How to change a light bulb in an Atlant refrigerator: detailed instructions

What to look for when replacing a lamp in Atlant two-chamber refrigerators

In two-chamber devices, the freezer and refrigerator compartments have their own light, independent of each other. Manipulations for replacing a light bulb in such devices are performed separately for each compartment according to the scheme described above.

You can increase its service life. To do this, first of all, it is necessary to keep the cameras clean and tidy and monitor their condition. Light bulbs most often fail due to condensation and excess moisture. The outlet into which the refrigerator is connected must be grounded. The freezer and the refrigerator itself should be operated according to the instructions. Provide the device with the required temperature and humidity conditions. Another common reason why a light bulb burns out is power surges. Using an uninterruptible power supply or surge protector will help avoid this. Experts advise those who just want to buy a refrigerator to opt for a model with LED lighting.

It is important to replace a burnt-out lamp as quickly as possible, as this can affect the life of the refrigerator itself. Because in the absence of internal lighting, the door remains open longer than with a working lighting element

As a result, the load on the compressor increases significantly. It fails ahead of schedule. Replacing a faulty light bulb yourself is not at all difficult. But before that, be sure to study the instructions attached specifically to this model. If you have the slightest doubt, you should seek the services of experienced professionals.

How to extend the life of a light bulb

To avoid having to change the lamp frequently, you need to follow a few simple rules:

Keep an eye on the humidity in your refrigerator, as condensation and water cause frequent lamp replacement.
For refrigeration appliances, install a Euro socket with a grounding function.
Use the refrigerator only in accordance with the instructions. Pay particular attention to humidity and temperature conditions.
Voltage surges are also one of the reasons why light bulbs burn out. Use a surge protector or uninterruptible power supply.
Although the type of lighting is not an indicator of the quality of the refrigerator, when purchasing, give preference to installations with LED lamps. They are reliable and durable.

If the light bulb burns out without working for the required time, check the shutdown button, which is usually located inside the camera on the side or top panel. Deformation of the door can lead to the fact that the lighting device works around the clock, the light is on even when the door is closed. Fixing the problem is simple: stick a polystyrene plate of the required width onto the button itself.

In this article, we tried to describe in detail the process of replacing a light bulb in a refrigerator Atlant, Indesit, Samsung, etc. We hope our article helped you!

If you open the refrigerator and it is dark, then most likely there is a problem with the lighting. The simplest reason: the light bulb in the refrigerator burned out. But darkness inside can also signal more serious problems that require professional repairs.

Features of replacing different types of light bulbs in the Atlant refrigerator

How to change a light bulb in a two-chamber turquoise refrigerator

It is worth noting that different types of lamps require different approaches. For example, you can hold a regular incandescent light bulb by the glass part, but do not press or squeeze it.

Be sure to screw in smooth movements so that the base is correctly positioned in the thread of the socket. During the process of replacing a lamp like this, the glass sometimes breaks.

In this case, it is important to be careful and not try to remove the remains and fragments with your hands.

Round nose pliers or pliers will come to the rescue. You just need to grab the edge of the base with a tool and unscrew the lighting fixture. Unlike vacuum bulbs, halogen bulbs cannot be touched by the glass part with bare hands. Local overheating may occur at the point of contact. This reduces its work life.

During installation, the quartz bulb of the lamp must be held through a clean cloth or with gloves. In case of accidental contact, it is recommended to wipe the surface with a cloth that does not leave marks, for example, microfiber with an alcohol solution.

Such lighting devices must be removed very carefully so as not to break the flasks with harmful mercury vapors. They are mainly used in the food trade.

Choosing a light bulb for the Atlant refrigerator

Experts recommend purchasing any parts and lamps from the same brand as the refrigerator itself. You can find an identical model in specialized centers where they repair similar units. Of course, such a light bulb will cost more than a standard model from a store, but it will fit perfectly into the refrigerator.

If there is no specialized center in your city, then you should try to find a similar lamp in a specialized store. To do this, you will first need to dismantle the old one and bring it to the store.

When choosing a light bulb, take into account the following criteria:

power;
plinth size.

It is necessary to choose a lamp with the same base as the old one.

Most often, store consultants can tell you which model a particular light bulb fits. However, it is necessary to independently compare your option with those available on the display case.

When choosing power, you should also be careful, because even if the light bulbs have the same number of watts, the degree of illumination can differ significantly. For example, LED models shine much brighter than standard vacuum ones.

What kind of light bulbs are used in the Atlant refrigerator?

How to change a light bulb in a suspended ceiling?

Depending on the design and parameters of the refrigerator, the following types are installed inside the chamber:

incandescent lamps;
LED;
luminescent;
halogen.

If you are wondering which light bulb is best for installation instead of a product that has burned out, you need to study the basic parameters of each option. For example, an incandescent lamp is the simplest in operating principle and does not last long (the average is 1000 hours). It produces yellow radiation, which is considered the most comfortable for the eyes. This option has a significant drawback: it is distinguished by high power. According to this criterion, it is inferior to more modern analogues.

Considering that the dimensions of the refrigerator chamber are relatively small, the level of energy consumption when turning on an incandescent lamp increases slightly. For this reason, such light sources are still used in single- and double-chamber units.

An LED light bulb for a refrigerator is the best choice. It does not heat up, which means it will not affect the microclimate of the unit during operation. In addition, this type of lamp is resistant to temperature changes and low values of this parameter. There are a large number of models of such products. In addition, they differ in color temperature, which allows you to select a light bulb that produces radiation of the required shade (white, neutral, yellow, etc.).

The price of this option today is acceptable. The idea that such light bulbs are expensive is a myth. Considering that they last much longer than their incandescent counterparts (30-50 times), it is advisable to purchase a product based on LEDs. It is distinguished by a long service life. However, you need to remember that over time (closer to the end of their service life) such light bulbs begin to dim. This phenomenon is the result of their working mechanism. Loss of light saturation occurs after decades of intermittent use (as in the case of a refrigerator).

Fluorescent lamps are similar in properties to their LED counterparts, but last less - up to 15,000 hours, and they also operate on a different principle (they contain a gaseous substance inside). However, this is a fairly long period, considering that the lamp in the refrigerator is not constantly on. It is also noted that this variety produces cold light.

In large-sized appliances, halogen light bulbs are also found. They are in many ways similar to incandescent counterparts, but last longer - up to 2000 hours. The disadvantage of the halogen version is the high heating intensity. It is also distinguished by significant power. These factors may contribute to a slight increase in energy consumption. They explode when touched. This phenomenon is due to a significant increase in the heating temperature of the glass flask at 1 point on the surface of the product.

When choosing a lamp, the load on the electrical network is also taken into account. To illuminate the chamber inside the refrigerator, there is no need to install powerful products: 60, 100 or more W. This is an unnecessary waste of energy. The power limit for refrigerator lamps is 40 W. However, this option is suitable for lighting large devices.

If LED lamps are installed, in this case the power varies between 15-25 W. This is enough to illuminate a medium-sized camera. If the refrigerator is large, install 2 lamps of moderate power or 1 piece, but of higher power.

Types of light bulbs

So, we have figured out the reasons for the breakdown, it’s time to find out which light bulb is best for replacement. The following options are available:

incandescent lamps;
LED bulbs;
fluorescent lighting sources;
halogen bulbs.

Each type has its own advantages and disadvantages, which we will discuss in more detail below.

Incandescent

A budget replacement option, which all leading manufacturers of freezing equipment are gradually abandoning. Among the advantages of incandescent lamps are:

low cost;
nice, bright light.

Disadvantages of the model:

low service life. For most incandescent lamps it does not exceed 1 thousand hours in active mode;
high power, and therefore energy consumption.

LED

The optimal option for any freezing installation, thanks to the following characteristics:

LED light bulbs hardly heat up, which is why the lighting element has virtually no effect on the internal microclimate of the camera.
A light bulb with an LED is practically insensitive to sudden temperature changes, which cannot be said about other varieties.
Thanks to a wide selection of sizes, shapes and shades, choosing the right lamp will not be difficult.
The service life is much longer than other products. In comparison, an LED bulb will last approximately thirty times longer than an incandescent bulb.

Luminescent

The characteristics are similar to LED analogues, and the only significant difference is the service life. It is smaller, and the maximum period of time that a fluorescent lamp can work is 15 thousand hours. Also, owners of refrigeration units equipped with a fluorescent light source note that the lighting is dimmer and colder.

Halogen

They are used in large-sized equipment that requires powerful lighting sources. Halogen lamps are similar in properties to incandescent lamps, but have a longer shelf life - around 2 thousand hours. They are much more powerful than other analogues, which affects the overall energy consumption of household appliances.

Note! Do not touch halogen light bulbs with bare hands. On contact, they can explode due to a sharp temperature change concentrated at one point.

Extending the life of a light bulb in an Atlant refrigerator

Top 10 malfunctions of Atlant refrigerators and their repair

The lighting in the refrigerator can function for many years; it is important to follow these rules and recommendations:

Ensure optimal humidity levels in the refrigerator compartment and wipe away excess moisture. Make sure that no drops of moisture come into contact with operating indicators and lamps. Condensation and water lead to rapid failure of electrical equipment and wiring;
connect the unit to a grounded outlet through an RCD, which will make it possible to avoid voltage surges;
purchase equipment with an LED lighting system, which is the most durable.

Replacing a refrigerator light bulb is a simple procedure.

To extend the life of the equipment, take precautions, defrost the unit in a timely manner, and avoid the accumulation of moisture and condensation.

I recommend to read:

Video on replacing the compressor of the Atlant refrigerator - Video: replacing the compressor of the Atlant refrigerator https://www.youtube.com/watch?v=27dg9be0_NM Video: repairing the Atlant refrigerator - replacing the compressor https://www.youtube.com/watch?v= dX75XGfCDfo Video:…
Video on replacing the thermostat of the Atlant refrigerator - Video: replacing the thermostat on the Atlant refrigerator https://www.youtube.com/watch?v=r04yaJ4Qzqo Video: refrigerator Atlant MXM 1733 - replacing the thermostat https://www.youtube.com/watch? v=GGyC3IhJCw4 Video: replacement…
LED light bulb in the refrigerator: how to select and replace a spare part - The refrigerator is the most necessary item in the house, its malfunction even for a short time causes a lot of inconvenience. One of the breakdowns that can happen to it is...
The red light on the Atlant refrigerator is on: how to solve the problem - Modern refrigerators are equipped with a system that notifies owners about the presence of a malfunction. If the device starts to malfunction, then the panel lights up...
Replacing a light bulb in a two-chamber Atlant refrigerator with your own hands - So, we have the Atlant refrigerator in front of us. How to change a light bulb inside? First of all, you should start: By turning off the refrigerator from the network. All manipulations with the equipment turned on...
The light in the refrigerator does not light: what to do? — If the light in the refrigerator cabinet is not lit, it becomes inconvenient to use, since the missing lighting interferes with the normal determination of the contents of the chamber. Solve the problem and...
Connection, repair and replacement of the start relay of Atlant refrigerators - Atlant has been manufacturing refrigeration equipment for more than 50 years and during this time has established itself as a reliable manufacturer. Thanks to the impeccable…

First stage: preparing the refrigerator

So, before us is the Atlant refrigerator. How to change a light bulb inside? The first thing to start with is:

1. By turning off the refrigerator from the network. All manipulations while the equipment is turned on can, at best, result in a short circuit, and in the worst case, an electric shock.

2. Remove food from the top shelf as it will interfere with subsequent operations.

3. From removing the top shelf after emptying it of food. It's easy to do. It is enough to release the holders, pull them towards you and pull the glass shelf itself out of its grooves.

Atlant refrigerator failure or light bulb burnout

Before replacing a light bulb, you should make sure that the problem of lack of lighting is in it. First of all, check the serviceability of the cord, socket, and wiring. Connect any electrical device or plug the refrigerator plug into another adapter. If at the same time the motor does not start working, the cold is not felt in the chambers, this may indicate a malfunction of the mechanical or electrical parts. Then the base and cartridge are inspected; there should be no dust or greasy stains on the contacts.

Manufacturers of modern household refrigerators have provided light bulbs with a number of functions. If the lighting is chosen correctly, you can see in time that food in the refrigerator compartment has spoiled. Some models do not have lighting in the freezer compartment.

The presence of a lamp will help determine whether the door is tightly closed. If the refrigerator is well closed, the light stops coming on. Although today devices are produced that emit a sound signal. With excellent lighting in the refrigerator compartment, it is much more convenient to select products. It’s good if the light is cool in color, so it doesn’t embellish the appearance of the food.

Don't rush to buy a new light bulb and replace it! This may not help if the cause is not electrical and equipment failures. To prevent errors, perform thorough diagnostics and determine the type of malfunction that has occurred.

Check the wiring in your house. Often problems arise due to chafing or loosening of wires.
Inspect the outlet and power source. Problems can arise from a poor connection. Plug other equipment into the outlet to check its operation.
Make sure that electricity is supplied to the apartment as usual. Perhaps there was a power outage throughout the entire house? Try turning on other electrical appliances. If they also do not work, then the reason is the lack of light.
Observe the operation of the household appliance. Refrigerators usually turn off for a few minutes. This is normal operation. If there is no light for more than 30 minutes, you can assume that the problem is with the light bulb.

If after following all the steps in the instructions the lamp does not light up and the refrigerator is still dark, then the problem lies with the lamp itself. To fix the problem, you need to completely replace it.

Location of the light bulb in the Atlant refrigerator

It is important not only to correctly determine the cause of the malfunction and select the right light bulb. Depending on the product model, the lighting will be located in different parts of the refrigerator compartment

This affects the difficulty of access to the lampshade and the design of the fastenings.

Highlight:

light sources located on the top panel;
on the sidebar;
on the back panel; on the visor.

On the top panel

Algorithm of actions when replacing the light located on the front panel of the refrigerator:

de-energize the device;
carefully remove the lampshade using a screwdriver;
replace the damaged element;
install the lampshade back;
We check the functionality of the new part.

On the sidebar

Light sources located on the side panel are removed in a similar way. The only difficulty that the owner of the refrigerator will encounter when replacing it will be the need to clear the shelves for better access to the ceiling.

On the back wall

The most inconvenient option for the location of the lamp, since in order to get to it, you will have to not only pull out the products, but also dismantle part of the shelf.

If this is not done, it will be almost impossible to get close to the burnt-out lampshade.

On the visor

Removing the lampshade on the canopy is no problem, since access to it is not blocked by any obstacles. The main thing is not to forget to turn off the power to the freezer, and there shouldn’t be any problems with the rest.

What is the power and where are the lamps located?

It is worth considering that the final cost of the device does not depend on the light bulb. So, in small and medium-sized refrigerators there is only one lamp with a power of no more than 25 W. If you have a large-sized device, this will not be enough, so install either two lamps with a power of about 20 W, or one with a power of about 45 W.

The lighting is usually placed on the side panel on the side where the door is attached - then the lamp is connected to the switch. However, there are other lamp placement methods that you should familiarize yourself with before proceeding with replacement:

on the side closer to the back wall;
on the back wall;
above;
on the ledge.

The best placement option is the back wall or the side wall next to it - this allows you to get uniform lighting on each side. If the light bulb is on top, then only the upper shelves are clearly visible, which makes using the lower ones inconvenient. This nuance is especially important in the presence of a large-sized device. The worst placement option is considered to be a visor - then there will be little light in all parts of the refrigerator.

Reasons for the failure of the light bulb in the Atlant refrigerator

If, when you open the door, you notice that the light in your refrigerator is not on or is blinking, you must first determine why the problem occurred. Flashing may be caused by voltage fluctuations and surges in the electrical network. If the lights do not turn on, follow these steps to identify the cause:

check the presence of electricity by clicking the switch - most likely, the electricity in the apartment is turned off;
inspect the cord for damage to the insulation;
check the functionality of the outlet by connecting another working device;
if the appliance does not turn on and does not cool the food, a serious breakdown may have occurred;
the light bulb has burned out - in this case it needs to be replaced;
The cartridge or its contacts may be damaged, which will require calling a technician.

If, as a result of such diagnostics, you have discovered that a light bulb has burned out, replacing it on a domestic refrigerator is not difficult.

Why the lamp does not light: reasons

If you open the refrigerator and find complete darkness, then you should not immediately unscrew the lamp - first you need to determine the cause of the problem.

You will need to do the following:

If the device operates silently, then it is necessary to check the integrity of the wiring.
You should check the serviceability of the outlet by connecting another device to it.

It is necessary to check the functionality of the refrigeration equipment. If about half an hour has passed, and the unit is still operating quietly, then the problem is in its internal structure, and not in the light bulb (perhaps the compressor or motor has become unusable).

Changing the light bulb in the Atlant refrigerator

Now that there is nothing else stopping us, the light bulb has been purchased and a screwdriver is at hand, we can proceed to further operations on how to change the light bulb in the Atlant refrigerator (photos of all actions are attached here).

We insert a screwdriver into the grooves of the screw (you won’t be able to look into it, but it will be difficult to miss by touch) and begin to turn it out.

When the screw is in our hand, we put it and the screwdriver aside. We won't need them for now. To remove the lamp, apply a little pressure and move it towards the screw. It will slide out of its grooves in the frame and end up in our hand.

Now we proceed to the actual manipulations of how to change a light bulb in the Atlant refrigerator, that is, unscrewing the burnt out one and screwing in a new one bought in a store in its place.
We do all the steps in reverse order. We insert the lamp into its place and screw in the screw that holds it.

We plug in the refrigerator and check it. If the lighting device is on, our actions on how to change the light bulb in the Atlant refrigerator can be considered successful and complete.

We take the shelf, insert it into the required grooves (runners) and move the stops (shelf fastenings) to the far wall until they stop. We put the food we took out earlier back in its place, and that’s it. We hope that this light bulb will be much more durable than the previous one, but in any case, we already have experience in replacing it, so we are no longer afraid of such problems in the future.

Rate this article:

How can you make sure that it is the light bulb that has burned out and not the refrigerator itself?

If, upon opening the refrigerator door, you see that the lighting inside has not worked, then you immediately begin to think that the unit itself has burned out. But for such refrigerators this is a rare case. They are reliable and durable, and it is rare that any of them does not last its full warranty period, and in addition to it, several more such periods. But still, so that your efforts are not in vain, before changing the light bulb in the Atlant refrigerator, you should look at the lighting fixtures on the working panel.

If they light up, then the problem really lies with the light bulb itself. You can also wait and, without closing the door, wait for the warning signal that it is open. If one is not slow to wait, the problem is definitely a burnt out light bulb.

Then we roll up our sleeves and get to work on the repair work.