How to connect two wireless headphones to your phone

How to connect wireless headphones to your phone

Users of iPhone or other mobile phones that support Bluetooth technology can safely purchase wireless headphones, as connecting them to the device will not be difficult. The principle of combining a smartphone with additional equipment wirelessly is almost the same.

Depending on what operating system is installed on the device, access to settings may be different. Therefore, a user who decides to figure out how to connect headphones to a phone, in addition to this article, should use the smartphone manufacturer’s instructions. It shows step by step the process of accessing settings and the principle of changing phone settings in order to connect two devices wirelessly. Next, the connection method will be described using the example of an iPhone and a mobile phone with the Android operating system installed.

The instructions will be useful for users of iPhones of different models that allow you to connect additional devices via Bluetooth wireless communication. The connection principle is approximately the same for both products specially designed for the iPhone and for equipment popular among users of smartphones from other manufacturers.

Recommendations: How to charge wireless headphones

How to connect headphones to TV

, How to use wireless Bluetooth headphones

How to enable pairing mode on headphones with an Android smartphone

Before pairing, you need to fully charge the headset, then:

1. Turn off your device.
2. Turn on Bluetooth on your smartphone.
3. Activate pairing on the headphones. The process will vary depending on the brand, but most often it involves pressing and holding a key on the headset (or on two ears at the same time, in the case of TWS).
4. When the light on the headset begins to flicker, search for Bluetooth devices on your phone. The headset will most likely have the same name as its model, but if you cannot identify the device (this happens, for example, with budget no-name devices), simply turn off the headset and see what is missing from the list.
5. Having identified the device, click on its name and connect, following the prompts of the smartphone.

For some TWS models, communication is activated by pressing a key on the case, or simply by opening it.

Connection process

1. Turn on your wireless headphones. The included instructions should tell you how to turn on the device and start the hardware discovery mode to establish a wireless connection. Typically, headsets have an indicator that lights up in different colors, depending on the mode you are currently in.

2. On your phone, enter the mode for changing operating parameters. That is, the user needs to find the “Settings” button on the screen, go to the menu, find “Wireless Networks” in it and turn on Bluetooth.

3. After a short wait, the smartphone will find the connected equipment and, depending on its settings, will or will not prompt you to enter an access password. If the user has not changed the default settings, the wireless headphones will connect without asking for a password. The user will learn how to change or find out the default password from the instructions included with the headset.

4. By going to the Bluetooth settings settings, you can see all the devices connected via this type of wireless connection. The user should see connected wireless headphones in the list. If they are not there, then communication with the device has not been established, so you should check the setup sequence and compare it with the sequence specified in this manual.

5. After a successful connection, the user will see a special icon in the status bar of the smartphone indicating that wireless headphones are connected.

Owners of mobile phones running the Android operating system sometimes encounter problems connecting two devices wirelessly due to incorrectly set parameters. Problems can arise not only with combining two devices, but also with playing music.

i7 TWS Specifications

i7 TWS headphones are a kind of “plugs”. The shape allows them to fit securely in the ear without causing discomfort. Made of plastic that is pleasant to the touch and has no nicks or other imperfections. Even when you move, for example, on a morning jog, they remain securely in one place.

Other advantages and technical characteristics:

• The device has built-in voice prompts in English;
• You can also pair the i7 with two devices at the same time;
• It is possible to dial the last contact you called without interacting with your smartphone;
• The headphones have a charging port. Full charging cycle - 80 minutes;
• Built-in battery with 60 mAh, which allows you to work without interruptions for up to 4 hours;
• There are 2 operating modes: normal, economical;
• Supports Bluetooth version 4.1;
• Weight - 4 grams.

You can listen to music within a radius of 10 meters from the playback source. The built-in Smart Multi function allows you to connect two i7 TWS headphones to two devices. This way you can easily invite your girlfriend or friend to listen to music. An additional case allows you to extend listening to up to a day. If you use only one earphone, you can listen to music 2 times longer - 8 hours.

Depending on your mobile device, connection instructions may be different. In some cases, you can connect i7 TWS in the following way:

1. When the headphones flash in different colors, press the control button on one of them 2 times;
2. One should stop blinking and the color will change to blue;
3. On your phone, connect Bluetooth and activate the device.

This may be useful: Why the microphone on the headphones does not work.

Setup process

1. turn on the headset;

2. activate data transfer mode via Bluetooth on your phone;

3. enter the wireless settings and start the search mode for new devices;

4. connect the found device by clicking on its name in the list of found equipment;

5. enter the code, if required;

6. It is important that the sound goes not to the built-in speakers, but to the connected headphones; you need to go into the phone’s sound system settings and cancel the “Sound during a call” function;

7. By enabling the “Multimedia Sound” function, the user will be able to listen to music through wireless headphones.

Not all wireless headphone models support multimedia streaming. Such restrictions are introduced at the software level, so if desired, the user can easily bypass them by installing the appropriate software.

7 best wireless headphones for your phone, tablet or smartphone

Instructions for setting up sound transmission via Bluetooth

1. Establish a wireless connection between the phone and headphones.

2. Download and install the program.

3. Launch the application and switch the broadcast of the audio stream to the headphones.

The disadvantage of using software is the high level of energy consumption. The battery will drain quickly as wireless data transmission is always active. To save battery, you will have to regularly disable the application manually.

What devices are compatible?

Shared listening works with all AirPods and select Beats headphones:

• Powerbeats
• Powerbeats Pro
• Solo Pro
• Beats Solo 3 Wireless
• Beats Studio 3 Wireless
• Powerbeats 3 Wireless
• Beats X

And the sound source is all devices compatible with iOS and iPadOS 13:

iPhone

• iPhone SE (2nd generation)
• iPhone 11
• iPhone 11 Pro
• iPhone 11 Pro Max
• iPhone XR
• iPhone XS
• iPhone XS Max
• iPhone X
• iPhone 8
• iPhone 8 Plus

iPad

• Pad Pro (12.9 inches, 2nd generation and later)
• iPad Pro (11 inches)
• iPad Pro (10.5 inches)
• iPad (5th generation and later)
• iPad Air (3rd generation)
• iPad mini (5th generation)

iPod touch

• iPod touch 7th generation

Problem solving

Usually, after updating the software, various malfunctions occur in the operation of connected devices. If, after updating the operating system, wireless headphones do not appear in the list of devices available for connection, try following the instructions below.

Instructions for troubleshooting software failures:

1. Reboot the operating system using the corresponding button on the screen.

2. If that doesn't help, reset the system to return to factory settings. Before resetting, you should save all data that is important to the user. When you return to factory settings, all user data will be permanently deleted.

The last global way to solve all problems is to flash the device. This method will get rid of all software glitches, but if done incorrectly, it can cause more harm than good. Therefore, if all the above measures did not help set up wireless communication, then contact a service center.

Topic materials: 10 best Chinese wireless headphones, 11 best headphones for your phone

, 20 Best Wireless Bluetooth Headphones , 5 Best ASUS Headphones

5 Best Awei Headphones

5 Best Creative Headphones

, 7 Best Sennheiser Headphones , 9 Best Beats Headphones , No Sound from Headphones

It would seem that everything is simple, but not everyone succeeds. We'll tell you everything about wireless headphones for Bluetooth phones: how to connect and what to do if you can't do it.

It would seem that everything is simple, but not everyone succeeds. We'll tell you how to connect a wireless earphone to your phone and what to do if it doesn't connect.

More and more people prefer comfortable wireless headphones to traditional wired ones. If you have not yet chosen the ones that suit you, we recommend that you familiarize yourself with our selection of the best options.

You can connect such headphones to a smartphone via the Bluetooth protocol: the corresponding module is now available in even the simplest phones.

How to synchronize headphones with each other?

Synchronization of parts of the headset is necessary if the sound is missing from one of the “ears” or comes with time delays. In addition, the owner of the device may try to connect a wireless gadget without studying the instructions in detail. Then in the smartphone settings he can see only one part - the main one (R). Or two devices with the same names, or with different ones, can be placed here, but simultaneous connection will not be available.

To synchronize the headphones with each other, you need to perform a rollback procedure to factory settings (erase data about them from your smartphone):

1. If the connection has already been made, you need to find the TWS device in the list of Bluetooth devices, tap on it and select “Forget”.

2. Take the gadget out of the case and press the buttons on both parts for a long time (10-15 seconds). A sound signal and indication (“red-blue” or “red-white”) will notify that the reset to factory settings has been completed.
3. Place the headphones back into the case.

Now the gadget is ready to activate collaboration.

General rules

• The corresponding module responsible for the wireless connection (Bluetooth, NFC) must be enabled on the smartphone.
• For headphones, you may need to activate pairing mode.
• It is advisable that the devices be in line of sight at a distance of no more than 10 m.

Wireless headphones are the best choice for those who play sports. It is advisable that they be protected from moisture - like, for example, this model Awei A885BL.

Remember this!

Before performing all the manipulations, you should remember the icon in the image above. Meet the AirPlay icon, a technology responsible for the interaction of Apple devices with each other when playing content: music, movies, photos, etc.

Lock screen

Command centre

Apple Music

You will find this icon on the lock screen, in the control center, in the Apple Music application and much more.

How to connect headphones via Bluetooth

The procedure for connecting wireless headphones to a smartphone is very simple. It only needs to be done once: then, when devices appear in the blue-tooth connection coverage area, they will connect automatically. So, how to connect to wireless headphones from your phone?

1. Turn on the headphones and Bluetooth module on your smartphone.
2. Go to the phone menu, find the Bluetooth tab , enter it.
3. You will see a list of devices that are within range of the signal. Find the model name of your headphones in this list : most often the manufacturer gives their gadgets this name.
4. Click on the device name and the smartphone will try to establish a connection with it. After this, you will most likely request a password (pairing code).
5. The most popular factory password is 0000 . But the headphone manufacturer may provide another one: in this case, find it in the instruction manual.
6. After entering the correct pairing code, the devices will connect via Bluetooth . If the headphones have an indicator light, it will light up or flash.

Some headphones come with a charging case. Sometimes the cases indicate a specific place where you need to place your smartphone. An alternative is to remove the “ears” and carry out the standard procedure.

Can't connect headphones via Bluetooth: what's the reason?

Despite the simple connection algorithm, users periodically encounter problems when trying to connect their phone and wireless headphones. The reasons are usually banal: we have compiled a list of the most popular ones.

• The headphones are turned off or are not in pairing mode. It’s trite but true: many people forget to turn on their “ears,” and the smartphone, naturally, cannot find them among the available devices. This often happens with simple models without light indication.
• The headphones have exited connection mode. As a rule, the connection mode only works for a certain time: for example, 30 s. If you've been fiddling with your smartphone for too long and the time is up, most likely you won't be able to find the device in the list. Pay attention to the indicator light and try to understand whether the connection mode is activated.
• The distance between devices is too large. For a reliable connection, two gadgets must be at a distance of up to 10 m in the line of sight. If suddenly you are trying to connect from the next room through a couple of walls, you may not succeed.
• The headphones were called by a mysterious name. This is often encountered by those who bought cheap wireless “ears” on Aliexpress: the Chinese can name the model in the most unpredictable way, including denoting it with hieroglyphs. In this case, you will have difficulty finding the device in the Bluetooth list when connecting. The recipe is simple: turn off the headphones, press the “Search” or “Refresh” button on your smartphone. One of the devices should disappear. Turn on the gadget again and update the list - watch for a new line to appear. It is your device.
• The headphones' battery is dead. Another popular scenario for those who have been fiddling with the connection for too long. Many models do not warn you in any way that the battery is running low. In others, an “alarm indicator” turns on, that is, the LED begins to blink red or at an increased frequency. If it doesn't light up at all, it means it needs charging.
• You have rebooted your smartphone. If you turned off your phone (for example, when boarding a plane) or rebooted it (for example, after an update), you will have to connect again; Bluetooth devices will no longer connect automatically. The technique is the same as what we described earlier.

Why did my phone stop seeing Bluetooth headphones?

But first, let's look at the reason. The fact is that most modern wireless headphones have a single mode of operation. That is, they can connect to a smartphone separately without a second module. This is convenient if you want to listen to music or talk on the phone and at the same time be aware of what is happening around you, for example, when driving. This is especially true for in-ear headphones, which completely block the ear canal from the penetration of extraneous sounds.

So, the transition to the one-by-one operation mode occurs automatically if you take your headphones out of the case not simultaneously, but after a short period of time - even 15-20 seconds is enough. The fact is that immediately after taking out their case, TWS headphones begin to look for a pair via Bluetooth. And not finding it, they switch to mono mode. This often happens by accident - you take out the first one, think about something, then you take out the second one - and it no longer works. As a result, sound only goes into one ear.

How to connect two wireless headphones to a phone?

A logical question: what to do if you want to listen to music together from the same source? I would like to be able to connect two wireless headphones to my smartphone at once. Alas, this is not so easy to do, or rather “by default” it is simply impossible to do. But there are some tricks.

Many manufacturers provide for connecting second headphones to the first ones of the same model. For example, the Marshall Major II Bluetooth provides a hybrid connection: they can be connected either wirelessly or using a regular cable. But there is this option: you connect the “ears” via Bluetooth, and the second copy to the first using a cable. This way you can, for example, watch videos or listen to music together.

Smartphone and tablet users have been using Bluetooth headsets for a long time, and we're not just talking about busy businesspeople who constantly receive calls. This convenient device allows you to avoid distractions while driving and driving. The connection process is easy, but you may have some difficulties the first time. We have prepared simple instructions that will help you quickly connect the headset.

Step-by-step instruction

The process goes as follows:

1. Turn on the headset and proceed to setting up the tablet.
2. On the home screen, swipe from the top of the display to the bottom - the performance panel will appear. Here you need to click on the Bluetooth icon to activate it.
3. After this, an automatic search for devices will begin. IMPORTANT!
   This instruction is relevant for a headset that is connected to the tablet for the first time.
4. The gadget will perform a search and give you a list of available devices if there are several of them in your range.
5. Select your headset and click the Connect
   .
6. The device will ask for a PIN code. You can find it on the packaging of your wireless headset.
7. As experience shows, almost all devices have a standard PIN code of 0000.
8. Now you have a stable connection, you need to configure it. We go into the connection and find the option Sound during a call
   .
9. If you skip this setting, you will not hear the person who called. You can also check the box next to the Media Sound
   . After this, the headset can be used as simple headphones.

Detection Mode

If you purchased Hands Free, then there is a chance that the headset will not be found by the tablet without first activating the detection mode. The method for starting this mode depends on the specific model. On some devices you need to hold down the power button until the LED indicator blinks. There are models with a wheel. It needs to be put into discovery mode.

In any case, you can study the instructions to find out how to enter discovery mode. The manual also points out other features of the headset that the user may encounter. You will also need this mode to connect a headset that was previously used on other devices - turn off the mode and start it again, the headset will reboot and your gadget will be able to detect it.

In order for a connection to be established between the Bluetooth headset and the device you are using, you must complete the pairing procedure (instructions for pairing devices are available in the user manual). The condition for creating such a pair is that the devices are within reach of each other; for a Bluetooth headset, such a zone is usually no more than 10 m, if there are no solid objects between them.

When you turn it on for the first time, many headsets turn on in pairing mode - that is, you can immediately search for them in the phone’s Bluetooth settings for further pairing. You can enter a headset from almost any manufacturer into pairing mode in the same way:

1. When turning on the headset, press and hold the power button (or other specific buttons - read which ones in the instructions) for 10 seconds, thereby entering it into search mode;

2. Wait until the LED starts flashing intermittently (or, on the contrary, lights up continuously). In pairing mode, the headset will be discoverable for at least 30 seconds;

3. Turn on your phone to search for Bluetooth devices. In the settings, specify the option so that the phone is visible to everyone. Next, on your phone, select search for devices - the identification process begins. In your case, when searching, your phone should detect a Bluetooth headset in its environment. Once detected, it is stored in the phone's memory. You then decide to “pair” both devices for interaction and activate the corresponding wireless headset entry on the searching device (mobile phone). As a result, your phone tries to contact the headset and transmits its unique network address to it.

Reference:

Each Bluetooth device has its own unique 48-bit network address, similar to the MAC address of the network adapter in a regular PC, which identifies devices.

That, in turn, adds this address to its list of network environments, but before access to its resources is opened, it requests a digital password. The pairing code should be indicated in the instructions for the headset, but for the vast majority of headsets the code is the same - 0000. If the password is correct, interaction will be established.

Note:

The pairing established between the phone and the Bluetooth headset is specific only to these two devices. Once paired with one phone, the headset becomes “invisible” when other phones search for it. Therefore, if you change your phone or bluetooth headset, the pairing procedure for these devices is repeated.

You need to connect wireless Bluetooth headphones to your phone in two steps:

• When you connect headphones to your phone for the first time, you need to pair them;
• For the second and subsequent uses, there is no need to pair, just turn on the headphones in the usual way.

I will show you the process of connecting wireless Bluetooth headphones to a phone using the example of Xiaomi Mi5 based on the Android operating system, as well as on iPad and Windows Phone. On all other Android phones this is done exactly the same, but the visual style may be very different from what you see in the screenshots, keep that in mind.

Connecting Bluetooth headphones on Android

:

Connecting Bluetooth headphones to Windows Phone

:

Connecting Bluetooth headphones on iOS

:

Connecting wireless Bluetooth headphones on Android

Unlock your phone. Now bring up the quick access curtain, this is done by swiping down from the top edge of the screen. Next we need to go to the “Settings” menu of the phone, in my case I need to click on the icon that looks like a gear, in your case there should be something similar. Or you can look for the desktop app called Settings and click on it.

Step 2

We are in the phone settings, now we need to find the “Bluetooth” menu. In my case, it is on the first screen in the off state. Enter it.

Step 3

As you can see, the Bluetooth module is disabled. You need to turn it on by clicking on the switch on the right. If you already have Bluetooth turned on, you don’t need to do anything, proceed to the next step.

Step 4

Bluetooth is now turned on. I've paired several wireless headphones to my phone before, and they're all available in the device list. If the headphones are on this list, this means that the phone knows their parameters and is ready to connect to them at any time as soon as they are within the range of the phone’s Bluetooth transmitter. Now we will pair the phone with Semmheiser M2 IEBT headphones, it doesn’t know anything about them yet and that’s why they are not on the list.

Now pick up your wireless headphones.
When connecting Bluetooth headphones to the phone for the first time, we need to carry out the initial pairing. In the vast majority of cases, in order to enable pairing mode on the headphones, you need to hold the power button for up to 10 seconds. Make sure the headphones are turned off, and then hold the button. If you did everything correctly, the indicator on the headphones will start flashing quickly in different colors, this means that the headphones are in pairing mode. Now look at the phone screen Step 6

After a few seconds, the name of the wireless headphones that you want to connect to your phone should appear on your phone’s screen in the “Available Devices” section. As soon as you see the name of the headphones, click on it. The pairing mode of the two devices will begin automatically.

Step 7

As soon as you clicked on the name of the new headphones, the pairing process began. You don't need to do anything at this point, just wait, it usually only lasts a couple of seconds.

Step 8

Everything is ready, now the name of your headphones should move to the “Connected Devices” section, and the status should be “Connected”. This means that the headphones are connected to the phone and all sound from the phone is now heard in the headphones.

That's all, we connected wireless Bluetooth headphones to a phone based on the Android operating system. The algorithm remains exactly the same on any other operating system, be it iOS on Apple's iPhone or on Windows Phone. All connection steps remain exactly the same, only the external design differs. I think now it won’t be difficult for you to connect headphones to any other phone.

Once you have paired your phone and headphones, you don't need to do it anymore. Next time, just turn on the Bluetooth module on your phone and turn on the headphones, they will connect to each other automatically within a few seconds.

How to reset wireless TWS headphones?

This is done in two steps:

1. You need to remove (forget) the headphones on the devices to which they were connected. This is a required step regardless of the manufacturer and model of headphones.
2. Reset using the button on the headphones or on the case. The button can be either mechanical or touch. Usually you need to hold down the button on the case or headphones (on the right and left at the same time) and hold it for 20-50 seconds. But depending on the model, the method may differ. Later in the article I will show several popular methods in more detail.

Step 1

Open the Bluetooth settings on your phone, tablet, laptop or other device and remove the headphones from the list of paired devices (forget this device). I show it using the iPhone as an example. On Android devices it looks about the same.

On computers, you can remove headphones in the Bluetooth settings.

Remove headphones from all devices that are nearby and to which they were connected. If both headphones appear in the list (for example, with “_L” or “_R” in the name), then delete both.

Step 2

Reset settings with button.

If you have instructions specifically for your headphones, then they most likely describe the reset process. Even if the instructions are in a language you don’t know, you can translate it using your phone (just point the camera, through the same Google translator). You don't have to try different options and look for the right combinations.

Method 1: universal solution

This solution is suitable for most similar headphones. I show the example of Xiaomi Redmi AirDots and Earbuds Basic.

1. Charge your headphones.
2. We take both headphones out of the case and take them in our hands.
3. Press and hold the buttons (mechanical or touch, depending on the model) for about 5 seconds. Usually the red light comes on and goes off. Let's release the buttons.

   
   We turned off the headphones. Sound signal "Power Off". On some models you can skip this step.

4. Again simultaneously press the buttons on the headphones and hold them for about 20-50 seconds. The time after which the reset will occur and how the indicators will behave at this moment depends on the specific model. It's not always the same. But as a rule, the white indicator flashes first, and then the blue/red (white/red) indicator flashes alternately several times.

   
   To be sure, keep the buttons pressed for about a minute.

5. Place the headphones in the case for 10 seconds.

6. We take the headphones out of the case and wait for them to synchronize with each other (as a rule, the indicator starts blinking (white, blue/red, blue - it depends on the specific model) only on one headphone, the main one). This means that the headphones are ready to be connected.

   
   If the indicators on the headphones do not blink, then press the buttons for 5 seconds to turn them on.

7. Reconnect the headphones to your phone or other device. Photo for example. You may have a different headphone name and a different phone number.

8. If it doesn’t work out the first time, be sure to try a few more times.

Method 2: do a reset by holding the buttons in the case

On the same Xiaomi Earbuds (on an updated or older version, I don’t know) that I have, the reset occurs only when we press the buttons on the headphones and they are in the case. Without removing the headphones from the case! If the universal method did not work for you, and the design allows you to press the buttons when the right and left earbuds are in the case, then try this method.

1. Charge your headphones.
2. Without removing the headphones from the case, press the buttons and hold them for about 30 seconds.

   
   At this moment, look at the indicators. On my Xiaomi Earbuds, the indicators light up red for about 5 seconds, then blink white several times, then actively blink white/red, light up red again, go out and light up red again. This takes 15-20 seconds.

3. Remove the headphones from the case and wait until the left and right headphones synchronize with each other.
4. Connect to your device via Bluetooth.

Method 3: button on the case

On some TWS headphones, you need to reset using the button on the case. On the same AirPods, or Xiaomi Mi AirDots Pro. As I understand it, this method is most often found on expensive models.

1. Recharge your headphones by at least 10-20%.
2. Place both headphones in the case.
3. Press the button on the case and hold it for 20-40 seconds.

   
   Pay attention to the indicator. On AirPods, for example, the reset occurs after the indicator blinks orange several times. But don’t forget that it works differently on different headphones.

Detailed instructions for AirPods: connecting AirPods to iPhone: does not see, does not connect, one earphone does not work.

Method 4: if the buttons are touch sensitive

If you have touch buttons on your headphones, then the reset is done in much the same way as with regular buttons. For example, let's take Xiaomi QCY T3, Xiaomi Haylou GT1. The instructions are suitable for different headphones with touch buttons.

1. We recharge the headphones.
2. We take them out of the case.
3. Press and hold the touch button on the headphones (sometimes you only need to press one) for 5 seconds to turn them off. Usually they light up red and go out.
4. Press and hold the touch buttons for 20-40 seconds. Usually the red/white light flashes, but not on all models.

   
   Or like this (using the example of a good copy of AirPods):

5. We put the headphones in the case and close it. We take out the headphones and wait 5 seconds until they synchronize. If they do not turn on automatically, then hold down the sensors for 5 seconds.
6. Everything is ready, you can connect!

Sometimes on headphones with touch buttons, you need to press the sensor several times to reset the settings. For example, make 4 clicks on the touchpad. On the Motorola Vervebuds 100, for example, you need to touch the touchpad once, then press and hold it for 5 seconds.

Method 4: using the example of TWS I7s

I have some very cheap Chinese I7s headphones lying around. I decided to show them using their example. If I understand correctly, then you don’t need to do a Reset on them at all. Just turn on the headphones by holding the buttons for 5 seconds and they automatically connect to each other. After which the indicator on one earphone actively blinks red/blue. This means that they can be connected. I found information that the main earphone is assigned by double pressing the button. But perhaps on older or newer models, or on i9s, i10, i11, i12, i30 it all works differently.

1. We take out our I7s or a similar model from the case.
2. Turn them off by holding the buttons pressed for 3-5 seconds (the red indicator lights up and goes out).
3. Press and hold the buttons at the same time for 30 seconds.

4. Turn on the headphones by holding the buttons for a few seconds.
5. After synchronization, we connect them to the phone.

An important point: it doesn’t always work out the first time. Be sure to try again several times. If the methods described above do not work, your headphones behave differently, then describe in the comments the problem why the reset does not work and indicate the model of the headphones. I'll try to suggest a solution.

Connecting wireless Bluetooth headphones on Windows Mobile 10

Step 1

Unlock your device. Call up the quick access panel to the settings by swiping down from the top edge of the screen. We need to find the “All parameters” item, click on it. Alternatively, find the Settings app in the list and tap on it.

Step 2

You are taken to the phone control panel. Now find the “Devices” item. Bluetooth, camera" and click on it.

Step 3

You are in the phone device menu. We are interested in the Bluetooth module, find it in the list and click on it.

Step 4

In my case, Bluetooth is disabled. If you also have it disabled, turn it on by pressing the switch. If you already have Bluetooth turned on, proceed to the next step.

Step 6

After a while, the name of your headphones should appear in the list of devices. In our case, Momentum M2 IEBT headphones appeared on the list. As soon as you see the name, click on it to complete pairing.

Step 7

After you click on the name of the headphones, the pairing process will begin, you can see it in the screenshot above.

Step 8

That's it, your headphones are connected to your phone and are completely ready for use. Next time you no longer need to go through the pairing procedure again, you can simply turn on Bluetooth on your phone, turn on the headphones and they will establish a stable connection automatically within a few seconds.

How does wireless headphone syncing work?

Normally, the left and right earbuds automatically pair with each other via a Bluetooth connection. When pairing for the first time, the earbuds send signals to each other to calculate the time it takes for the data to complete a round trip between the right and left devices.

At the first conjugation, the time for the data transfer cycle between the headphones will be calculated

When there is a lot of noise (interference) around you, the time spent on such a cycle may be longer. Because your headphones are forced to “wait their turn” to transmit a signal. Once the exact data cycle time is known, it will be divided in half. From now on, your earbuds will know how long it takes for them to transfer data between each other.

Once the counting is complete, the headphones will be ready for use.

In most cases, headphones are connected to the phone through one “main” earphone (usually the right one - R). It does extra work because it has to manage both earbuds' phone communication and compensate for signal delays between the right and left earbuds.

Typically, the right earbud is used to connect both earbuds

The battery on the right earbud drains a little faster than the battery on the left. When a music signal comes from the phone, the right earbud immediately sends the signal to the left earbud. It also makes a slight delay while music is playing to ensure synchronous playback of the track on the right and left earbuds.

Connecting wireless Bluetooth headphones to an iPhone or iPad running iOS

Step 1

First of all, we need to get into the “Settings” of your phone or tablet. To do this, find an application on your desktop called “Settings” and click on it.

Step 2

Now in the left column you need to find the Bluetooth adapter menu, it is located almost at the very top of the list. Enter it.

Step 3

In my case, Bluetooth is disabled. If you also have it disabled, turn it on by clicking on the switch on the right.

Step 4

After you turn on Bluetooth, you will see a list of devices with which your gadget is already familiar. Or you won’t have any devices in the list if you’ve never connected wireless headphones or other devices to your phone or tablet before.

Now take your headphones, make sure they are turned off, find the power button and hold it for up to 10 seconds. This will allow the headphones to enter pairing mode. Then proceed to the next step.

Step 6

A few seconds after you have activated pairing mode on your headphones, their name should appear in the list of detected devices. As soon as it appears (in my case, the Momentum M2 IEBT headphones appeared), click on it to start the automatic pairing mode.

Step 7

If a progress bar appears to the right of the device you clicked on, this means the automatic pairing process has started. You need to wait a couple of seconds and the device will be ready to use.

Step 8

That's it, pairing is completed successfully. Your headphones' status should change to "Connected", which means they are already working with your iPhone or iPad. Enjoy superior sound. Next time you no longer need to go through the pairing procedure again, you can simply turn on Bluetooth on your phone, turn on the headphones and they will establish a stable connection automatically within a few seconds.

Why do the headphones desync and why do a reset?

If you don't need this information, you can skip straight to the solutions (later in this article).

Most TWS headphones work as follows: there is a main earphone, the master (depending on the model, it can be left or right) and there is a second earphone, the slave. When we take the headphones out of the case, the headphones synchronize with each other via Bluetooth. The second earphone (which is the slave) is connected to the main (master). After which we connect the main earphone to the phone, computer, etc. There are headphone models where both the right and left earbuds can act as the main earphone.

Desync very often occurs when the headphones are connected incorrectly. When we connect to a phone or other device, it is not the main earphone, but the slave one. For example, when we want to use only one earphone. After this, the headphones cannot connect to each other and only one works. And on the device, two headphones may be displayed in the list of Bluetooth devices. Sometimes the name may contain a letter that indicates the right and left earphone (for example, “name_R”, “name_L”). Screenshot for example (your situation may be different):

After this, you can connect one earphone, but not both together. More precisely, you can connect both, but only one will play. Which of course doesn’t suit us.

It happens that desynchronization of TWS headphones occurs due to some kind of failure, when we do not put the headphones in the charging box after use, we use one earphone, or after they are completely discharged. A desync problem usually has nothing to do with the device. Be it a Windows computer, an Android phone, or an iPhone.

Resetting TWS headphones allows you to re-sync. We delete them on the devices we connected to, reset the settings, turn them on, and the headphones synchronize with each other and start working as a pair. This usually solves all synchronization and connection problems. This method can also be used when the earphone simply falls off, the indicator does not light up and does not respond to button presses.