Setup process
Before you decide to set up your electronic floor scales, you need to insert the battery and test the device. This will allow you to find out information about serviceability even in the store.
The basic settings include several main steps:
- Floor scales should only be placed on a perfectly flat surface in a strictly horizontal position. A floor with a smooth texture is best. Carpets, uneven surfaces, and protruding elements are not suitable under any circumstances. They may increase measurement error.
- If you don’t know how to check electronic scales, then first of all you need to turn them on and start working. This is done using a button or by touching the sensor surface. After this, a zero count is displayed and this allows us to say that the device is ready for use. Some models may turn on when weighing. You can find out more about the method in the data sheet. All data is displayed there.
- Scarlett scales only work accurately when the person stands up straight and their legs are parallel to each other. This is necessary so that the mass is evenly distributed and accurate indicators are displayed. Typically, sensors are located on two sides of the center. It must be remembered that the stability of the device when first turned on will subsequently affect the correctness of the readings. We configure a huge number of models automatically during the first launch.
IMPORTANT! If there are any additional functions, it is better to find out about the specific settings in the instructions. After completing all the procedures, you should not have any questions about how to set up the scales.
Check for accuracy
How to check scales for accuracy? Many people ask this question. Modern options can guarantee only a small deviation from the required measurement value. The maximum permissible deviation is up to 0.4 kg. To check the measurement error, you can carry out several weighings at once, without being distracted by anything, and subtract the minimum from the maximum mark. Most often, such a check reveals that the permissible error has been exceeded. In this case, the malfunction may lie in the operation of the sensors.
IMPORTANT! If sc scales are for weighing people, then they won't be suitable for things. This may damage the device. It is best to immediately study the instructions for electronic scales.
Many new models of electronic scales today have a reset function. Most often, the button is located at the bottom and allows you to completely reset all data. To press it, you must carefully turn the product over and turn it on. If this does not help, then it is best to take the floor-standing devices for repair or purchase a new component.
Storage conditions
If you have a question about how to set up electronic scales, then another question should arise about how to handle them correctly. When using the device, you must remember about safety. To do this, it is best to immediately follow several main points that will help you use the device for a long time.
Among these it should be noted:
- It is best to store electronic scales on isolated surfaces, away from heating devices. If you don't use them every day, you can even put them away from your everyday places.
- Completely remove temperature changes, high humidity, mechanical stress, dust and dirt, as well as sunlight. This also applies to electronic commercial scales, which must also be configured upon first use.
- If you decide to clean the platform, then you should take a damp cloth for this, and a dry one for the base. The use of chemicals is not recommended.
- If the scales are used in rooms with high humidity or where water may enter, this will lead to destruction of the metal parts. Subsequently, this will affect the accuracy of the measurements taken.
- Under no circumstances should you subject the scale to physical force or jump on it. All this will lead to breakdowns, as well as cracks on the surface. In either case, accuracy deteriorates.
If you provide such decent storage conditions, the scales will be able to work for a long time. In order for floor scales to be used for a very long time, it is better not to neglect the operating conditions.
Handle them carefully. Conventional elements can support a person's weight up to 216 kg. If you exceed this mark, the electronic bathroom scale may damage its mechanism.
Electronic floor scales Vitek
The Vitek company specializes in the production of household appliances in different price categories. The brand's product range includes irons, kitchen appliances, and, of course, electronic floor scales.
Design
Vitek floor scales are not distinguished by their catchy design and unusual shape. Most of the brand's models are simple square platforms made of tempered glass with an LED display and some kind of pattern. The choice of colors is quite rich - you can find strict monochromatic scales, or you can choose a model with flowers, with stones, under denim, even with a photo of sneakers.
VITEK VT-8070 MC - scales of a simple shape with a creative image
However, there are a few exceptions, for example, VITEK VT-1980 W. These scales are made of metal and white plastic, have a massive and stable body and look very stylish and modern.
VITEK VT-1980 W also has a huge display to demonstrate all measurement parameters
Vitek scales have a large screen with large numbers about 35 mm high. Most models have a compact body of about 30x30 cm.
Functionality
All floor scales from Vitek can be divided into two large categories - conventional and diagnostic. Moreover, both of them are represented by a very wide range of models.
Regular scales from Vitek can detect the user's weight and display it on the screen. These devices have a simple design, can withstand weights of up to 180 kg and cost up to 1,000 rubles. Some models also display the room temperature on the screen.
More functional diagnostic scales are able to determine the percentage of water in the body, the proportion of fat and muscle tissue.
This occurs by passing a weak and completely painless current through the user's body during weighing. The speed at which electricity passes through different types of tissue varies, so the device can more or less accurately determine the components of your body.
In order for the scales to correctly display this data, you must adhere to the following rules:
- measure the percentage of fat and water in the evening before dinner;
- After eating, wait 2-3 hours before weighing;
- if you had an intense workout, you should wait another 10–12 hours, otherwise the percentage of muscle tissue will be too high.
Diagnostic scales include:
- VITEK VT-1987 VT;
- VITEK VT-1983 BK;
- VITEK VT-1984 GY;
- VITEK VT-1956;
- VITEK VT-1964 BK;
- VITEK VT-1967;
- VITEK VT-1978;
- VITEK VT-1980 W.
Their cost varies from 1,300 to 2,500 rubles. All diagnostic scales support storing several family members (usually up to 10) and are able to show the user measurements over time.
All Vitek scales are capable of displaying weight in kilograms and pounds. The user can switch the measurement system on the underside of the scale.
Some models also support British stones, which is equal to 14 pounds
Accuracy of measurements
Vitek scales are highly accurate. The standard measurement step is 0.1 kg. Like other floor scales with rubberized feet, the Vitek can produce different results when moved from place to place, so it is best to find a specific corner for it. The floor for installation should be as level as possible.
Reliability
Vitek make weighing platforms mainly from tempered glass. The most expensive models, for example, VITEK VT-1980 W, are made of durable plastic and steel. The scales can easily withstand weights up to 180 kg. Even inexpensive models are resistant to damage.
I can safely say that they are shockproof, because they are in the kitchen, in the most trafficked place in our house, and the children stand on them at least ten times a day, and not only stand on them, sometimes they also jump and bang with toys.
Elena Miromanova
https://irecommend.ru/content/vse-ob-etikh-chudo-vesakh
Setting up electronic scales before starting work
Before using the scale for the first time, it must be installed, calibrated and configured. First of all, you need to remove the protective covering of the battery compartment and insert the batteries into it, not forgetting about the polarity (it must match the battery and the terminals in the compartment). The scale display shows LO when the batteries fail and require replacement. If the scale is rarely used, the batteries can be removed.
Some models of scales are equipped with alternative energy sources and are powered by the sun or by converting mechanical energy during weighing.
To begin work, after the batteries have been inserted, the device must be placed on a flat, hard surface, preferably level. The accuracy of measurements depends on this. For example, a soft carpet is not suitable, the values will float and not correspond to the actual ones. Ideally, the scale should be kept in one place at all times. This way their position will not affect the result.
To adjust the sensor, you need to press on the scale platform; in most scales, the desired point is in the upper right corner. The display will show 88:88, after which 0.0 or simply 0 will appear. This signals readiness for work.
Test 2. Ease of operation/data programming
To start programming, press the SET button. Control is carried out using the “more/less” and SET buttons (analogous to OK, confirmation of action). Entering user data begins with selecting a memory cell number by successively pressing the “up/down” buttons; this is the most common “leaflet”. Select a user number with your data – from “P-0 user” to “P-9 user”.
You can view personal information in custom cells by repeatedly pressing SET. If the cells are not filled in, then fill them in (use the scroll to set gender, age, height): it’s very easy - the gender parameter is indicated by the “boy/girl” icons, height and age are by default, you just need to adjust it with the “more/less” buttons. My height is 165, age – 40, gender – female.
Ready. After viewing or setting personal data, you must press SET again, and the display will show the symbols 0.0. If you do not need to view personal data, then after selecting the user number, you should wait until the symbols 0.0 are displayed on the display. Everything is very convenient and logical!
Check for accuracy
Body weight is a variable quantity. There are times when you start to wonder if the configured device is working correctly? Here are some tricks on how to check your scale.
The main mistake that users make when checking scales for measurement accuracy is placing various objects on the platform. Electronic bathroom scales are configured for humans, so such a check will most likely contribute to damage to the device.
When purchasing, check where the readers are located. Sensors built into each leg will ensure accurate measurements.
You don't need to configure anything to get accurate readings. You only need to weigh yourself 5 times. The data obtained will help you calculate the error of your device: subtract the smaller one from the largest result. The permissible error should be no more than 400 grams.
If you are faced with the fact that the difference in the results is more significant, then the problem may be hidden in a malfunction of the sensors. One incorrect weighing can result in damage to the device.
The reset button, which is usually located on the back of the device, helps solve this problem. If this does not return the device to normal operation, then you should contact a technician or think about a new purchase.
Reset button on the back of the scale
Test 1. Measuring body weight
The result is 68.7 kg. Repeatedly, without shifting the scales, –69.1 kg. Weighing in clothes (jeans and T-shirt plus underwear). The measurement accuracy “up to one gram” declared on the manufacturer’s website contains, pardon the pun, inaccuracy. Empirically, we found out that the measurement accuracy of these scales is up to 100 g: no, for example, 68 kg 685 g, the display does not provide such an opportunity.
The scales turn on automatically: you just need to stand on the platform. Next, you should select one of the units of measurement - kilograms, pounds, stones. Our option is kilograms. The readings are clearly visible, the numbers and icons are clear, they don’t blur, you don’t need to change the angle of view to see them, but the display lacks backlighting, it’s a bit dark, and the numbers and icons are black.
Storage conditions
When using precision devices, it is important to remember their safety:
- Avoid temperature changes, high humidity, shock, dust and exposure to sunlight.
- Keep the scale away from heating appliances.
- To clean the platform, use a damp cloth; for the base, use a dry and soft cloth. Chemical or abrasive products are not recommended for use.
- Using and storing the scale in areas with high humidity, or liquid entering the case, can lead to destruction of metal parts and affect the accuracy of the measurement.
- You should not use physical force on the scales or jump on them.
Provide decent storage conditions for your device, and then it will serve you for many years.
