Like any equipment, the Indesit washing machine can sometimes malfunction. One of these situations is the lack of drainage and freezing of the washing process.
In some cases, you can cope with the failure yourself, in others, you cannot do without the help of a specialist.
What to do if the Indesit washing machine does not drain water, what are the reasons for the breakdown, what are the ways to solve the problem, we will tell you in the article.
Diagnosis of Indesit washing machine errors
It should be borne in mind that the absence of drainage during operation of the washing machine does not always indicate a serious breakdown. This may be an easily fixable failure , which will not be difficult to cope with.
When stopping the cycle without draining, it is necessary to sequentially analyze the situation and study the condition of the nodes involved in the water discharge process. You can start with the simplest and, according to statistics, more frequent problems, gradually moving on to more complex ones.
Diagnostics must begin by checking which mode was selected on the Indesit washing machine, and whether an error code is displayed on the display. This is necessary to ensure that the no-drain mode has been configured. Then the remaining water in the tank is the normal state of the washing machine.
Some wash programs include a water stop. If the user selects this washing mode, then stopping is not a failure, this is a normal situation.
Most often, stopping without draining occurs in the following modes:
- wool;
- silk;
- delicate fabrics.
If a fault code appears on the display, it should be analyzed as it indicates the cause of the problem. Based on this information, you should check the functionality of the nodes:
Codes F05 and F11 may indicate a pump malfunction.- A problem with the control module is often indicated by codes F09 or F18.
- A failure of the pressure switch can be signaled by code F04.
- Problems with the electrical system and drain pump contacts are indicated by code F05 and code F11.
- Drain filter clogged.
- Installation and connection of an Indesit washing machine with irregularities (kinked drain hose, incorrect installation, etc.).
- Clogged sewer system.
In addition to the listed node failures, a one-time failure in the operation of the equipment is possible, which will not recur after a reboot and is caused by a random combination of circumstances.
The washing machine does not drain water: ways to solve the problem
One of the most common problems with washing machines is the water not draining. The problem can arise for various reasons. But before finding out the source of the problem, you need to understand how exactly the problem is defined. This article discusses ways to solve the problem and provides recommendations for prevention so that the water always drains naturally at all stages of washing.
What to do if the drain doesn't work?
When the washing machine stops operating and there is water left in the drum, it is necessary to analyze the situation and determine the cause. You should start with the selected washing program.
Delicate mode
If, when starting the wash, a mode was selected that does not provide water discharge, then you must :
- turn on the washing machine (if it is turned off);
- in setting the modes, select only “drain” or “spin”, without the washing itself, you also do not need to add detergent;
- After the end of the program, things can be taken out of the drum without problems.
The solution to the problem is to set the drain mode.
Drain filter clogged
If the drain filter has not been cleaned for a long time, this procedure should be carried out immediately. Access to the filter is from the front side below. Before carrying out work, the machine should be de-energized.
The solution to the problem is cleaning the filter. Cleaning procedure:
- Open the panel.
- Turn right and pull the filter towards you.
- Clean and rinse the filter.
- Return the part to its original place.
- Install the cover panel.
When cleaning the filter, water is drained, so it is necessary to place rags in advance and prepare a low container for draining the liquid.
The drain in the house is clogged
To determine whether the problem is caused by a general clog in the drain, you need to observe how the water flows from the sink and bathtub. Additionally, you should (if possible) conduct the following test:
- disconnect the washing machine drain hose from the sewer connection;
- throw the free end of the hose into the bathtub, sink or toilet;
- run only the “drain” mode;
- If water flows, then the problem is not a breakdown of the washing machine, but a clogged sewer.
The solution to the problem is to clean the drain yourself or call a plumber. Once the blockage is removed, the washing machine can be used as usual.
Incorrect installation
For successful operation, the Indesit washing machine must be correctly connected to the communications. For high-quality drainage, it is important that the hose through which water is discharged is raised above the level of the tank, in accordance with the installation rules, but is positioned freely.
It is important that there is no bend and that it is not deformed or pinched, for example, by tightly pushed furniture. The solution to the problem is the correct free position of the hose .
Random program crash
In rare cases, the Indesit washing machine may freeze for no apparent reason.
The solution to the problem is reboot . To do this, the machine must be turned off and turned on again after 20 minutes. After this, select the “drain” mode.
If the outflow of water began, then the cause was an accidental failure. Otherwise, you need to continue troubleshooting.
The cause of unstable operation of household appliances may be voltage surges. In this case, the Indesit connection must be made through a voltage stabilizer.
Drain pump failure
Malfunction of the drain pump is most often associated with the entry of foreign objects into it - coins, torn buttons, etc. If a breakdown occurs, the part requires replacement .
How to change the pump in the Indesit washing machine is shown in the video:
Drain system clogged
When the washing machine enters the draining stage, the pump starts working, the pump pumps water, but the liquid does not drain. In this case, it is likely that debris in the drainage system is obstructing the flow of water.
The following may be clogged:
- drain hose;
- pump, etc.
After identifying the blockage area, cleaning is carried out. The solution to the problem is cleaning the pipes and hose.
Control module failure
If the Indesit washing machine does not drain water or is extremely unstable, draining water not every time, then there is a possibility that the reason lies in burnt-out elements of the control board.
In order to repair the module, professional diagnostics are required , the results of which may require:
- solder the tracks;
- solder the contacts;
- replace burnt out elements;
- reflash the module.
If the board is seriously damaged, a complete replacement of the assembly may be necessary. It is better for such work to be done by specialists who have the skills to perform such work. The solution to the problem is to call a specialist.
Causes
If the machine does not drain water or spin things out, you should first find out the reason. In this situation, the reasons are divided into two types:
- Problem during operation:
- clogged drain hose, filter or pipe;
- incorrectly connected hose;
- Wrong choice of washing program.
- Breaking:
- breakdown of the pressure switch - the water level sensor in the machine, which is responsible for timely draining;
- failure of the electronic drain system;
- electric pump failure.
Call a master: where and how much?
Not in all cases you can fix the problem and get the washing machine working on your own. If you can’t solve the problem on your own, you need to contact a company that repairs washing machines.
You can search for such a company on the Internet by indicating the name of your city. The companies' website contains contact information, a list of work performed and a price list.
Prices from companies vary even within the same city.
Approximate prices:
- Pump replacement – from RUB 1,600.
- Removing blockages in the drain system of the machine - from 1,100 rubles.
- Diagnostics and repair of the control module – from 2,000 rubles.
- Repair or replacement of the pressure switch – from 1,600 rubles.
- Cable replacement, electrical diagnostics – from RUB 1,500. etc.
A serious company that maintains its reputation in the market has a good reputation. You can find reviews on the Internet by company name.
After finishing the work, the master conducts a trial run of the work . If the operation of the washing machine is restored, a warranty is issued for the repair performed.
It is recommended that if your washing machine breaks down, you seek help from specialized companies and do not trust the technician to random technicians, who may turn out to be scammers.
The requirement for an advance payment, the lack of information about the company on the Internet or, conversely, the presence of a large number of negative reviews should be alarming.
A lot of important and useful information about repairing Indesit washing machines is presented in this section.
How to drain water from a washing machine: 4 options + video
Depending on the reason why the washing machine does not drain the water, the method of emptying the drum is selected. There are several ways to remove water.
Through the drain hose
The hose is disconnected from the drain tube; place it below the level of the tank. Be sure to align the hose along its entire length so that the liquid flows out evenly. The water is drained into the prepared container. The hose is usually attached to a sewer drain, or a drain under a sink or bathtub.
Through the filter
Place a container under the filter. After:
- The panel and hatch are removed;
- The body of the machine tilts forward;
- The filter is unscrewed counterclockwise.
There is no need to twist it all the way, its fastening only weakens. Water passes through this hole. It will have to be removed in small portions, because... It will not be possible to place a deep container under the filter.
Through the pipe
Draining is done in cases where the filter is too clogged to carry out the procedure through it. To completely empty the drum, the flap in front of the pipe is completely unscrewed. If water does not flow through the pipe, it is clogged.
Through the hatch
This method is suitable if you cannot drain the water using other methods. You just need to open the machine door and scoop out the water manually. If the drum is horizontal and the water level is higher than the bottom edge of the hatch, before draining the water from the washing machine, it must be tilted back.
Video instruction
How to determine the problem?
It’s almost impossible to immediately say what the problem is with a Samsung washing machine. Finding the cause will take time , since you will have to go through all possible options step by step.
When is water in the tank normal?
In some cases, the problem can be solved very simply. For example, there are types of delicate washes designed to care for wool items that do not end in drainage.
If at the end of the cycle the clothes are wet and water remains in the tank, you need to check which mode was selected. This may be one of the delicate modes.
Program crash
Program failure can be caused by changes in voltage, pressure in the water supply , as well as significant overload of the drum with things. The problem associated with power surge is random in nature.
You can try to start the cycle again and see if the drain will run normally.
Drum overload
If there are a lot of things in the washing machine drum, some of them should be removed. When wet, they become heavy, and the washing machine cannot cope with such a load.
After this, you need to turn on the washing machine again and repeat the cycle. If overload was to blame, then it is necessary to draw conclusions and avoid similar situations in the future.
What does the machine itself “say”?
The Samsung washing machine reports a malfunction using error codes sent to the display, as well as sounds uncharacteristic of normal operation.
Eg:
- a malfunction in the control module, pump, pipe, wiring can be indicated in the following combination of letters and numbers - 5C, , SE, ;
- wiring, poor contact, damaged controller, pressure switch, failure is indicated by codes: IC, 1C, E7, 1E, IE;
- The hum of the machine when it tries to drain may indicate that the pump is airy or that foreign objects have entered the pump.
Since during the repair process you will need to check the functionality of various components, it is necessary to ensure convenient access to the washing machine from all sides.
Let's take a look and see
Repairing the drain pump means cleaning it. More precisely, you need to clean the pump impeller. To do this, you need to remove the rotating part. This is done simply: use a screwdriver to unscrew all the screws on the body, half the body and find the “head” with the blades.
The impeller should rotate, but not too freely. If the “wheel” flies off the landing axle, then the part must be fixed tighter. When the blades are blocked, we act differently - we clean off all the interfering debris, hair and threads. At the same time, the pump and snail are washed.
The manufacturer recommends comprehensive cleaning of the washing machine at least once a year.
The cleaned parts are returned to their place: the impeller on the pump, and it on the volute. The installation process occurs in reverse order. Upon completion, it is recommended to run a test wash and evaluate the quality of work. If the cycle runs silently, the water successfully drains from the drum into the sewer, and the self-diagnosis system does not detect a failure, then the problem has been resolved. Otherwise you will have to look for a replacement.
