Makita screwdrivers: TOP-14 rating of cordless and corded models of 2021

Rating of the TOP 14 best Makita screwdrivers

Place	Model	Price
The best inexpensive models with torque up to 30 Nm
#1	Makita DF333DWYE4, 12 V, 1.5 Ah x2, case, bit set
#2	Makita DF347DWE Li-Ion 1.5 Ah 14.4 V x 2 case
#3	Makita DF330DWE
#4	Makita HP333DWME Li-Ion 4.0 Ah 10.8 V x2 case
The best Makita screwdrivers with torque from 31 to 60 Nm
#1	Makita DF457DWE Li-Ion 1.5 Ah 18 V x 2 case
#2	Makita DDF485RF Li-Ion 3 Ah 18 V x 1 case
#3	Makita DDF453RFE
#4	Makita DHP485SYE
The best models with torque from 61 Nm
#1	Makita DDF481RF Li-Ion 3.0 Ah 18 V x 1 case
#2	Makita DDF482Z, without battery
#3	Makita DDF481RTE Li-Ion 5 Ah 18 V x 2 case
#4	Makita DDF481Z, without battery
The best network models
#1	Makita DF0300, box, 320 W
#2	Makita FS4000, 570 W

Page navigation:

What features of Makita drills and screwdrivers should you pay attention to when choosing?

For your information! When deciding to purchase a drill/driver from a well-known brand, the buyer should pay attention to the following points:

Purpose. If the tool will be used almost daily, then only professional models should be considered.
Rotational speed. It is directly proportional to the power of the device; for domestic needs, 400-500 rpm is enough, for professional needs - more than 1000.
Nutrition. For your home, it is better to choose a model that runs on mains power.
Cartridge. The quick-release chuck is easier to maintain and better suited for home use.
Reverse function. A nice addition that will make the repair process easier.

The best inexpensive models with torque up to 30 Nm

Such models are suitable for light housework and simple repairs. Ideal for furniture assembly.

Review and rating of the best Makita cordless screwdrivers with a minimum torque of up to 30 Newtons.

Makita DF333DWYE4, 12 V, 1.5 Ah x2, case, bit set

The Makita DF333DWYE4 model is ideal for assembling furniture and performing finishing work both in open and closed spaces.

The built-in backlight will help you perform work more accurately and efficiently in places where there is insufficient lighting.

Everything is designed so that it turns off 10 seconds after the trigger switch is released.

The quick-release chuck increases ease of use - it can be easily unfastened.

Now more precise settings - 2 speeds and 18 torque levels for contact with even the most difficult materials.

Specifications:

cartridge diameter: 0.8 – 10 mm;
maximum possible speed: 1700 rpm;
battery capacity: 1.5 Ah;
battery: Makita 12V max CXT;
voltage: 12 V;
weight: 1.1 kg.

Advantages

convenient case;
compactness and light weight;
convenient to work;
very low price compared to competitors;
There is enough power for a home.

Flaws

“head hits”;
quite a large number of defects in batches;
The cartridge often unwinds.

Makita DF347DWE Li-Ion 1.5 Ah 14.4 V x 2 case

There is a choice between two speeds; a special slider is installed for greater convenience.

You can operate the Makita DF347DWE device with one hand, since all the switches are concentrated in one place.

The torque is set in one and 16 provided stages. The ergonomic body makes the handle as comfortable as possible for holding.

The kit includes two batteries and a charger. Protection against accidental starting is provided - power-on blocking.

Lightness and compactness make the screwdriver more mobile and comfortable to use.

Specifications:

cartridge diameter: 0.8 – 10 mm;
maximum possible speed: 1400 rpm;
battery capacity: 1.5 Ah;
battery: Li-Ion (G series);
voltage: 14.4 V;
weight: 1.4 kg.

Advantages

versatility for household use;
comfortable handle;
smoothness and power;
comfortable weight;
The battery holds a charge for a long time.

Flaws

the cartridge often unwinds;
after a short time the gearbox begins to crack;
no flashlight.

Makita DF330DWE

The built-in flashlight will illuminate places with a lack of lighting. The reverse function allows you not only to screw in screws, but also to unscrew them back without additional tools.

You can comfortably adjust the speed and torque limiter to suit your own needs.

Speed also depends on how hard you pull the trigger.

Absolute ergonomics of the case - rubber lining and the most comfortable case for work.

The quick-release chuck makes changing accessories as easy as possible. There are 18 torque limiting modes.

Specifications:

cartridge diameter: 0.8 – 10 mm;
maximum possible speed: 1300 rpm;
battery capacity: 1.5 Ah;
battery: Li-Ion (G series);
voltage: 10.8 V;
weight: 1 kg.

Advantages

high-quality assembly;
fast battery charging;
good equipment;
quite good power, considering the compactness and light weight of the model;
high ergonomics.

Flaws

lack of charge indicator;
cartridge play;
the cartridge is quite short.

Makita HP333DWME Li-Ion 4.0 Ah 10.8 V x2 case

The keyless chuck makes changing the chuck as quick and easy as possible. An ergonomic handle with rubber inserts makes the working process more comfortable.

Lithium-ion technology significantly increases the service life of the device and allows you to recharge the screwdriver regardless of its discharge level.

If necessary, you can instantly stop the rotation of the chuck using a dynamic brake.

A reverse function is provided.

Now you can work even in poor lighting with the help of a special flashlight attached to the device.

Specifications:

cartridge diameter: 0.8 – 10 mm;
maximum possible speed: 1700 rpm;
battery capacity: 4 Ah;
battery: Makita 12V max CXT;
voltage: 10.8 V;
weight: 1.2 kg.

Advantages

high battery capacity;
light weight and compactness;
many additional functions;
there is a flashlight;
quite attractive price compared to competitors.

Flaws

rather weak model in terms of power;
the cartridge is quite short;
cartridge play.

The best Makita screwdrivers with torque from 31 to 60 Nm

Models that are characterized by greater power and 18 volt battery voltage , and are suitable for a greater number of tasks. They even cope with professional needs.

Makita DF457DWE Li-Ion 1.5 Ah 18 V x 2 case

The ability to easily change equipment due to the quick-release chuck - you can make the change even with one hand without additional effort.

The tool lasts much longer thanks to a high-quality gearbox with metal gears and professional protection from dust and other contaminants that can disrupt the operation of the screwdriver.

The comfortable grip of the handle, equipped with rubber inserts, increases the level of comfort during use and overall ergonomics.

It also helps reduce human fatigue while working with the tool.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 1400 rpm;
battery capacity: 1.5 Ah;
battery: Makita 12V max CXT;
voltage: 18 V;
weight: 1.7 kg.

Advantages

impressive power;
compact and quite mobile;
charges quickly;
convenient case;
ease of use.

Flaws

overcharge;
during operation the cartridge unwinds;
you can find cheaper and higher quality analogues.

Makita DDF485RF Li-Ion 3 Ah 18 V x 1 case

Quick and easy replacement of the chuck using its quick-release mechanism, now you can do it with one hand and without the help of additional tools.

The tightening force can be adjusted in up to 21 steps, which greatly increases the accuracy and quality of work.

All control buttons are located in one place, it is intuitively clear where to press to perform a particular function.

There is a built-in backlight that allows you to work even in the darkest places without additional equipment.

The ergonomic handle fits comfortably in the palm, thanks to the rubberized handle.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 1900 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.1 kg.

Advantages

light weight, but decent power;
quite attractive price;
presence of a brushless motor;
fast and comfortable work;
ease of use.

Flaws

the cartridge often unwinds;
lack of charge indicator;
cartridge play.

Makita DDF453RFE

The quick-clamp installation principle allows you to instantly change the equipment with one hand, without the use of additional equipment, which significantly saves time and effort.

Using a rotary coupling, you can quickly and conveniently change the operating mode and torque.

A cooling system for the entire system is provided to increase overall service life.

There are a large number of different functions that improve the quality of the screwdriver, for example, reverse.

The comfortable and practical rubber-coated handle does not slip during operation and improves overall ergonomics.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 1300 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.8 kg.

Advantages

The battery lasts for a long time;
quite powerful work;
very easy to use;
high-quality assembly;
two batteries included.

Flaws

quite heavy;
the second speed sometimes acts up;
absolutely not mobile.

Makita DHP485SYE

The battery is fully protected from any type of overload - current, overheating, and so on. This helps to significantly increase service life.

All switches are concentrated in one place so that you can operate the tool more comfortably without spending additional time or effort.

There is a built-in flashlight that allows you to work even in poor lighting.

You can choose any operating mode, each of which is suitable for a specific material - this greatly simplifies the entire work process.

A high level of protection against dust and various types of dirt increases the service life of the tool.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 1900 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.7 kg.

Advantages

high build quality;
versatility - suitable for many jobs;
quite high power;
attractive price;
compact model.

Flaws

rather inconvenient weight;
not quite mobile;
promotion of the cartridge.

The best models with torque from 61 Nm

Such models are ideal for professional work and people who use the tool on a daily basis.

Makita DDF481RF Li-Ion 3.0 Ah 18 V x 1 case

A powerful device for tough jobs at home and outside.

It is in great demand among ice fishing enthusiasts due to its impressive power even on ice.

The model has a brushless motor, which significantly increases wear resistance because the brushes no longer require replacement.

Incredibly quick change of equipment due to the quick-release chuck; changing can now be done with just one hand, without all sorts of additional tools.

The torque control clutch allows complete control of the tightening torque.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 2100 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

incredible power;
ease of use;
the presence of a long additional handle;
functional and comfortable case;
quite low price.

Flaws

heavy device;
not mobile enough;
takes up a lot of space.

Makita DDF482Z, without battery

The main control buttons are located in one place, which allows you to switch modes and settings without being distracted from your work.

There are two modes for optimal selection of speed and torque depending on the purpose of using the screwdriver.

Wide range of torque adjustment for more precise and comfortable control.

There is a built-in flashlight that allows you to work comfortably even in darkened rooms without the use of additional equipment.

Specifications:

cartridge diameter: 1.5 – 13 mm;
maximum possible speed: 2100 rpm;
battery capacity: 3 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.5 kg.

Advantages

high power;
high-quality assembly;
compact;
convenient and practical case;
good speed.

Flaws

quite heavy;
heats up during operation;
there is some play in the cartridge.

Makita DDF481RTE Li-Ion 5 Ah 18 V x 2 case

Provides greater protection from moisture, dust and surrounding dirt to ensure longer service life.

To cope with the torque there is an additional extended handle.

A two-speed gearbox is inserted, the settings of which can be extremely conveniently changed directly during use, with metal gears that increase the service life of the screwdriver.

Built-in flashlight for more comfortable work in dark areas.

Specifications:

chuck diameter: 13 mm;
maximum possible speed: 2100 rpm;
battery capacity: 5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

impressive power;
holds a charge for a long time;
two batteries included;
presence of a built-in flashlight;
good revs in second gear.

Flaws

the fastening on the handle for the stop is unreliable;
quite heavy;
overcharge.

Makita DDF481Z, without battery

The main control buttons are concentrated in one place - on the top of the ergonomic and comfortable handle.

The presence of two speed modes for choosing the most successful ratio of speed and torque allows you to do better and more accurate work.

Quick and extremely simple change of equipment due to the quick-release chuck - now this can be done with one hand, almost without interrupting your work.

The built-in bit holder is mounted into a ridge on the base, saving time and keeping everything in one place.

Specifications:

chuck diameter: 13 mm;
maximum possible speed: 2100 rpm;
battery capacity: 5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 2.6 kg.

Advantages

the highest torque in the entire market;
incredible power;
presence of a flashlight;
steel cartridge;
reliable and durable tool.

Flaws

the spindle locking when tightening the chuck is done extremely poorly;
noisier than competitors;
heavy construction.

The best network models

Such models are perfect for home work, when it is possible to connect the device to the network .

Makita DF0300, box, 320 W

The model is suitable for assembling furniture and small housework.

The tool has an extremely easy-to-use body and a handle with rubber inserts that ensure ergonomics.

Quickly change equipment using a quick-release chuck - now replacement can be done without additional tools, using only one hand.

More precise adjustment is provided by 2 speeds and 20 gradations of torque, which can be selected depending on the type of work and the material of the product on which the action is performed.

Specifications:

cartridge diameter: 1 – 10 mm;
maximum possible speed: 1500 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.2 kg.

Advantages

can work all day;
good torque;
fits comfortably in the hand;
well balanced;
compact and lightweight.

Flaws

heats up during operation;
the nozzle periodically falls out;
no shaft blocking.

Makita FS4000, 570 W

The model is mainly intended for unscrewing and tightening screws and self-tapping screws in household repairs.

There is a depth limiter that allows you to more accurately control the process of inserting the screw without damaging the material.

The tool has a clip so that it can be comfortably attached to your belt and always kept at hand.

The soft pad on the handle ensures a reliable and comfortable grip of the screwdriver. There are also a large number of convenient switches on the case and a separate reverse switch.

Specifications:

cartridge diameter: 1 – 10 mm;
maximum possible speed: 4000 rpm;
battery capacity: 1.5 Ah;
battery: Makita 18V LXT;
voltage: 18 V;
weight: 1.3 kg.

Advantages

light weight;
compactness;
sufficient power for domestic needs;
ergonomics;
convenient to use.

Flaws

not suitable for heavy work;
lack of a flashlight;
a small number of additional functions.

How to spot a fake

We recommend purchasing original Makita tools here

The original product is equipped with a lithium-ion battery with a marking sticker. One screw will be sealed, high-current elements are supplied by Sony or LG, the battery power is 10.8 volts and the capacity is 1.5 Amperes per hour.

The Chinese fake is equipped with a battery of a different power, and there are no stickers on it. Counterfeit batteries resemble batteries for household flashlights.

The original has a charge indicator, the indicator can be seen after pressing the button. The battery fits well and installation is easy.

The appearance of the fake product, at first glance, differs little from the original, but there are some small features:

The body color has a bluish rather than greenish tint.
The color of the force adjustment scale is gray, not black.
Double coupling cartridge.

The counterfeit handle is made of hard plastic, while the original handle has rubber inserts that increase ease of use and anti-vibration properties.
The original pen has a number on it that is not on the fake.
The original power cable is made of flexible and durable rubber, the parts are well secured, and the plug has a characteristic “expensive” look.
A tag with information about the product is stuck on the fake, and on the original the serial number is stamped with the obligatory indication of the production date.

The hook for attaching to the belt on the fake is installed only on one side, but on the original it is provided for fastening on both sides.