TOP 10 best motor drills - advantages and disadvantages of the tool

Motor drills are used to quickly drill small holes in the soil or ice. They are powered by gasoline engines. Through the gearbox, the torque will be transmitted to the auger, which simultaneously makes a hole and throws up earth or ice.

There are products from many domestic and foreign manufacturers on the market. Expert advice makes it possible to make the right choice when purchasing a quality device. To choose the best motorized drill in 2021, this rating was compiled, which included the best products.

What to look for when choosing a motor drill

Just in case, learn more about how such equipment differs.
Power. This parameter depends on the characteristics of the engine and, first of all, on its volume. Low-power motor drills allow you to make holes with a diameter of no more than 30 cm with a depth of 200 cm. To obtain a deep hole with a larger diameter, you will need equipment that develops at least 7-8 hp; for solving everyday problems, a device with a power of up to 3 hp is suitable.

Well dimensions. The standard length of the auger is 600-800 cm, so to obtain deeper holes you will need additional equipment: an extension and a tripod. High-performance devices allow you to install an auger with a diameter of 300-600 cm.

Replacement equipment . The auger is a working tool, so the capabilities of the walk-behind tractor depend on its parameters. The kit includes replaceable nozzles with a diameter of 10, 15 and 20 cm.

Ergonomics . The weight of the device, configuration and material of the handles determine the ease of use of the equipment. If the weight is 30-45 kg, then it will be difficult for one person to work without an assistant. The most successful choice would be equipment with soft, conveniently located handles, equipped with rubber pads, and also providing a vibration damping system, reverse and brake.

Exploitation
What gear to choose for successful ice fishing

When choosing a motor drill for excavation work, you should pay attention to the power, weight, dimensions of the auger and fuel tank capacity. In addition, you should not forget about the characteristics of the soils in which you will have to work: for clayey soils you need a more powerful model.

If you're looking for the best power drill for ice fishing, you need to consider weight, performance, and maintenance. In this case, it is recommended to pay attention to universal equipment, which is suitable not only for making holes in the ice, but also for performing work in the summer.

Auger - which one to choose for drilling ice in winter

The auger is the main part that determines the purpose of the motor drill. In ice screws, the auger blades have a sharper angle of inclination. Can also be coated with Teflon to improve glide. On a winter ice auger, you can remove the blades to replace or sharpen them. The diameter of the resulting hole with an ice auger can be from 100 to 500 millimeters. The depth the drill can drill depends on the length of the auger. This is no more than 1.5 meters.

Auger for motorized ice drill - suitable for winter fishing

What is it needed for?

A motor drill (gasoline drill) greatly simplifies and speeds up the drilling of small wells: up to 1500 mm in depth and up to 200 mm in diameter.

The purpose of these wells can be very different:

Recessing fence posts.
Installation of a columnar foundation, lightning rod, flagpole or lighting pole.
Strengthening the foundation.

Preventing the collapse of pits or erosion of coastlines.
Geological exploration work.

Design Features

The motor has an extremely simple design, which includes 4 elements:

Gasoline engine (two- or four-stroke with power from 2 to 8 hp, started using a recoil starter).
Gearbox (using a worm or cylindrical gear, transmits force from the motor shaft to the auger, increases torque, and also takes on the risk of breakage if the drill gets stuck).
Auger (drill in the form of a screw rod).
Handles (two horseshoe-shaped, symmetrically located).

The operating principle of a gas drill is similar to that of a conventional mechanical drill. After starting the motor, the operator, holding the auger in a vertical position, gradually immerses it into the soil. As it goes deeper, the auger selects the ground using the principle of a screw conveyor. In this case, the operator requires serious physical effort to press the device into the contact surface and hold it in a given position.

Operating rules

The main rule is to use high-quality augers that are suitable in diameter for the type of soil. If this is overlooked, damage to the device or harm to the health of the operator may occur. To make the start of the unit smooth and safe, manufacturers equip their creations with a special system called easy start. It helps to warm up the drill in 3–4 minutes using idle speed.

Before you begin excavation work, you need to clear the area of debris, foreign objects and stones that may interfere with drilling. The main point is the correct installation of the drill. It must stand stable. The rotating auger must be at a “respectful” distance from the operator. The device must be held with both hands.

The easiest way is to drill through ice. But manipulations should be carried out very carefully. Otherwise, cracks may appear and a dangerous situation may arise. Drilling holes in the soil involves regularly lifting the auger out of the hole. This will allow you to remove the chipped layers so that jamming does not occur. If an emergency situation occurs, it is worth opening the inertial clutch circuit, having first fully released the gas. This will help avoid injury.

It is strictly forbidden to drill holes deeper than the length of the drill. If such a need arises, it is worth purchasing an additional extension cord. The fuel for the operation of the structure is a substance consisting of oil and gasoline. Moreover, the ratio can be 1 to 50 or 1 to 40. To break in the engine, a substance with an oil to gasoline ratio of 1 to 25 is suitable.

There are two types of gearboxes: worm and coaxial. The space between the gearbox and the motor is occupied by the clutch. During operation, you must pay close attention to the operation of the knives. They have a direct impact on engine and clutch wear. Models with a coaxial gearbox are suitable for work by one operator. Worm worm devices can only be handled by two people.

Gasoline drills are not very suitable for drilling ice. Low temperatures negatively affect the performance of the structure, which can lead to premature failure. For such purposes it is better to use hand drills. They are more practical and reliable.

Kinds

Motor drills are classified by size:

Lightweight (weighing up to 30 kg). Designed for making shallow wells in loose soil (sand, sandy loam, peat). Typically, they are equipped with an economical two-stroke motor and an auger of up to 150 mm. Thanks to their compact size and comfortable handles, such devices can be easily operated by one person. Speed adjustment is not provided on most light drills as it is unnecessary.
Heavy (up to 80 kg). As a rule, these are two-seat motor drills (with symmetrical handles for 2 operators) with a powerful four-stroke engine, an extended auger and a multi-stage gearbox. These devices are suitable for working with alumina, chernozem and other heavy soils.

Expert opinion Dmitry Konstantinovich Levin Separately, it is necessary to say about heavy drills equipped with a reaction rod to dampen vibration. Despite its impressive dimensions, such a tool can be easily operated by one person. However, due to the high cost, such instruments are extremely rare on sale.

Unit care

Working with a motor drill is easy and simple. There is no need to acquire relevant knowledge and gain experience. To extend the service life of the device, it is necessary to control the level of the tip of the knives (auger). This will help prevent premature failure of the gearbox and clutch. After excavation work, the device should be cleaned of dirt. The storage area must be dry.

Advantages and disadvantages

Compared to mechanical or electric tools, a motor drill has several advantages:

Maximum drilling speed due to high motor power.
Less physical effort is required than when working with a hand drill.
Unlike a power tool, a gas drill does not depend on the availability of an electrical power supply.

Does not require additional equipment.
Removable screws allow you to vary the diameter and depth of the hole.

The disadvantages of the tool include the relatively high cost, noise during operation and the constant costs of purchasing fuel and lubricants.

How to work with a motor drill correctly

Before drilling with a motor drill, you need to study the instructions for use and only then begin work. For effective use, you need to follow certain rules, no matter if the drill is used for installing poles or other work:

Use augers that are suitable in quality and diameter for the intended drilling location.
Hold the device firmly in your hands, do not touch the rotating elements.
A drill weighing 10 kg or more must be operated by two people.
Before drilling, the area where work is being carried out must be cleared. When rhizomes or stones are found in the well, you need to remove them by hand.
Don't neglect guidance. The fuel must be mixed in the proportion specified in the product data sheet, otherwise the engine will quickly break down.
Before storing the tool, it must be drained of fuel.

How to choose: main criteria

When choosing a tool, the buyer should focus on the following aspects:

Purpose . In addition to excavation work, a motor drill is often used as an ice drill for winter fishing. Therefore, when purchasing, it is important not to confuse these two tools: a motorized earth drill is more powerful and larger, the blades on its auger are located more often and are curled at a flatter angle.
Engine . 4-stroke engines are more economical, quieter and emit less smoke (due to the fact that gasoline and oil are not mixed in the same tank). In addition, they have more power, but are also more expensive. Therefore, in order to save money, a 2-stroke engine is suitable for solving simple problems; in other cases, a 4-stroke engine is preferable.
Motor power . The higher the power, the wider the hole the device can drill. The dependence of the screw diameter on the motor volume is presented in the table:

Engine volume, cm3	Screw diameter, mm
45	150
55	200
65	250
75	300

Auger . When choosing a screw, you need to take into account its mounting diameter (20 or 32 mm), which may vary depending on the manufacturer. If necessary, you can use a special adapter. The most popular screw diameters are 100, 150 and 200 mm. You should also pay attention to the possibility of replacing blades. If the turns are welded to the shaft, then if one of them is damaged, the entire screw will have to be replaced.
Extension rod . The length of most drills varies from 600 to 800 cm. For a deep well, you need to purchase extensions (500-600 mm).
Handles . It is desirable that they be soft and ergonomic.
Fuel tank . It must be spacious enough (up to 2 liters) and with a comfortable neck, otherwise the entire instrument will be flooded with gasoline.
Additional options: Fast braking system (saves the gearbox from damage when jammed).
Reverse motion (helps to remove the drill).
Damper spring (dampers vibration, reduces the consequences of jamming).

Motor drill engine for fishing in winter

Engines of different types of drills differ in type and characteristics. Electric ones are used in construction, as they are designed to work in warm conditions. Gasoline ones can be found in both construction and fishing industries. They have different not only operating conditions, but also power. To drill soil or earth, you need 6-8 horsepower, while a fishing drill for drilling holes needs 2-3.5. Also, even a gasoline construction motor drill can perform poorly in winter fishing, because it is not designed for use in severe frost.

Gasoline motor drill without winter auger

Rating TOP 10 best motorized drills

Before compiling a list of the most functional motor drills, a market analysis of the best devices was carried out. In the list, users have the opportunity to compare the highest quality products, study their key characteristics and choose the appropriate device. The top motorized drills look like this:

Maxcut MC 55

A powerful device that is capable of drilling earthen soil, as well as ice. The product rotates at a speed of 6500 rpm. Only one person can operate it; there is no handle for the second. The design includes a gas fuse to prevent sudden start-up. There is a fuel pump that pumps gasoline into the carburetor so that the drill starts easily. In particular, this is important after a long period of inactivity, when the device has been sitting for 2 weeks.

Each control is located near the right handle. The keys can be reached with your finger. The handles themselves are grooved to make them comfortable to hold. The fuel tank allows light to pass through, so you can see how much gasoline remains. A characteristic feature will be the presence of an anti-vibration system that ensures operator comfort during the production process. To ensure better starting conditions at low temperatures, the motorized drill is equipped with a pump for preliminary supply of gasoline. The engine is closed with an air filter, which prolongs its service life.

power, kWt	2.2
Fuel type	Gasoline and oil
Fuel tank volume, l	1.3
Drilling surface	Ground, ice
Design Features	Shock-absorbing handle pads, two-stroke engine, anti-vibration system

anti-vibration system;
build quality;
ease of use;
powerful engine;
sudden start blocking;
The kit includes a spark plug wrench.

the motor releases oil onto the housing.

I’ve been using it for a year, drilling 2 small wells of 7 m each. It copes with its tasks optimally. The assembly is quite high quality, there are comfortable rubberized handles. There is enough power on wet clay. I am completely satisfied with the choice I made.

Elitech BM 70V

A professional gas drill that has good power and can easily cope with drilling various holes with a diameter of 40-300 mm. The device is easy to use and is intended for use by one operator. At the same time, the design of the handles will allow you to work in pairs if necessary. This is extremely convenient, in particular when carrying out excavation work in very dense or frozen soil. The product is extremely effective during ice fishing, since it provides the owner with holes of the required size and in the required quantity in the shortest possible time.

Fuel consumption is approximately 0.8 l/hour, while the tank capacity is 1.4 l, which is enough for long hours of work. To ensure maximum operator safety, a sudden start blocking option is provided. The motor drill enters the ground quite easily, in particular when using a small-diameter auger, and starts up quickly.

power, kWt	2.44
Fuel type	Gasoline and oil
Fuel tank volume, l	1.4
Drilling surface	Ground, ice
Design Features	Anti-start function, two-stroke engine, anti-vibration system

high power;
build quality;
blocking accidental launch;
low vibration;
ease of use;
nice design.

The kick starter does not turn completely.

Excellent device, very helpful when installing a fence. With such a motor drill, holes for pillars are drilled in a matter of minutes. I will also note the convenient location of the controls. There were no complaints during use. Happy with the purchase.

ADA instruments Ground Drill 8

Convenient professional motor drill with a special frame design. Intended for the construction of fences, lighting poles, gardening, digging wells and foundations. Used for making holes up to 300 mm in diameter. The special design of the frame is intended for work by one or two people. When working on light soil, one operator is sufficient, but on heavy soil or when drilling wells more than 1 m, the help of a second person will be required. In addition, this design helps to effectively distribute the load.

The frame also acts as protection for the motor from mechanical damage. Even in the event of a sudden fall, the engine cannot be damaged; it is protected on each side by steel arches. The compact dimensions of the frame make it possible to easily place the drill in the trunk of a car. The special design of the gas lever allows you to comfortably work alone or in pairs. Throttle grips make it possible to control the engine regardless of the number of operators and grip.

power, kWt	2.4
Fuel type	Gasoline and oil
Fuel tank volume, l	1.2
Drilling surface	Priming
Design Features	Rubberized frame, two-stroke engine, protective steel bars

powerful motor;
relatively easy start;
comfortable handles;
nice design;
compact dimensions;
build quality;
convenient refueling.

flimsy throttle grips.

High quality motor drill. After purchasing the product, I filled the gearbox with lubricant and immediately tried it. I made holes for the fence of the area. Functions properly, without failures. Starts up very quickly. I am completely satisfied with the choice I made.

Champion AG252

Functional motor drill for earthworks, which is equipped with a 1.46 kW engine with a volume of 51.7 cubic meters. cm. The device is compact in size and has a fuel tank of 0.98 liters. The design works with drills with a diameter of 60-250 mm. Each element of the device is fixed on the frame. To start the motor drill, a cable is provided, and a trigger-shaped gas lever is located on the handle. An integrated shock absorber reduces the load.

The set includes an auger, gloves and safety glasses. The motor drill in question has comfortable handles, all the main elements are under the right hand. The developer points to a low noise level and an anti-vibration system. The motor drill can be used at an angle. The product starts even at sub-zero temperatures. The popularity of the device is determined by the possibility of long-term continuous operation and durability of the design.

power, kWt	1.46
Fuel type	Gasoline and oil
Fuel tank volume, l	0.98
Drilling surface	Priming
Design Features	Auger included, built-in shock absorber, gloves, safety glasses, anti-vibration system

long service life;
ease of launch;
convenient carburetor adjustment;
motor overheat protection;
rubber lining on the handles;
increased power.

strong noise and vibration.

I chose this model after reading reviews online. I would like to note that the augers in this motorized drill are quite effective. I have used other models before, but they are inferior in performance. The controls are conveniently located. I recommend to buy.

When purchasing a motor drill, you should pay attention to the shaft extensions, which are necessary for deep holes. The usual length of the auger is 1-1.5 m, and when an extension is placed between it and the gearbox shaft, the drilling depth triples. They must be purchased separately. It is important to remember that the diameters of the gearbox shaft, extension and auger must be compatible.

Elitech BM 52E

A convenient motor drill, which is designed to perform tasks of drilling holes in hard and soft ground, in ice. It can also be useful when planting trees and when installing various poles. The device is equipped with a standard 2-stroke motor, its power is sufficient for drilling ice. The advantages of the device include a standard connector, which makes it possible to use screws of different diameters. The gasoline engine provides powerful torque. Due to its light weight, it can be easily moved across a frozen body of water.

The controls are located on one handle for comfortable operation regulation. The device is intended for use by one person. The metal frame helps to evenly distribute the center of gravity during the drilling process. The basic configuration includes a drill with a diameter of 20 cm, the maximum drilling depth is 1.8 m. In addition to the standard fuel canister and funnel, the kit includes a set of tools useful when servicing the motor drill.

power, kWt	1.85
Fuel type	Gasoline and oil
Fuel tank volume, l	1.2
Drilling surface	Ground, ice
Design Features	Single cylinder engine, gear reducer, adjustable carburetor, fuel mixture canister

light weight;
ease of launch;
high power;
ease of drilling soil and clay;
nice design;
compact dimensions.

The gas handle is poorly fixed.

I bought it for my dacha. I dug holes for fence posts without difficulty. Also used for planting seedlings. I think I could spend a whole day with a shovel. Finished it in less than an hour. Quite a convenient tool. I recommend it.

ADA instruments Ground Drill 7

A convenient motor drill that has average power. Suitable for excavation work that requires more effort. It is equipped with a 2-stroke engine, which implies ease of design and maintenance, and the absence of a bulky lubrication and gas distribution system. The engine is air-cooled for long-term operation without overheating.

To make holes of different diameters, replaceable screws are used. The drill is replaced using a quick-release connection. It is possible to increase the drilling depth using special extension rods. Each control is located on one handle for comfortable drilling control. The advantage of the product will be its autonomy of operation and independence from the length of the electrical cable.

power, kWt	2.4
Fuel type	Gasoline and oil
Fuel tank volume, l	1.2
Drilling surface	Priming
Design Features	Tool kit, air-cooled engine, stable handles

comfort of use;
ease of use;
auger included;
durable metal handles;
the ability to operate alone;
build quality;
light weight.

noise during operation.

Convenient tool. Starts up quickly enough even after a long period of inactivity. The motor always runs smoothly, no problems have arisen. The package includes a special bottle containing a mixture of gasoline and oil needed to operate the motor drill. There is also an auger, so there was no need to purchase one additionally. Everyone is happy.

Forward FEA-52/2600

A convenient tool that is equipped with an economical two-stroke productive motor with an easy start device. The device is intended for drilling holes in soil or ice with a diameter of up to 250 mm when using appropriate augers. The product is distinguished by its compact size. 2 comfortable rubberized handles guarantee a secure grip and reliable control over the device during operation. Chrome-plated cylinder walls help extend engine life.

The motor drill in question can be used to work alone and, thanks to the variable fastening of the handles, by two people. This tool can also be used for ice fishing as an ice drill. The device is easy to use and does not require special maintenance skills.

power, kWt	2.4
Fuel type	Gasoline and oil
Fuel tank volume, l	1.2
Drilling surface	Ground, ice
Design Features	Recoil starter, two-stroke engine, chrome-plated cylinder walls

reliable gearbox;
light weight;
powerful engine;
air cooling system;
comfortable handles;
chrome plated cylinder walls.

Unreliable throttle grips.

An indispensable assistant in dacha farming. Thanks to the tool, you can easily excavate soil for planting, install lighting poles and fencing. The best choice for this price.

Which motor drill to buy: 5 optimal models

Maxcut MS 55: for a small budget

Engine capacity - 55 cm³.
Power - 3 hp
Weight - 11.6 kg.
Connection diameter - 20 mm.
The maximum drill diameter is 300 mm.

The Maxcut MS 55 motor drill is inexpensive, but has a good design with shock-absorbing handle pads and can work even with medium drills (up to 30 mm in diameter). Not the lightest, but quite manageable for one operator. This makes it easy to make holes for fence posts or for planting trees. The fuel pre-priming pump makes starting easier in winter.

Although it is shown in the photo with an attachment, the drill is not actually included in the kit. In general, we can say that in terms of the combination of power and price, this is one of the optimal models - that’s why we added it to the rating of gas drills.

Huter GGD-52: compact dimensions

Engine capacity - 52 cm³.
Power - 1.9 hp.
Weight - 8.45 kg.
Connection diameter - 20 mm.
The maximum drill diameter is 300 mm.

The Huter GGD-52 motor drill weighs relatively little and easily fits into any trunk. So this is an excellent option both for working in a summer cottage and for winter fishing. The auger is driven by a two-stroke air-cooled internal combustion engine, which runs on AI-92 gasoline. The motor is equipped with a wear-resistant cylinder-piston group, which uses porous chromium plating technology, which significantly increases its service life. Judging by user reviews, the vibration during operation is not so strong, and besides, when the auger is heavily loaded, the speed of the weak engine does not drop. The fuel pump makes it easy to start the engine in cold weather - this is important for fishermen. You can work alone, holding the drill with both hands.

Although we haven't rated motorized excavation drills based on reliability, there aren't many complaints about this model.

ADA instruments Ground Drill 14 Reverse: user choice

Engine capacity - 172 cm³.
Power - 8.0 hp
Weight - 30.0 kg.
Connection diameter - 20 mm.
The maximum drill diameter is 600 mm.

Which is better to choose a motor drill for excavation work? For example, this one is professional grade, which allows you to work with augers with a diameter of up to 600 mm. The engine power is quite enough: 8 hp. The design of the gearbox shaft allows the installation of augers of various types: conventional augers with a 20 mm diameter and an increased diameter of 32 mm. Thanks to this, there is no need to use adapters.

Among motorized drills of equal power class, the ADA instruments Ground Drill 14 Reverse model has no equal - the equipment can be carried without the use of bulky wheeled carts by two operators. Only one hand is used to regulate the operating mode. Please note that the model can be sold without an auger - in this case it must be purchased separately.

Elitech BM 52E: optimal price/performance ratio

Engine capacity - 52 cm³.
Power - 2.5 hp.
Weight - 9.7 kg.
Connection diameter - 20 mm.
The maximum drill diameter is 200 mm.

Elitech BM 52E is a universal model of motor drill for drilling soft, hard and frozen soils, as well as ice. The frame has a design that allows one or two people to operate the device. 2.5 hp two-stroke gasoline engine. copes even when working in difficult soils. At the same time, the engine consumption is very moderate: 0.7 l/h. The design uses a gear reducer with a two-cam centrifugal clutch - it helps reduce shock loads on other structural elements and the operator’s hands. Maintenance of the unit involves periodically monitoring the lubricant level and adding it as needed.

Iron Mole Compact: hydraulics in action

Engine capacity - 212 cm³.
Power - 7.0 hp
Weight - 75.0 kg.
Connection diameter - 22 mm.
The maximum drill diameter is 350 mm.

Iron Mole Compact is the lightest and most compact hydraulic excavation drill in its class. An important difference from many other similar devices is the modular design. The station with the engine is made of one module, the auger itself with handles is made of another. This way, operators do not have to lift the heavy engine.

The motorized drill is driven by a four-stroke gasoline engine that develops a power of 7 hp. At the same time, the pressure in the hydraulic line can reach 200 bar. This allows even a large drill to work on such complex textures as loam or gravel. If the drill jams, the safety valve will operate, releasing excess pressure from the system.

The Iron Mole Compact's design is highly serviceable. All you need to do at first is change the oil and filter periodically. The main connections are easy to disassemble, so keeping the equipment clean will not be a problem.

We hope you can now choose the best motor drill for your home. By the way, if you do a lot of work yourself, it would be a good idea to get a folding workbench - it doesn’t take up much space, but it makes the work much easier.

The best motor drills for excavation work

In order for a gas drill to cope with any soil, the device must have a powerful motor. Since large holes are easier to make with two people, weight is not a key issue.

Fubag FPB 71

These devices are increasingly popular among domestic buyers. Recently, the number of views of the gas drill card has increased significantly.

The main attractive factor will be adequate cost. In addition, the gas drill is equipped with a high-quality 2-stroke engine. The model has universal qualities, suitable for drilling earth and drilling ice.

The product is inferior to analogues in the diameter of the holes (up to 25 cm) and the greatest depth of the holes (80 cm). A pleasant addition during operation will be the shock-absorbing lining of the handles. Buyers also note the light weight of this equipment (11 kg). The disadvantages include low-quality plastic and insufficient fastening of the tank lid.

Pros:

reasonable cost;
good performance;
shock-absorbing handles;
versatility.

Minuses:

low quality of plastic parts;
shallow hole depth.

ADA instruments Ground Drill 14 Reverse

The device in question is designed directly for professionals. Such a powerful device requires the coordinated work of 2 people, which is why it comes with 4 handles.

The motor-drill is equipped with a 4-stroke gasoline engine with good performance and little noise. The diameter of the hole in the soil is 60 cm. To prevent the equipment from getting stuck in the soil, the developer provides a reverse option. Due to the special design of the drive shaft, it is possible to attach standard augers (2 cm), as well as equipment with an increased landing size (3.2 cm), to the device.

Experts consider this device to be the best, despite its rather high cost. Buyers liked the technical performance of the gas drill, in contrast to the price of the device.

Pros:

increased productivity;
large hole diameter;
reverse;
4-stroke motor.

Minuses:

overpriced.

ELITECH BM 70V

This device has a number of important qualities. These include reasonable cost, good performance, and decent drilling depth. The 2-stroke engine consumes fuel economically (0.8 liters are burned per hour).

The diameter of the holes can be adjusted (change the auger 40-300 mm). The product is equipped with a standard 2 cm connection. The 10 kg device can be controlled by 1 or 2 people.

Experts highlight the gas drill at an acceptable cost and high-quality assembly. Regarding the minuses, buyers highlight the short spout of the muffler, drying out of the seals on the lids of the canister and tank.

Pros:

adequate cost;
easy start;
comfort in use;
high quality build.

Minuses:

design flaws;
fragility of seals.

Hitachi DA 300E

The best motor drills for excavation work. They can make holes even in frozen soil. The device is intended to be operated by 2 operators. The steel frame is made in the shape of a figure eight with square hinges.

The corners are covered with wide rubber pads that reduce vibration. Assembly requires strong pressure and rapid drilling. When carrying, the handles can be easily detached using screws on the body, which will reduce the size of the gas drill by 3 times.

Pros:

protected accelerator cable in a dense braid;
comfortable throttle trigger;
performance;
a capacious tank that will last for a long time;
screws can be installed with a diameter of up to 30 cm and a length of up to 200 cm;
endurance of the device, unpretentious to the conditions of use;
starts even at -20 degrees;
build quality;
Japanese motor.

Minuses:

high price;
there is no auger;
heavy weight;
gasoline and oil are mixed in certain proportions before refueling, otherwise the piston system will deteriorate;
there is no reverse;
an ill-conceived exhaust pipe assembly can direct the flow into your face.

Best lists

The review highlights the key technical parameters of motorized drills, highlights the advantages and disadvantages of the tools, and examines user responses. Let's study the best motor drills by category:

Most functional.
The most productive.
The most economical.

Let's explore the range in detail.

ADA instruments Ground Drill 7 - the most functional

Comfortable motor drill with average power. Suitable for excavation work requiring significant effort. Equipped with a 2-stroke engine, which is easy to design and maintain, and lacks a cumbersome lubrication and gas distribution system. The motor is air-cooled for long-term operation without overheating.

Replaceable screws are used to produce holes of various diameters. The drill is replaced using a quick-release connection. Increasing the drilling depth is possible using special extension rods. All controls are located on one handle for comfortable operation. The advantage of the device will be autonomy of use and independence from the cable length.

Elitech BM 70V – the most productive

A professional model with good performance and can easily cope with drilling various holes with a diameter of 40-300 mm. The device is easy to use and designed for use by one operator. At the same time, the design of the handles allows two people to work if necessary. This is very convenient, in particular when excavating in dense or frozen soil. The tool is very effective for ice fishing, as it makes holes of the required size and in the required quantity in the shortest possible time.

Fuel consumption will be approximately 0.8 l/hour, the tank capacity is 1.4 l, which is enough for long hours of work. To ensure maximum operator safety, a sudden start blocking function is provided. The device penetrates the soil quite easily, in particular when using small diameter augers, and starts up quickly.

Carver AG-52/000 – the most economical

A comfortable motor drill with a large tank (1.1 l) and good functionality. Designed for use by one person. The tank is transparent, it is possible to see the remaining fuel. Control parts are located on the right. The rubberized handles are wide; if necessary, you can work with a pair. The device is not too heavy, approximately 6 kg. The tool is sold without a screw, the operator can independently select the desired size. The cover is located near the starter; when starting the tool, there is a danger of injuring your fingers.

Suitable for household needs in the garden. Users advise buying more expensive spare parts for the device, which will make it possible to increase efficiency during operation and increase the durability of the device itself. A high-quality budget device that copes effectively with tasks.