Error code on the Indesit washing machine f06

If error code F 06 appears on the display of the Indesit electronic washing machine, you can try to figure out the problem yourself. This error means that there are problems with the controls and the machine does not respond to commands.

The electromechanical model SMA Indesit displays error F6 by flashing the “Additional rinse” and “Soaking” indicators. The “Quick Wash” - “Super Wash”, “Ironing” - “Dirty Laundry” lights may also be on. The user may notice that the Lock indicator is blinking.

What to do and how to restore the machine's operation?

What to do to fix the problem

You can solve the problem and eliminate the F6 error in several successive steps. You need to immediately decide what happened to the Indesit washing machine.

The machine does not respond when turned on

Check that there is electricity in the room and that the traffic jams are working properly.
Check the outlet and power cord with a multimeter. If external damage is obvious, replace the wire.
If the machine is connected via an extension cord, inspect it for defects.
Check the functionality of the buttons and control module. If any violations are visible, then you cannot do without the help of a professional technician. You may need to replace the Start button or triac.

A video about replacing the control module will help you understand the intricacies:

Random blinking of indicators

To remove error F06, unplug the washing machine and reboot for 15-20 minutes. If after turning on the error did not reset, and the code was displayed again, then check the wiring. In some Indesit models, wires come into contact with internal parts, which leads to their malfunction.

What to do in this case, how to fix everything? Check the cable yourself with a tester for damage. If necessary, replace it.

Check the capacitors as shown in the video, perhaps the problem lies there:

The washing machine turns on but does not start washing

How to fix the problem and return the machine to working order?

Check the loading hatch. If it is not closed tightly, the protective mechanisms will not allow water to run.
Make sure the door is energized.
The current is flowing normally, but the hatch is not blocked? The locking device needs to be replaced.
Observe how water flows into the tank. Are you hearing any extraneous sounds or is there complete silence? This means that water flows with difficulty, and there is nothing to do the washing with.

When the Indesit washing machine shows error F06 on the display, the main thing is to pay attention to the repair. As practice shows, you can troubleshoot problems yourself.

Error F06 in the Indesit washing machine - control failure, Error code on the Indesit washing machine f06.

What to do and how to restore the machine's operation?

Minor glitch

Ariston household appliances are reliable and of high quality, but sometimes require routine repairs, which in most cases can be done independently. A minor failure occurs when the operating instructions are not followed (use of hard water, clogging).

Error F06 indicates a problem with the panel keyboard or control handle. A malfunction code may appear on the display after loading laundry and selecting a washing mode. In this case, the machine may not even draw water?

A malfunction is possible at the end of operation of the device after the completion of the program, and in rare cases during the technological mode of washing, rinsing, spinning. Depending on the model, the error will be signaled by blinking of the power indicator, the end of the program lamp or the temperature control lamp.

If, after loading the laundry and selecting the washing mode, the machine does not fill the tank with water and the hatch is not blocked, then a single malfunction of the electronic control unit is possible.

To eliminate the system malfunction, reboot the device by disconnecting it from the power supply for 15-20 minutes.

The software failure can be resolved by rebooting the machine. To do this, turn off the power supply to reset the set modes and start the device. After such manipulations, work will resume as normal. To prevent recurrence of the malfunction, you should avoid increasing the humidity in the room where the equipment is located.

An error code occurs when the sunroof is not locked. To eliminate the malfunction, you should check the tightness of closing the loading compartment and eliminate the mechanical interference between the device body and the hatch.

If, after completing the wash, code F06 appears on the display or the word DOOR flashes, then a possible cause of the breakdown is the failure of the hatch locking mechanism. In this case, it is recommended to replace the damaged part of the device.

Error F6 is possible when the specified washing program is interrupted in case of broken contact or damage to the wiring to the loading hatch door lock. To troubleshoot the problem, you need to check the contacts and wires.

What to do to fix the problem

You can solve the problem and eliminate the F6 error in several successive steps. You need to immediately decide what happened to the Indesit washing machine.

The machine does not respond when turned on

A video about replacing the control module will help you understand the intricacies:

Random blinking of indicators

What to do in this case, how to fix everything? Check the cable yourself with a tester for damage. If necessary, replace it.

Check the capacitors as shown in the video, perhaps the problem lies there:

The washing machine turns on but does not start washing

How to fix the problem and return the machine to working order?

When the Indesit washing machine shows error F06 on the display, the main thing is to pay attention to the repair. As practice shows, you can troubleshoot problems yourself.

Article source: https://cosmo-frost. ru/oshibki-stiralnyx-mashin/indezit/oshibka-f06-v-stiralnoj-mashine-indezit/

Error f06 Indesit - Indesit washing machine and error code f06 with explanation, Error code on the Indesit washing machine f06.

How to fix a breakdown and make repairs yourself

What should I do to solve the problem?

A simple way is to turn on the rinse mode, and then check the operation of the washing machine.
Disconnect the Indesit machine from the network and reboot for 20 minutes, resetting the errors.
Ring a bunch of resistors on the control module with a nominal value of 180-220 kOhm.
Check the sensor for resistance with a tester. At a temperature of +20 degrees, the resistance should be at least 20 kOhm.
Inspect the electrical circuits of the heating element relay.
Inspect the control board.

Why doesn't the washing machine heat the water?

What else can a malfunction of the indesit ACM manifest itself with error f 03? The answer is simple: the washing machine does not heat the water.

Many users, when taking out washed items, feel that they are cold. As a result, they decide that the Indesit machine has stopped heating the water. You can determine the correct temperature by touching the glass of the loading hatch 15 minutes after the start of the cycle. If the hatch is cold, there is a problem.

What do trouble codes mean and how can I reset them?

Incorrect installation of the program

Indesit washing machines provide different operating modes. Check if the temperature of the selected program is too low. Then you need to increase it to correct the situation.

Level sensor clogged

During the washing process, the sensor tube may become clogged with threads, small particles, and hair. As a result, the module does not send a signal to heat the water. Therefore, water flows into the washing machine, but does not heat up. A video on the topic will show you how to fix a breakdown or replace a part:

Open circuit of the heating element

How to check if the circuit is working properly:

Carefully inspect the wiring that leads to the heating element. It must be intact, without defects. Constant vibration can lead to chafing of elements.
Replace the damaged wiring or solder the damaged part.

If everything is fine with the circuit, the reason lies in the heating element. Failure occurs as a result of long-term use and scale. What to do:

Ring the heating element using a multimeter (tester).
If the heating element is faulty, replace it.
To replace, remove the back panel of the Indesit machine, loosen the fastenings, and disconnect the wires.
Remove the damaged heating element and replace it with a working one. Here is a detailed video:

Damage to the heating sensor (thermostat)

The thermostat is responsible for timely connection and shutdown of water heating. A sign of a malfunction is a long or, conversely, too fast wash. To replace:

Remove the back panel.
Remove the bracket and disconnect the contacts.
Using a screwdriver, remove the shield and loosen the fixing nut.
Remove the faulty one and install a new sensor.

Damage to the heating element relay or programmer

This is part of the control module. It can break as a result of overvoltage or manufacturing defects. A breakdown requires calling a repairman.

You can try to resolve error f03 yourself, or you can call a technician to repair Indesit.

Decoding

The Indesit f06 code indicates a control error. The command buttons on the panel do not respond to user actions, Indesit does not start the wash cycle. There are several reasons, and to restore the working capacity of the washing machine you will have to perform a series of sequential measures.

In some cases, the Indesit f06 error appears due to the door not being tightly closed after start-up. The protective circuit issues a command to prohibit operation, and the washing stops. If the problem cannot be resolved by tightly slamming the hatch, check the microswitch of the locking connection (locking device).

Closing the door lock (hatch locking device) of the Indesit washing machine

Methodology

The resistance between the neutral contact and the rest is measured. When testing a working device, the multimeter will show 0 or ∞ (closed/open). Does not correspond, changing the lock cannot be restored.

What to do

Restart SMA

A standard procedure recommended when complex household appliances equipped with electronics fail.

Method: unplug the power cord from the outlet, pause for 20 minutes, and turn on the washing machine again. If the result is negative, continue searching for the cause of error f06 Indesit.

The idea is that the failure of electronics to obey user commands is caused by circuit failures. This occurs during voltage surges, sudden short-term shutdowns, interference (nearby power lines, powerful transmitters), and stray currents. This simple action in 40% of cases helps to eliminate washing machine error f06 - after all, in most high-rise buildings, grounding is not provided in apartments.

Check the power supply parameters

The manufacturer Indesit guarantees the trouble-free functioning of the AMS, provided that it is supplied

220–240 V/50 Hz. Inconsistency between U or f values is the cause of error f06. It is easy to verify the quality of the energy supply by turning on any imported household appliance equipped with electronics. There are no malfunctions, everything is normal, continue to look for the “culprit” of the problem.

Assess the condition of the power circuit

Error f06 Indesit is called:

Elimination of such defects does not require the help of a professional; error f06 with Indesit can be removed independently.

Perform loop diagnostics

Assess the condition of the wires in the Indesit washing machine

Test the book. "Start"

Power button (ON-OFF) Indesit

A broken switch is the reason for the lack of control of the washing machine, error f06. Tested by pressing: closing the contacts indicates serviceability. If the multimeter shows R=∞, replace it.

Inspect the boards

Repairing Indesit electronics yourself will only add problems. Diagnostics of the control boards (the “brain” of the washing machine) and the display panel are carried out on a specialized stand that simulates the operation of the AMS in various modes. Without circuits, equipment, or practical experience, testing modules at home is an unpromising activity.

It’s also not worth following the advice of “nugget repairmen”. In Indesit washing machines of different years of manufacture and series, the circuits and layout of electronic boards are different. And it’s not a fact that a hint from the outside will help remove error f06 and not harm. According to service technicians, up to 80% of users completely destroy their boards by unprofessional intervention in the electronics of the SMA; it is no longer possible to restore.
Expert opinion

What to pay attention to

Error f06 cannot be removed by the measures taken, contact a workshop certified by the manufacturer. Diagnostics at the stand and professional troubleshooting will cost several times less than buying a new board.

If you have experience in correcting errors F06 of Indesit washing machines , write in the comments to this article, we will try to consider your option and analyze it in detail in this or one of the following articles . Send photos and videos with comments and descriptions.

Article source: https://fixbroken. ru/oshibka-f06-indezit/

Error F06 on the Indesit washing machine, Error code on the Indesit washing machine f06.

Reasons for lack of heating

Error “F03” can be suspected on an Indesit machine even before it appears on the display. There is a clear symptom - the washing machine stops heating the water. This will be indicated by cold things in the drum after the end of the cycle or an unheated hatch door 15 minutes after start. Then it becomes clear that the machine does not heat up to the set temperature. To repair the unit, we first carry out diagnostics. There can be quite a few reasons for the lack of heating.

User error. Probably, the mode with the minimum temperature was initially selected. The solution is to control the cycle with a new program.
Clogged pressure switch. During operation, the sensor tube becomes clogged with threads, hair and small debris. This leads to incorrect recognition of the level of the collected water; more precisely, the pressure switch does not give a signal about the dialing, which is why the system cannot give the command to heat.
Power supply break on the heating element. We carefully inspect the wiring connected to the heater. If there are signs of damage, we replace it.
Faulty heating element. Larger damage caused by scale or wear. The answer to “what should I do?” simple: we call and, if necessary, replace it with a working analogue.
Broken temperature sensor. Remove the back cover, remove the bracket and free the wiring. Next, use a screwdriver to unscrew the shield and nut and change the sensor.
A failed heating element relay or programmer. The reason is overvoltage and manufacturing defects.

There is no point in trying to repair the heating element relay or board on your own. These mechanisms are very complex and sensitive, and the experiment will result in an expensive replacement. It is better to immediately contact a specialist.

Interesting:

Error F03 on Ariston washing machine
Gorenje washing machine error codes
Kaiser washing machine errors
Miele dishwasher errors
Daewoo washing machine shows error E2
Error codes for different dishwashers

Reader comments

Share your opinion - leave a comment

Code identification

Is it possible to deal with the problem with your own hands and return the washing machine to working capacity? To solve the problem, you need to figure out what this error means. Code F06 indicates a problem in the control of the washing machine, as a result of which the machine does not respond to user commands or does not start washing. That is, the washing machine simply does not respond to button presses and does not start the selected mode.

The Indesit machine, which does not have a display, displays an error by flashing the lights. The “Extra Rinse” and “Soak” indicators are lit. The “Quick Wash” and “Super Wash” lamps are allowed to glow. The “Ironing” and “Dirty Laundry” indicators may be on. Also, an attentive user may notice the blinking of the “Lock” LED.

What to do when faced with such a problem? How can I return my Indesit machine to working order? Whether it is possible to cope with the breakdown yourself, or whether you will have to call a specialist, we will analyze further.

Let's identify this code

If the display of the Indesit washing machine displays error “F03”, then the machine cannot heat the water to the required level. The time allotted by the system for heating ends, the control board does not receive information about the completed command and pauses the started cycle. Washing can only continue at low temperatures. The washing machine displays code “F03” when one of two malfunctions occurs:

Error “F03” can also appear on machines without a display. Then the “Revolution” and “Quick Wash” or “Revolution” and “Extra Rinse” lights will flash simultaneously on the dashboard. Another unkind symptom is the cold glass of the hatch door during the washing phase. To correct the situation, you first need to accurately determine the cause.

Refuses to turn on

How to correct the situation if the user’s attempts to turn on the automatic washing machine remain unsuccessful? What if the washing machine refuses to start?

First of all, you should check whether there is electricity in the apartment; perhaps the power in the house is turned off. See if the plugs are knocked out. You can also check the serviceability of the outlet itself and the power cord with a multimeter. If defects are noticeable upon visual inspection of the power cord, the cord must be replaced.

If the washing machine is connected to the network through an extension cord, it is worth inspecting it for damage. Next, you should check the serviceability of the buttons themselves on the control panel. If everything above is in order, you will have to inspect the main control module of the washing machine. If defects or broken connections are clearly visible on the board, you need to invite a professional.

It will not be possible to repair the “brain” of the washing machine without certain knowledge and experience; you can only ruin the part, and this will lead to higher repair costs.

The technician will diagnose the control module, replace the triac if necessary, solder the tracks, etc.

Lights flash randomly

In some cases, a simple reboot of the equipment helps to eliminate the F06 error. Unplug the washing machine for about 20 minutes. If this manipulation does not help, and the washing machine gives an error again, it is better to check the wiring. In certain Indesit models, the wires pass in close proximity to the internal parts of the machine. Such close proximity leads to their damage. You can check the wiring with a tester, and if it is damaged, replace it yourself.

It makes sense to check the capacitors on the control board of the washing machine. Sometimes, this behavior of the “home assistant” is caused by burnt-out capacitors, namely 10v680uf, 10v1000uf, 10v470uf. Diagnostics of elements and their replacement will help eliminate the problem.

Can't start washing

It happens that error code F06 appears after the wash has started. What to do in this case? First, you should check whether the drum door is closed tightly. If the hatch is not completely closed, the protective system will not allow water to enter the drum, but will pause the wash, displaying error F06. It may be necessary to replace the UBL to fix the problem.

Diagnosis and replacement of the locking device is quite simple:

Before disconnecting the contacts, take a photo of the wiring diagram!

The tester switches to resistance measurement mode. The probes of the device are applied to the neutral contact and phase. If a three-digit number is displayed on the multimeter screen, it means the lock is intact. Afterwards, the probes are applied to the neutral and common contact. If the device shows one or zero, everything is in order. A faulty UBL must be replaced; repairing the lock is impossible.

Probably, code F06 appears because the machine cannot draw water, and there is simply nothing to wash with. Then make sure that your water is not turned off or the shut-off valve is not closed. In most cases, you can fix the error yourself if you pay close attention to the “symptoms” of the breakdown.

What do the error codes for Indesit washing machines without a display mean?

Most modern Indesit washing machines are equipped with a display. If a part breaks down, an error code appears on the screen, allowing you to identify it.

However, models of previous years were produced without a screen, but this does not mean that the equipment cannot give a signal that this or that breakdown has occurred.

The Indesit washing machine without a display also produces error codes, but they are encrypted in the form of a set of signals. Read the article on how to decipher them.

Code identification

Refuses to turn on

How to correct the situation if the user’s attempts to turn on the automatic washing machine remain unsuccessful? What if the washing machine refuses to start?

It will not be possible to repair the “brain” of the washing machine without certain knowledge and experience; you can only ruin the part, and this will lead to higher repair costs.

The technician will diagnose the control module, replace the triac if necessary, solder the tracks, etc.