls, and solve various repair problems.

It features 23 torque levels.

Therefore, the optimal force can be selected for a specific type of material. A handle with soft rubber pads ensures comfortable operation.

The kit includes spare carbon brushes that are easy to replace on your own.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • torque - 35 Nm;
  • power - 0.45 kW;
  • hole diameter on wood - 20 mm, metal - 10 mm;
  • there is the possibility of working in a drilling machine rack, reverse, spindle fixation, button lock on;
  • cable length - 4 m;
  • weight - 1.59 kg.

Advantages:

  • durable gearbox;
  • easy access to brushes;
  • quick-release chuck;
  • good power indicators;
  • high build quality;
  • secure grip.

Flaws:

Popular manufacturers

Bosch screwdrivers are the most famous in Russia. This company produces reliable and time-tested devices, they are of high quality and have a long warranty period. The company has been selling electrical equipment for more than 100 years, and does not lose its customers due to the good price-quality ratio.

Main features of Bosch screwdrivers:

  1. High-quality motors with high torque and speed.
  2. Lightweight and compact devices, which makes work easier.
  3. Use of multiple rotation speeds.

In addition to the German company Bosch, tools from the Makita brand have become popular. The company has been producing similar products for more than 60 years.

Advantages:

  • Ideal price-quality ratio for household devices.
  • Many modern models of screwdrivers are equipped with an impact function for processing concrete.
  • Compact size and good ergonomics.

Users note that the only disadvantage of Makita screwdrivers is the insufficiently powerful battery, which needs to be charged quite often.

The best powerful screwdrivers from 80 Nm

DeWALT DCD996P2

DeWALT DCD996P2

The professional impact drill/driver is a bright representative of the 18 V XR Li-ion XRP line. Equipped with a three-speed gearbox, single-socket keyless chuck, 11-position torque.

Users note excellent drilling of stone foundations.

This tool is perfect for solving a huge number of construction tasks. Powered by a DeWALT 20V MAX battery system with lithium-ion technology.

For comfortable use, the manufacturer has provided soft rubber pads on the handles.

Characteristics:

  • cartridge diameter - 1.5-13 mm;
  • number of beats per minute - 38,250, revolutions - 2,250;
  • torque - 95 Nm;
  • power - 0.82 kW;
  • hole diameter on wood - 55 mm, metal - 15 mm;
  • battery capacity - 5 Ah, voltage - 18 V, charging time - 1 hour;
  • there is a lamp, button lock on, reverse, spindle lock;
  • Includes 2 batteries, charger, second handle, case;
  • dimensions - 21.3x20.8 cm;
  • weight - 2.13 kg.

Advantages:

  • excellent power;
  • three speeds plus reverse;
  • work with any materials;
  • cartridge retainer;
  • long lasting batteries;
  • stable work;
  • continuous process on one charge.

Flaws:

  • weak battery fastening.

Comparison table of home screwdrivers

The following table will help you choose the best tool for your home:

ModelTypeMaximum torqueChuck diameterMax. idle speed progress CapacityWeightPrice
NmmmrpmAhkgrub.
Hammer ACD185Liacc311012501.52.66500
Makita DF331DWYEacc30from 1 to 1017001.51.16800
BLACK+DECKER BDCHD18KBacc401014001.51.67000
Hitachi DS18DVF3acc451312001.428500
DeWalt DW263Kset151025001.312000
Bosch GSR 6-25 TE 2011 Caseset206.3525001.513000
Metabo PowerMaxx BS 2014 Basicacc34from 1 to 10140020.85300
BOSCH GSR 12V-15 FC 2.0Ah x2 L-BOXXacc30from 1 to 10130020.815350
STANLEY SCD20S2Kacc45from 1 to 1315001.51.66500
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]