Typical faults of Ardo washing machines

Instructions for ARDO Washing modes and times ARDO error codes

If you are interested in self-repair of Ardo washing machines, it means that the machine is broken and you would like to save on repairs.

While others urge you to call a professional, we can help you do the repairs yourself. To make it easier for you to understand everything, we will look at the main breakdowns, fault codes and provide detailed repair instructions.

ARDO WASHING MACHINE ON OUR WEBSITE. For free! The instructions can be downloaded or viewed online.

Typical and rare breakdowns of Ardo washing machines

Service center technicians claim that all faults in ARDO brands are divided into 2 types: typical and rare.

Typical. These are failures that are typical for all washing machines, not only the Ardo brand, but also any others. For example, in every machine the following problem can happen: water does not drain, it leaks, the drum is blocked, etc.

Rare. Such breakdowns are associated with the brand of the machine, and depend on the technologies used in the manufacture of the SM. These include a tank overfilled with water, insufficiently heated water, and others.

Attention! According to experts, in 9 out of 10 cases, Ardo washing machines with regular and vertical loading bother owners with typical breakdowns not related to production features. This once again proves that the ARDO technique is quite reliable.

Bearings are worn out – from RUB 4,600*

Bearings are responsible for the smooth rotation of the drum during operation of the machine. Due to vibrations, overloading of the washing machine with laundry, as well as prolonged use, the seal weakens and begins to leak water. This leads to corrosion and gradual destruction of the bearings.

SIGNS

The Ardo washing machine does not spin and at the same time makes a lot of noise and rattles, first during the spin cycle, and then during the wash cycle. The drum may be loose when you shake it by hand. When the bearings are completely destroyed, the drum falls down or “wedges”. If you disassemble the machine, rusty stains from the bearings will be visible on the tank. The breakdown may also be accompanied by code F6 on the display.

HOW TO FIX

Both bearings (external and internal) and the oil seal are replaced with new ones.

*Rates are only for the work of the master; new oil seals and bearings are paid separately.

Breakdowns typical for SM Ardo

A breakdown is usually indicated by a number of signs. By carefully studying them, you can recognize the failure. Therefore, it is better to start with an overview of the signs of breakdowns that occur most often:

• Water does not drain. This can happen for a number of reasons, including, mainly, blockage of the drain system, consisting of a pipe, a drain hose and a pump (drain pump). It is extremely rare that this problem occurs due to a failure of the temperature sensor.
• The water stopped heating. This is especially noticeable in high-temperature washing modes. You can tell that the water is not heating up by looking at cold laundry and unwashed stains on it. The failure of the heating element (heating element) causes breakdown. Limescale and scale slowly but surely destroy the part, causing it to burn out. The wasted resource of the part cannot be ruled out.
• The drum stopped spinning - it was stuck rooted to the spot. The design of Ardo washing machines is such that the drum is driven by a special belt. If the belt falls off the pulley or breaks, the tank stops spinning. In this case, you need to correct or replace the belt.
• Noise and “left” sounds - knocking, humming, rumble. If you hear them in operating mode, then the reason lies in the bearings. An object that has fallen into the tank often makes noise - a button, a coin, etc.
• Water leak. The cause of a dangerous breakdown is a violation in the pump or pipes. In the most severe case, you will need to replace the bearing and seals of the Ardo washing machine.
• Program crash. The machine does not start. All this is typical for a control module failure.

Don’t panic, you can often do without a specialist. Perhaps, having correctly identified the breakdown and its cause, you will be able to repair the washing machine yourself.

Basic faults

It is already difficult for a modern person to imagine his life without such an indispensable assistant in everyday life as a washing machine. While the equipment is working properly, we don’t even notice the convenience and comfort, and only when something bad happens to it, and we have to re-learn the forgotten skills of hand washing, the contrast between how it was and how it is is felt especially sharply. Let's try to figure out what the most common breakdowns of washing machines are, and also look at some ways everyone can fix them on their own.

The machine won't turn on at all

During washing the plugs are knocked out

The water does not heat up, the water does not flow into the machine at all, the water is drained at the beginning of the wash The washing machine is noisy, knocking or makes “unusual” sounds

Often this problem occurs when washing curtains that do not absorb water, but create foam. Too much of it is formed, and it leaks out through the technological holes in the system. The drum does not rotate

Frequent error codes for Ardo washing machines

Modern washing machines are complex devices with fault codes programmed into their microprocessors. They appear on the display whenever a fault occurs.

In the most common cases, Ardo brand SMs display the following error codes: E00, E01, E02, E03, F2, F4, F5, F13, F14.

The washing machine rattles when washing

There may be several reasons for this phenomenon:

1. The unit is installed skewed (checked using a building level).
2. The laundry load was too small, causing the weight to be distributed unevenly in the drum.
3. Drum bearings are damaged.

To replace these parts, the machine must be completely disassembled and the drum removed from the tank.

In the absence of a puller, the axle shaft can be knocked out of the bearing with careful blows of a hammer, but you need to hit not on the axle shaft itself (this can damage the threads), but on a placed board. The bearing itself can be knocked out of the cover using a blunt chisel and hammer. The blows must be applied evenly so that the bearing does not warp.

New bearings must be lubricated with lithol before pressing. Let us note once again that if you have no experience in metalworking, you should not take on this almost jewelry task.

We fix breakdowns of SM Ardo with our own hands

If the Ardo washing machine showed one of the listed errors, do-it-yourself repair is possible in almost all cases, except the last one. Although, it is still possible to flash an electronic module if you have certain skills and tools.

Removing blockages (E00, E01), replacing the pump (E03, F4) in Ardo machines

Having identified a breakdown, decide immediately - you will call the workshop or repair the SM yourself. Sometimes you really don’t need to pay a repairman, because the problem is easy to fix yourself. If we are talking about a blockage, then you can handle it without outside help.

The main location of blockages is in the drain filter. To clean it, proceed in this order:

• Locate the small hatch at the bottom of the front panel and open it. No hatch? Remove the panel.
• Place an absorbent rag on the floor to catch any remaining waste water.
• Turn the valve to the left to unscrew it.
• Pull the filter towards you and remove it from the hole.
• Rinse it under the tap, remove wound threads, hair and other debris.
• Reinstall the filter.

Difficulties may arise from the fact that debris often accumulates not only in the filter area, but also in other places in contact with waste dirty water: the drain hose, pump and pipes. To clean them, you need to disassemble the washing machine. If some small object gets stuck in the tank, the machine will also have to be disassembled.

Replacing and cleaning the pump (pump) is a more troublesome procedure, but quite realistic: you just need to be able to handle the tools in order to properly disassemble, and most importantly, assemble the machine.

How to disassemble an Ardo washing machine? You can get to the pump from the bottom (then the car needs to be placed on its side), or by removing the plastic strip. Cleaning the drain pump is shown in detail in this video:

If you decide that to troubleshoot the Ardo washing machine you need to clean the drain hose, proceed as follows:

1. Remove one end of the hose from the sewer pipe.
2. Unhook the other end from the pipe connecting the hose to the pump.
3. Take a flexible cable with a small brush at the end (usually this is used to clean bottles).
4. After cleaning the hose mechanically, rinse it under the tap.
5. Reinstall the hose in reverse order.

Electronics repair in Ardo washing machines (F2, F13, F14)

Speaking about replacing the control board, we cannot say that it is too difficult - this is a repair of average complexity. The main problem is that you cannot always be completely sure that the entire module needs to be replaced. Often, to return the SM to working order, you just need to repair the board.

Don’t forget that the module is expensive, sometimes up to 1/3 the cost of a new washing machine. Often, when the board is completely broken, owners of Ardo washing machines decide not to suffer and buy a new SMA.

Repair is so specific that it is not enough to know how to handle a tool; knowledge in the field of electronics will not interfere. The specialist knows 100% better what to do if the module breaks down. Don’t risk an expensive part, find a good craftsman instead.

Important! There were cases when home craftsmen changed the module with their own hands, with disastrous results: after connecting all the sensors and contacts, the new module burned out.

Replacing bearings yourself

We will talk about the most difficult type of repair: replacing bearings and seals. In this case, you need to completely disassemble the machine, take out the drum and, with some difficulty, remove the old bearings. Tools and experience are required.

If you decide to try your luck and remove the bearings yourself and install new ones, this video will help you:

Replacing the heating element (F2) in an Ardo machine with your own hands

If the washing machine has stopped heating the water because the heating element has already exhausted its service life or is overgrown with scale and burnt out, we will replace it.

Buy a new heating element that suits your Ardo washing machine model (A 800, A 600, A 1000 x, AE 833, TL 800 EX and others) and proceed according to this scheme:

• Unscrew the back cover of the case.
• Arm yourself with a tester and check if there is voltage at the contacts of the thermoelectric heater. You will quickly find it - the shank of the element sticks out at the bottom of the tank (when checking, turn the SM into heating mode).
• If there is no power, check the temperature sensor. Carry out two checks: at normal temperature and after heating (rinse with hot water). If the resistance is stable in both cases, the sensor also needs to be changed.
• Additionally, check whether the contacts of the heater relay are jammed (the relay is located on the control board).
• If there is power, then the heating element is burnt out and needs to be replaced.
• To replace, remove the wires and unscrew the bolt holding the heating element in the area of ​​the shank.
• Slowly shake the heating element from side to side and remove it by pulling it towards you.
• Clean the area where the heater was located - there may be debris there.
• Install a new heating element, connecting all the necessary contacts and the temperature sensor.

As you can see, self-repair is a simple matter if you treat it responsibly. Ardo washing machines are of high quality, and it’s a pity to throw them into a landfill at the first breakdown, thinking that repairs will cost an exorbitant amount. You can save a lot by repairing your washing machine at home yourself.

The machine does not respond to your actions

When figuring out why your assistant, the washing machine, won’t turn on, it’s a good idea to check the presence of electricity in the apartment before starting to look for a problem in the unit itself. Perhaps the lights were turned off in the entire house, and you only noticed it now. Another possible source could be a short circuit, as a result of which the plugs in the electric brush were knocked out.

The reason why the washing machine does not start may be a damaged power cord. This can happen due to constant bending in the same place, or due to mechanical stress. Carefully inspect the cord to eliminate external defects. Use a multimeter to test the wire for faults. If the problem is caused by a damaged cord, replace it. As a last resort, repair the break using electrical tape. If your machine is connected to the network via an extension cord, make sure it is in working order. Plug the device directly into the outlet, or test the extension cord on another equipment.

Sometimes it happens that the machine does not turn on due to a fault in the outlet itself. Check its functionality by connecting any other device.

Some washing machines have power supply connected to the power button. You should check its working condition using a tester. To do this, disconnect the equipment from the network and ring the button in the “on” position. If the multimeter makes a sound, it means the button is working. When it is turned off, the device should be silent. If you do not replace the button when a defect is detected, the machine will not be able to be turned on.

Companies such as Ardo, Virpul, Samsung equip their equipment with an interference filter, however, the Indesit and Atlant SMA washing machines are no exception. The FPS must eliminate electronic radiation emanating from a household device and that can affect the performance of other nearby equipment. The noise filter may malfunction due to a short circuit. As a result, the electrical circuit is disrupted and the washing machine equipped with FPS stops turning on.

To check the operating condition of the device, you need to use a multimeter. First, let's ring three wires at the input, then two at the output. Voltage must be present at both ends. If it is not present at the output, the FPS must be replaced because it is faulty.

The last part that needs to be checked is the control module, which is a printed circuit board; it needs to be tested using a tester. If you discover a problem, do not rush to fix it yourself, evaluate your strength. It is better to use the services of a service center.

Repair rules

The most reliable way to fix a breakdown of the Ardo washing machine is to contact a professional technician. If you have experience in repairing household appliances and you are confident in your own knowledge, then you can fix simple problems yourself. The main thing is to correctly diagnose the breakdown.

The simplest situation is when a fault code is displayed on the display. Knowing which component needs to be replaced, buy an original spare part at a company store (offline or online) or at a service center. Work only with original components. Using any counterfeit will lead to even more serious consequences.

Important! Before starting repairs, disconnect the device from the power supply. Once the back cover is removed, disconnect the wire that goes to the motor. Only after this can you unscrew the connecting bolts and begin repairs.