Construction stapler for the home: 7 tips for choosing and 6 best models

You can fasten one item to another during construction or repair using a hammer and nails. Many craftsmen often resort to using a special tool called a construction stapler. Mechanical models are valued for their low price and ease of use. In addition, they are quite reliable, since they have few parts that are subject to rapid wear and tear.

Principle of operation

The design of a construction stapler is extremely simple. Using muscle force (in mechanical models) or a motor (in electric models), the spring is raised upward. When the uppermost position is reached, the spring sharply expands. This force is enough to drive the staple/nail. When the lever is lowered, a new one replaces the old staple/nail and the process repeats.

It turns out that to hammer a nail you don’t need to make several targeted blows with a hammer - you just need to place the stapler where you need it and pull the trigger, your other hand remains free. It is convenient, fast and simple, which is why the tool has become so widespread. There is a misconception that a construction stapler can only hammer, but there are models that resemble a stationery stapler. They work with staples and are able to bend their legs, which is why they are used in the furniture industry and in decorative work.

A stapler is also called a stapler, tacker, nailer, staple gun, and staple gun.

The main advantages of a construction stapler:

nailing materials does not take much effort and time, the process is automated and is carried out many times faster;
the second hand remains free;
installation can be carried out in the most difficult to reach places;
vibration is not transmitted to the material, so you can easily work near glass elements without the risk of breaking them;
the variety of fastening elements gives the tool versatility;
safety. Unlike working with a hammer, you don't have to worry about hitting your fingers.
Read also: The design of a hammer drill - we study the nature of the impact force

Adjusting the stapler

To adjust the tool, you need to carefully study the instructions for use from the manufacturer. Using the screw, set the adjuster to the desired position and adjust the insertion depth of the bracket.

To do this you need:

Refill the magazine with a batch of staples.
Prepare material for fixation.
Mark the mounting location.
Apply the tape tightly to the marked joint.
Press the trigger without lifting the device from the surface.
As a result, you can hear a click and see the staple inserted into the product.

After practicing on rough material, you can begin the main work.

Scope of use of a construction stapler

The simple principle of operation and the ability to get rid of a hammer and nails allowed the construction stapler to become an almost indispensable tool for any construction and finishing work. As you already understood, this tool performs two main functions:

nails one material to another if the stapler is loaded with nails;
connects parts by bending the legs of the staples.

The scope of use of a construction stapler is very wide. Here are just a few examples of jobs where this tool can be used:

fastening furniture upholstery and making drapery;
creation of lathing and frames;
installation on the frame of sheet materials such as chipboard, fiberboard, plywood, tin;
installation of lining, siding;
installation of insulation, insulating membranes;
fastening of carpets;
installation of floors made of tongue and groove boards;
installation of bitumen shingles and roofing material;
attaching canvases to the frame;
fastening power cables;
assembly of wooden pallets;
arrangement of film greenhouses;
installation of glazing beads on wooden windows.

Electric staplers are much more functional than mechanical ones, but they are also more expensive. As a matter of fact, the type of energy that powers the stapler is the key criterion for dividing staplers into types.

What is a furniture stapler

A furniture stapler is a tool that secures or fastens parts using special staples. There are many other names for the device, such as a staple gun, staple gun, tacker, nailer, hammer.

Benefits of use

Thanks to the device, the material is quickly sewn together, and the appearance of the product is quite aesthetic. This is the basic principle of the drummer's operation.

The stapler has undeniable advantages when using:

You don't need to make a lot of physical effort. This is important when working in an unstable position, and thanks to the precise transmission of the impact, the likelihood of damaging the workpiece is minimal.
Since all the tacker's sharp consumables are hidden inside the box, this ensures a high degree of safety when working with it.
Operations with the device are carried out with one hand, which allows, if necessary, to support the product with the second hand.
The tool is comfortable to work in hard-to-reach and inconvenient places.
The device does not require special skills to use. There is no vibration or noise when using it.
Compared to working with a hammer, installation with a stapler is much faster.
The device is multifunctional; consumables can be not only staples, but also nails and self-tapping screws.
With proper use, the device will have a long service life. It is easy to maintain.

Before you start working with the device, you should know in what cases it is used.

What is it used for?

If you need to staple the paper, you can use a stationery stapler. To decide when to use a furniture stapler, you need to know what it can do.

With it you can:

Nail the material to plastic, wood or its derivatives.
Sew the equivalent parts of the product with the bend of the paperclip.

In addition, the striker has found wide application in manufacturing and construction.

Using a stapler you can perform the following operations:

drape the fabric;
install tongue and groove boards on the floor;
lay networks;
collect packaging containers;
fix the carpet;
fasten plasterboard sheets;
cover the surface;
attach film material to a greenhouse or greenhouse;
sew corrugated cardboard;
attach glazing beads to windows
install tiles and roofing felt.

Due to the fact that a furniture stapler is often used in repair and construction work, it is also called a construction stapler.

Mechanical stapler

A mechanical stapler has the simplest device, hence its advantages :

durability, because there is nothing special to break;
complete autonomy. Since no network connection is required, work can be done anywhere. You also don’t have to worry about the battery running out;
compactness and minimal weight, because the design does not contain batteries, wires, etc.;
simple maintenance. From time to time it is necessary to lubricate the spring;
low cost, therefore, for rare household jobs, as a rule, mechanical models are chosen.

A mechanical stapler is not always operated by hand - stationary models are used in production, the release lever of which is pressed by the foot.

The disadvantage of mechanical staplers is the need to apply force, i.e. You won’t be able to work with such a tool for a long time, so if you expect to pick it up often and use it to work with hard materials, then it’s better to look towards electric models.

We mentioned earlier that the heart of the stapler is the spring. In a mechanical tool, the spring can be of two types:

twisted or torsion bar . The main advantage is lower price. This design is used in hobby-class instruments, as it has a lot of disadvantages;
plate or spring. Free from all the disadvantages of a coil spring. It is easier to build, and its returns are lower. This type of spring is used in professional instruments. The downside is the higher price.

To reduce recoil in a mechanical stapler , the design includes a lot of solutions. The most common are handle linings with shock-absorbing properties. Manufacturers are also working to create cases that distribute the load more evenly across the entire palm. The lower the recoil and the lower the noise level, the more technologically advanced the tool you have.

Many models are equipped with a double strike function, shock force adjustment and other additional functions, which you can read about below.

Staples, nails and pins can be used as fasteners in a stapler. Most models are designed to work with U-shaped staples of a certain thickness and width, while the length of the legs can vary. More specific are staplers with a round groove in the working part; U-shaped staples are inserted into them. Scope of application: installation of power cables.

On the farm, and even for professional use, a universal tacker is more useful, which works with both different types of staples and nails.

Separately, as a type, it is worth noting staple hammers. The bracket flies out not when you press the handle, but when you hit the surface with the tool. The accuracy of fasteners suffers, but you can work faster and use less force, which is why for some areas of construction this is an indispensable tool.

Types by type of construction

Today, manufacturers produce strikers of various designs. To choose a tacker, you need to know its types, how they differ from each other, their parameters and application features.

The main types include:

mechanical;
electrical;
pneumatic.

Mechanical

The ease of use of a mechanical or manual stapler makes it widely popular among users. The advantage of the tool is mobility and independence from energy sources. The mechanism is activated by a spring when the trigger is pressed. Manufacturers produce household and professional models. Household hammers are used for small-scale operations at home.

How the tool works can be seen in the diagram.

Mechanical devices are made of plastic or metal. Devices made of plastic are intended for rare use; small staples are inserted into them; their cost is about 100 rubles. Devices made of metal are of higher quality, with different types of brackets and prices ranging from 400 rubles and above.

Electrical

For more professional and extensive work, an electric hammer is required. It connects to the electrical network or to additionally installed batteries. Just press the start button and the mechanism will start. Its functioning is directly dependent on the motor. This provides the device with increased impact force and high speed of work.

The device may fail as a result of overheating of the electric motor. In addition, the user’s movements are hampered by the presence of a wire and the considerable weight of the device.

Some modern models show the number of staples remaining inside the tool thanks to a built-in indicator.

Pneumatic

The pneumatic hammer is driven using compressed air, which ensures high performance and long-term operation without interruption. Instead of a spring, the mechanism is equipped with a pneumatic cylinder and a large magazine with staples or nails. A compressor is required to use it. Moving with such an additional unit is problematic.

The pneumatic stapler is practical, reliable and durable.

The tool is expensive.

Electric stapler

In an electric stapler, a motor does everything for you, which drives the spring. This means that you can use a stronger spring, which will give a stronger blow. It will be possible to use larger fasteners. Therefore, the scope of use of an electric stapler is much wider. The downside is dependence on the outlet or the need to monitor the battery charge. Batteries make the device heavier, and wires limit the working area.

The maximum staple length in mechanical staplers is 10-15 mm, in electric staplers it is 25 mm, but there are models that can drive pins up to 50 mm long. The performance of electric staple guns is up to 20-30 beats per minute. It is difficult to develop and maintain such speed in a hand tool.

Depending on the characteristics of their work, electric staplers are divided into:

network . They work from the network, i.e. they have a cord, which limits the operator’s mobility, so they often have to work with an extension cord. Such a tool can cause electric shock - special attention should be paid to how the manufacturer implemented the protection. Ideally, the case should be plastic with protective rubber pads on the handle, and the cable should have two layers of insulation;
A cordless stapler is more mobile, but due to the presence of a battery, it weighs more than a network device, and even more so than a mechanical one. On average, one charge is enough for 1000 shots. The second disadvantage after weight is the need to charge the battery and the possibility of it being completely discharged at the most inopportune moment. When purchasing, be sure to pay attention to the battery capacity, but it is better to divide the autonomy declared by the manufacturer by 1.5. It’s great if you have the opportunity to purchase a second battery. In terms of performance, cordless models are not inferior to mains models, and often surpass them, providing a rate of fire of up to 30 strikes per minute and the ability to drive nails up to 30 mm long.

The functionality of electric staplers is much wider than their mechanical counterparts:

the impact force can be adjusted stepwise or smoothly;
automatic reusable blow and blow with two staples make some types of work more efficient;
the shot function from pressing on the tip turns the stapler into a staple hammer;
many craftsmen will like the fastener removal function;
some models are equipped with a depth sensor;
For safety, safety locks and protection against accidental descent are provided.

The best cordless staplers

Cordless staplers receive power from a battery that is powered by an electric motor. The latter affects the impact mechanism. This does not require constant effort from the operator and helps to increase operating time. Here are some of the best models in this rating category with good reviews and characteristics.

BOSCH PTK 3.6 Li 0.603.968.120

Rating: 4.9

The first place in the rating here is occupied by a product from Bosch. The cordless stapler features an extended spout for easy precise positioning. The charging indicator shows how much energy is left in the 1.3 A/h battery. The model is extremely comfortable to hold. The handle is completely rubberized, and the trigger is designed for two fingers. The protrusion at the top of the body helps to rest well on the tool. The motor and feed mechanism are located at the bottom, which creates perfect balance. The side window provides good visibility of the fastener stock. Along with the stapler, the manufacturer supplies a battery and 1000 staples. In one minute the device is capable of making up to 30 blows. In reviews, owners report that the stapler easily penetrates fabric, leather, cardboard and chipboard.

In our opinion, the product is worthy of a place in the rating due to the presence of the Push+Release system. This means that the power tool will fire only when the nose is firmly pressed against the surface and the start button is pressed at the same time. If the spout does not rest, then the trigger button does nothing, and this increases protection against accidental operation.

Advantages

battery charging indicator;
extended spout;
viewing window to monitor store fullness;
1000 staples included;
battery capacity 1.3 A/h.

Flaws

high price;
weighs 800 g;
the force of impact is not adjustable;
The bulky body interferes with work in narrow niches.

Pneumatic stapler

These are the most powerful and productive devices. The design is somewhat different from the electric and mechanical tackers. Here, instead of a spring, a pneumatic cylinder is used, and the main working force is compressed air. The whole thing is activated by pressing the trigger or pedal. The last option is typical for stationary models.

The main advantage of pneumatic staplers is their highest productivity. These are devices that are used more in production than for construction and finishing work. However, recently you can increasingly find equipment of this type on construction sites. The downside is the need to use a compressor to obtain compressed air, which means additional costs and noise, and the hose limits movement. The operating pressure varies between models, but on average it is 4-8 bar.

The average productivity of a pneumatic tack is 60 staples per second, which is twice as much as that of an electric tool. This staple gun can hammer staples 50 mm or more in length. At the same time, the device is compact and weighs only slightly more than a mechanical stapler.

Like electric models, pneumatic devices are equipped with a number of additional functions, including adjustment of impact force, multiple impacts, etc.

Gross 41002

The TOP of the best mechanical staplers continues - Gross 41002.

Like the previous hero of this video, it has a body made of durable aluminum alloy, cast under high pressure and an ergonomic handle shape that allows you to give your hand an optimal position, which reduces fatigue during long work.

This stapler is often used in professional activities. Not only because of its reliability and lack of recoil during operation, but also because of its versatility. After all, it can accommodate staples of the 13th and 53rd types with a height of 6 to 16 mm, as well as nails of the 300th type with a length of up to 16 mm. It is also worth noting that this tool has an adjustable impact force, which allows it to be used with both soft and hard materials.

Among the design features of this model, it is also worth noting that the staples are bottom loaded, which speeds up the installation process and makes it easier to remove jammed staples. In addition, the tool has a viewing window to control the amount of consumables. And thanks to the elongated spout, this stapler leaves a small gap between the body and the working surface. This allows the worker to see exactly where to point the tool, which will be important when working in hard-to-reach corners and grooves. And also, in order to avoid spontaneous operation of the tool and for storage, this stapler is equipped with a mechanism for fixing the handle.

Overall, the Gross 41002 is a great, handy stapler for professional use.

Impact force adjustment.
Handle lock.
Viewing window.
Type of brackets type 13, 53.
For type 300 nails.
Staple size: 6 – 16 mm.
Nail length: up to 16 mm.

Fastener type

There are staplers designed to work only with a certain type of staples, there are those that can work with different staples, and there are models that shoot both staples, nails, and pins. Before purchasing, you should definitely pay attention to this characteristic, having previously assessed the nature of your own work.

The main types of fasteners used are presented in the table.

The most popular are U-shaped staples of type 53 and 140. Such fasteners are used for furniture upholstery (in this case, staples up to 8 mm long are suitable), as well as for various types of work with drywall, plywood, etc. (the length of staples can reach 16 mm).

When it is necessary to attach a cable, use U-shaped clamps . Where to use nails is probably already clear to everyone, but pins are used where it is necessary to obtain the most aesthetic fastening, without protruding heads.

The staples are usually collected in groups of 50-100 pieces, they are fastened together, which simplifies transportation and handling, but does not in any way affect the ease of separation from one another during operation. Staples may have sharp or blunt ends. The first ones fit into the material more easily, so you will have to put in less effort to drive them in.

Most staples are made of steel; brass is used much less frequently.

Classification of staples for staplers

Companies that produce staplers also produce staples for them. They all have their own size standards, so you can use consumables from other manufacturers. Knowing the sizes of paper clips, choosing them will not be difficult.

There are no universal consumables.

According to the material of manufacture

Staples are a consumable material for tackers, with the help of which the parts of the product are connected. Staples come in different types and have their own classification.

By type of metal they are:

Galvanized. Almost all foreign manufacturers make consumables from these raw materials, since they are the most durable and reliable fastening element.
Steel. These consumables are most often used in various fields of activity. Despite their considerable strength, they rust over time.
Aluminum. These are the most inexpensive, acceptable quality staples. Their advantage is that they are not subject to oxidation and corrosion, and their only drawback is low strength.
Copper. Like aluminum, they do not rust and are stronger, but their high cost limits their use.

It is easier to work with any paper clips if their legs are sharpened.

By hardness

During operation, consumables may bend and break. It depends on the material from which they are made and the type of work.

Classification of paper clips by hardness:

Simple. Aluminum and copper fasteners are soft materials that are best not used in areas of heavy loads or with hard parts. If these clips are hammered too hard, they will bend or burst under the load.
Red-hot. There are steel staples that have been hardened. They are distinguished by good material strength.
Very hard. The most durable are consumables made of stainless and galvanized steel.

By shape

To fasten product parts, paper clips of various shapes are used. With their help, the type of fastener is determined.

Varieties:

U-shaped. Arc-shaped staples secure cables and wires of various sections and purposes.
U-shaped. The most versatile group for attaching various elements.
T-shaped. Such consumables are not often used in practice, since they do not create a reliable connection.

Most furniture staplers only fit one type of staple. They are distinguished by the length of the leg, diameter, thickness and length of the back.

What else to consider when choosing a construction stapler?

When choosing a stapler, also consider the following nuances:

If you plan to work with materials of different hardness, be sure to choose a model with penetrating force adjustment . This option is provided in almost all mechanical staplers, but it is still better to clarify this point before purchasing. By turning the adjustment wheel, you can fine-tune the impact force so that the staple or nail is exactly flush with the surface, without sinking too much into it or rising above it. When working with pine, for example, you can use minimal force, but chipboard will require maximum force;
Naturally, it is worth taking into account the key characteristics of the device. These are the rate of fire, weight, cord length for network models, battery capacity for battery models, operating pressure for pneumatic models;
In devices operating from the network, the length of the cord is important. Minimum – 5 m. Once again we emphasize the importance of high-quality insulation;
The double strike feature allows you to almost completely avoid missing staples. In this case, if during the first blow the staple or nail is not completely immersed in the surface, the next fastener element is not supplied, but an additional blow is made to the staple;
all other things being equal, the best stapler will be with a collapsible body , i.e. assembled with screws rather than rivets. Such a tool is easier to maintain, since it can be disassembled at any time for cleaning or lubrication;
the smaller the angle between the lever and the body in the initial position, the more convenient it will be to work with the tool, especially if it is necessary to carry out fastening by weight;
if you need to fasten staples/nails at a clearly defined distance from the edge, then take a closer look at models with guide elements, stops and hooks;
Staplers with a protruding nose are well suited for working in hard-to-reach places;
The shockless release function makes transporting the stapler more convenient and safe. Thanks to it, the device can be simply folded, while inadvertent operation will be excluded;
The convenience of operation is also affected by the design of the store. More convenient will be the one where the magazine with fasteners is inserted, as in a stationery stapler. Push the magazine through the slot hole is not so convenient and fast. The magazine viewing window is a useful option that allows you to easily monitor its condition;
What distinguishes a household construction stapler from a professional one is not only the price and set of functions, but also the material used. Inexpensive appliances for home use are usually made of plastic (don't worry, plastic can be durable and reliable too). Professional models are made of metal - it is heavier, but much more durable. Plastic is used only as protective linings;
The name of the manufacturer is a guarantee of quality, and for staplers, like other equipment, this rule works 100%. Among the most famous brands we note Bosch, Intertool, Einhell, Metabo, Sparky, Sturm.

What to look for when choosing

It is important to approach the choice of a furniture stapler responsibly, since efficiency during operation and safe use will depend on it. We recommend that you familiarize yourself with the following quality selection parameters:

Frame. Be sure to pay attention to it before purchasing. The best case is one made of light alloys rather than plastic. Metal devices are highly resistant to external mechanical damage and are able to operate without internal breakdowns for a long time.
Construction type. It can be whole or composite. We recommend that you first pay attention to collapsible models. They make it easy to carry out minor repairs, thanks to which you can extend the service life of the unit several times.
Handle shape. The handle must be made in an ergonomic shape and fit comfortably in the hand. The handle, which has a special rubber coating, deserves special attention.
Store color. It should be transparent, because this way you can always control the number of staples and determine the time of replacement.
The presence of a stopper allows you to warn about accidental pressing of the button and is an indispensable thing in any stapler.

TOP 6 best construction staplers

STANLEY Light Duty 6-TR150L

Inexpensive and quite functional stapler. It works from muscular strength and has an adjustable impact force. The body is made of aluminum and equipped with ergonomic handles. The stapler can accommodate both staples (size 53, length 6-14 mm) and nails (size 300, length 12-15 mm). The manufacturer has taken care of convenient access to the store. Even professional builders praise this stapler. The only complaint is the inability to work with nails without heads. Costs about 1400 rubles.

Gross 41005

A distinctive feature of this model is the spring spring, which makes it much easier to interact with the device. The stapler works with nails (8-16 mm, type 300, 500) and staples (8-14 mm, type 36, 53), and is equipped with a mechanism for adjusting the impact force. Thanks to a small protrusion at the base of the device, you can work with it in the most difficult to reach places. The model costs about 1,200 rubles and is very popular with users.

BOSCH HT 14 0.603.038.001

Another good option if you need a mechanical stapler. The model is as simple as possible, but has an adjustable impact force, can drive staples (4-14 mm, type 53) and nails (up to 14 mm, type 41). Users note that the design uses a coil spring. Cost – about 1200 rubles. A little expensive for this model, but if the name of the manufacturer is important to you, then you can consider the device, because it is assembled of very high quality.

BOSCH PTK 14 EDT 0.603.265.520

A high-quality network stapler that provides productivity up to 30 staples/min. The magazine can accommodate staples (6-14 mm, size 53) and nails (11.4-14 mm, size 48). The device weighs a lot - 1.1 kg. The noise level is average – 95 dB. There is an adjustment of the impact force, an indicator of the degree of filling, and the ability to hit with two staples at once. However, some complain that the model jams the other half of the staples in the store. The cost is about 6,000 rubles.

Hammer HPE2000C PREMIUM

The device is powered from the mains, has a decent rate of fire (30 strikes/min), works with staples (15-25 mm) and nails (15-32 mm). There is an adjustment of the impact force. Price – about 4200 rubles. Masters complain that sometimes there is a shortage.

Rating TOP 7 best furniture staplers for home

We have prepared for you a selection of the best staplers from around the market. The selection was made based on technical characteristics and user reviews. Our rating includes the following devices:

Novus J165EC.
Novus J-105 EADHG.
Bison ZSP-2000.
Black&Decker KX418E.
Hammer Flex HPE 20.
Hammer Flex HPE10.
RedVerg RD-ES53.

We invite you to take a closer look at each of these positions and get acquainted with its main advantages and technical parameters.

Novus J165EC

The rating opens with a powerful electric stapler. It carries out its work using a network and is used as the main tool for finishing and upholstery work. Nails (16-25 mm) and staples (15-26 mm) are provided for use. The store is equipped with a special window that allows you to control the number of remaining staples.

Power	230 W
Nutrition	220V network
Maximum frequency	20 beats/min
Weight	1.64 kg

copes well with finishing and upholstery work;
you can use nails and staples;
there is a window on the magazine that allows you to control the number of parts;
it is possible to regulate the impact force of a smooth type;
comfortable handle;
fastening of consumables with high reliability;
a fuse is provided to prevent accidental operation;
The thin and long nose of the stapler is very convenient to use.

not detected.

Price: from 5,000 to 7,500 rubles.

furniture stapler Novus J165EC

The previous stepper from this manufacturer served me for about five years, so I decided to purchase a more modern analogue from the same company. The new model turned out to be quite compact in size and effective in practice. Totally enjoyed using it. The big old sofa filled up in a few minutes and even my arms didn’t get tired.

Novus J-105 EADHG

The main purpose is interior work and decoration. The device is considered universal of its kind since it uses ADH staples 6 – 14 mm. It has a modest weight and compact dimensions, making it very convenient to work while suspended.

Power	230 W
Staple width	10.6 mm
Magazine capacity	50 pcs
Weight	1.2 kg

the elongated working part allows you to reach hard-to-reach places;
a universal system for loading nails and staples is provided;
independent adjustment of the force and depth of impact;
when the brackets are arranged in parallel, a distance type stop is used;
connects to the network via a cable (3 m).

not found.

Price: from 3,000 to 4,200 rubles.

furniture stapler Novus J-105 EADHG

I bought a stapler for furniture due to ongoing renovations. In order to save money, we decided not to throw away the old furniture, but simply reupholster it. The stapler turned out to be very convenient to use. The power cord is quite long, so you don’t have to worry about the distance and don’t have to use an adapter. The handle is equipped with a comfortable coating that prevents slipping in the hand. The brush itself does not get tired during long-term use.

Bison ZSP-2000

A stapler with a high power rating is most often used as the main tool for stitching various types of materials. The Bison weighs several kilograms and is designed for a wide range of work, as it uses 15-30 mm nails and 55 type staples.

Staple width	6 mm
Net	220 V
Weight	1.6 kg
Beat frequency	20 beats/min

low weight (1.6 kg);
the magazine holds about 50 staples and nails;
20 beats per minute;
The impact force can be changed independently using an electronic switch.

not detected.

Price: from 3,100 to 4,200 rubles.

furniture stapler Zubr ZSP-2000

I found a wonderful stapler in one of the construction stores. My wife and I recently started renovating our house, and I decided that we couldn’t do without a furniture stapler. It allows you to turn an old and tattered chair into a brand new one in a matter of minutes, as if it had just been bought in a store. Management is very simple and does not require any special knowledge. Hands do not get tired even during long work.

Black&Decker KX418E

The model is available in red color and uses staples with a width of 10.6 mm, thanks to which the device is used in various fields of activity. The engine of this tool has high power, which is why it produces twenty blows in one minute.

Power cord length	3m
Nutrition	220V network
Magazine capacity	64 pcs
Power	1500 W

high engine power (1500 W);
produces twenty beats per minute;
the magazine holds 64 staples;
the user is given a choice among seven digits, thanks to which the fastening of the smallest parts can be adjusted;
high sight accuracy.

not found.

Price: from 2,000 to 3,900 rubles.

furniture stapler Black&Decker KX418E

Recently I decided to transform all the upholstered furniture in the apartment and change its upper material. I bought the styles I liked at the fabric store and immediately headed to the hardware store. There, the salesman advised me to buy this model because it is efficient in operation and is quite light in weight, so it will be much more convenient for me to operate it. I really liked my purchase and I don't regret it at all. I advise everyone to buy, because the device has been tested in practice!

Hammer Flex HPE 20

With this device you can quickly and securely attach fabric, paper and various wooden tools to any type of surface. The model is equipped with an ergonomic handle that weighs only 800 grams. Connection to the network occurs thanks to a two-meter cable.

Power	45 W
Beat frequency	20 beats/min
Nutrition	220V network
Weight	0.8 kg

ergonomically shaped handle with low weight (800 g);
You can use staples and nails in your work;
The power cable reaches two meters in length;
There is an indicator of the remaining number of staples.

not detected.

Price: from 1,000 to 2,000 rubles.

furniture stapler Hammer Flex HPE 20

A friend advised me to buy a furniture stapler of this model. At first I was not sure about the reliability of this type of fastening, but after the first use I felt a noticeable difference. At home, I covered the shed with a special fabric that did not let heat out using this stapler. It does this job well and securely nails the fabric to the wood. Even if you pull hard, the staples will not fall out. My next experience was covering furniture with new fabric. It does woodwork well, but sometimes the button gets stuck.

Hammer Flex HPE10

The electric type stapler is sold in green color and is used as the main device in construction work. The device copes well with fastening any type of fabric, cardboard, paper, wire mesh. Capable of operating at speeds of 20 beats per minute.

Power	650 W
Number of staples	300 pcs
Staple width	11.4 mm
Magazine capacity	100 pieces

unusual appearance;
protection against unintentional activation is provided;
rubber handle helps prevent slipping in the hand;
The warranty is for one year.

not found.

Price: from 1,200 to 1,800 rubles.

furniture stapler Hammer Flex HPE10

Good stapler. I have already tried it in all possibilities, so I can confidently recommend it for purchase. Recently I decided to start fixing up old furniture. I didn’t want to throw my favorite sofa and several armchairs into the landfill, so I decided to reupholster them. The stapler helped me complete this task in an hour. Good fastening is guaranteed. What was most pleasing was the presence of a useful security feature that allows you not to worry about the device being left unattended. The power cord is quite long and allows you to comfortably work around the perimeter of the entire room.

RedVerg RD-ES53

The last device in our rating can be classified as semi-professional equipment, since it is often used in repair and construction work. An electric stapler supports staples and nails during operation. The magazine capacity is 80 pieces and allows you to work without replenishment for a long time.

Weight	0.7 kg
Nutrition	net
Consumables	staples and nails
Maximum beat frequency	20 beats/min

supports staples and nails;
a special indicator for the number of staples is provided, allowing control of the consumption of elements;
maximum number of hits – 20;
The length of the power cable is two meters;
comfortable handle shape;
low weight (0.7 kg).

not detected.

Price: from 1,000 to 1,600 rubles.

furniture stapler RedVerg RD-ES53

An attractive and tempting price stapler caught my eye in one of the construction equipment stores. At first I didn’t want to buy it because I didn’t plan to renovate it, but then I rethought the state of the furniture at the dacha and decided to try to update it with its help. The use is simple and does not pose any difficulty. My wife also liked the stapler; now she can use it to decorate various elements of the pantry and sheds.

Types of staplers

The first step is to decide what type of staple gun you want. According to the type of driving force, construction staplers are:

Mechanical. They are operated by hand force, have low productivity, and a small number of staples that can be “tucked” into it. With such equipment it is quite difficult to work with hard materials - you have to make a significant effort. But mechanical staplers are small in size and weigh little, which allows you to work in awkward positions. Their low price is also attractive, although there are models with a rather high price tag.
Electrical. The staple flies out when the trigger is pulled, but the trigger mechanism is powered by electricity. There are models that run on mains power, and others that run on batteries. Naturally, productivity is higher than that of manual staplers, but prices are significantly higher, especially for cordless staplers. Also larger in size. Moreover, for models powered by mains power, the cord interferes and limits movement, while for battery-powered models, the weight and bulky handle cause inconvenience - the battery is usually attached to it from below. But the physical effort is minimal.

How does a stapler work?

After charging the staples, they begin to work. The stapler is taken in the hand, brought to the objects that are planned to be connected, and the trigger is pressed.

The staples are driven in after the trigger of the device is pressed. This releases the striker, which tears the staples out of the row and drives them into the material or cardboard with an impact. At the moment of hammering, a characteristic loud click is heard; by the sound you can determine that the staple is clogged.

If the device does not work or the staple is stuck, the stapler does not make a click, you need to check the magazine with staples and repeat the operation.

Which stapler is better to choose?

There is no definite answer to this question. The choice may depend on many factors:

purpose of the stapler;
buyer's budget;
required performance;
duration of work.

The best solution is to take your time! Look again at all the models on our website and decide which one suits you best.

We also invite you to watch a video that will help you choose a tool!

Video - How to choose a stapler

How to choose?

There are many different reviews, articles and some kind of material displaying some aspects that need to be taken into account when choosing and further purchasing a laptop stand. We will try to answer this question specifically and without unnecessary water. See item descriptions below.

First, you need to decide for what purpose you want such a device. After awareness, you need to consider the point of autonomy and power connection. Of course, we recommend cordless staplers, but their cost is much higher than conventional models.

Secondly, pay attention to the indicated power of the device . This item affects many factors. Here we also included the maximum frequency of beats per minute and the type of consumable.

The final point is the type of staples and their width , which is very important when using this type of device. We recommend choosing for yourself: 10.6 mm or 11.4 mm. We hope we helped with your further choice.

Impact force and other characteristics

The defining technical indicator of this device is the impact force. The speed of operation of the tool, as well as the quality of the work performed, depends on it. Obviously, pneumatic models have the best performance, followed by electric options, and mechanical furniture staplers have the least impact force.

The stapler is capable of hammering staples of different lengths. To calculate the force of its impact, it is enough to study the technical data sheet of the model. It should indicate the recommended staple lengths. The longer the maximum length of the staple used, the higher the impact force will be.

But before choosing a stapler, you need to understand what it will be used for. If you do not plan to use the tool regularly, then high impact force is not a determining factor. In addition, different lengths of staples may fit differently into different types of wood.

In addition to the main characteristics of the product, it is also worth paying attention to the available additions that greatly facilitate the use of the device:

narrow tip - used to improve accuracy and aim;
an adjusting screw for changing the impact force is convenient for working with different surfaces;
It is better that the handle is equipped with rubberized inserts so that the tool does not slip out of your hands during operation;
if the staple magazine is equipped with a transparent window, such a stapler will be easier to use;
The handle stopper is also important for safety of use: it will not allow accidental pressing.

When choosing a stapler, hold it in your hands to understand whether it is comfortable to use. It often happens that even a high-quality tool does not fit in your hand.

Nuances of choice

Before choosing a product, you should decide on its purpose. As already noted, it is important to decide for what purposes the tool will be used - large-scale or household. Manual models are suitable for household needs; pneumatic models are suitable for constant work.

In addition, you need to understand where the device will be used: on the street or in the house? When choosing an electric option for working outside the home, a problem may arise: how to use a furniture stapler without a network? In this case, you will have to additionally purchase battery packs, which significantly affect the weight of the tool.

When choosing a device for everyday work at home, use the following recommendations:

pay attention to the mobility of the product - it should not depend on extraneous factors, free access to the device should be provided at any time;
when choosing a tool, study the information on how to use a stapler so that there are no difficulties when working independently;
If you plan to use the device for a long time, discard the mechanical analogue in favor of electrical options. Using a manual stapler for a long time leads to inconvenience. A product with a motor will do the job for the master.

When it comes to production speed, pay attention to a professional furniture stapler.

When choosing it, follow these tips:

any workshop has a compressor, so choose a pneumatic version of the tool - it works much faster than its analogues and allows you to hammer thousands of staples in a short period of time;
in production they often work with various materials: plywood, chipboard, beams, so before choosing a furniture stapler, study the types of staples used.

If there is such a possibility, then ask a consultant in the store to test the product by hammering several staples into a piece of thick plywood.

Comparison table of the presented models

We suggest that you familiarize yourself with the comparative table of the reviewed devices.

Model	Power, W)	Maximum beat frequency (bpm)	Staple width (mm)	Power cable length (meters)
Makita DPT353Z	–	–	–	battery
Metabo TaE 3030	–	20	4	2,6
Bosch PTK 14 EDT	–	30	11,4	2,5
Novus J-105EADHG	230	20	10,6	3
Black&Decker KX418E	1500	20	10,6	3
Hammer Flex HPE20	45	20	11,4	2
Kolner KES 650	650	30	10,6	2

Advantages of working with a stapler

Small construction tools are increasingly in demand among both professionals and amateur DIYers. They are happy to buy a staple gun for home and leave positive reviews about the devices

working with a stapler does not require heavy physical activity;
saves time;
Can be used with one hand;
you can work anywhere;
it will be possible to bind hard-to-reach parts during repairs;
safe;
durability.

Even a child who collects crafts can handle the device, but adult supervision is required.