The washing machine does not spin - possible causes and methods for eliminating them

Technical reasons

In some cases, the lack of spinning indicates quite serious technical problems with the Indesit AGR, which require professional diagnostics and repair. We are talking about those cases when the machine has stopped spinning clothes due to the failure of one of the most important elements of the unit - as a rule, in such situations the error indicator lights up.

Such breakdowns include a number of defects.

• Malfunction of the device that records the number of drum revolutions - the tachometer. This is one of the most common technical faults. A broken sensor transmits incorrect data to the control module or does not contact it at all.
• The second reason may be due to a malfunction of the SMA electric motor. In order to diagnose its breakdown, it is necessary to disassemble the machine, remove the motor, carefully unscrew and inspect the commutator brushes and coils. In most cases, the cause of malfunction of Indesit machines is wear and tear of the electrical networks - this leads to the motor slowing down and the spin cycle becoming weak.
• Another probable cause of failure is the failure of the pressure switch, that is, the sensor that monitors the water level in the drum. If the machine control unit does not receive information about whether there is water in the tank, then it does not start the spin cycle.
• A common cause is a faulty water heating element. Thus, excessive scale formation on the heating element or its burnout often becomes a signal to the control unit about the need to pause the spin cycle.
• And, finally, the reason is of a technical nature - a breakdown of the electronic control system of the machine itself.

In some cases, the laundry not only remains unwrung in a small volume of water, but seems to float in it. This happens when the SMA does not drain the water from the tank. There may be several reasons for this:

• the pipe, drain hose or drain filter is clogged;
• The drain pump has failed.

Why doesn't it wring out

There are 10 main reasons why a washing machine does not spin clothes:

1. The procedure for squeezing items is not provided for every washing mode. Perhaps the user chose this one, which is why he did not receive dried laundry. Some models of washing equipment have the ability to turn off the spin cycle. The housewife, through ignorance or inattention, could have done this, and as a result, the clothes will remain wet after washing.
2. If the washing machine has the ability to determine the weight of the items in the drum, the spin cycle will not start if it is overloaded. This can also be attributed to a user error, since it exceeded the permissible amount of laundry recommended by the instructions for loading.
3. Squeezing will not occur if there is an imbalance in the drum. This situation occurs in several cases: too few things are loaded into the drum (for example, only 1-2 towels), the laundry is not distributed throughout the drum, but is concentrated in only one part of it.
4. The Indesit automatic machine does not press if the drive belt is stretched. This happens on those machines that have served for more than 1 year.
5. Problems in the drain pump lead to poor squeezing. If it breaks during the washing process, water will remain in the drum. The sensor responsible for the water level will not notify the control module that the push-up can begin.
6. A breakdown of the pressure switch leads to disruption of the squeezing cycle. A pressure switch is a device that determines the liquid level in a tank.
7. If the tachometer does not work, the laundry will be too damp after washing. This sensor is responsible for the rotation of the drum. Without its signal, the control module does not start the drying mode.
8. Washing machine motor failure.
9. Worn brushes can cause problems with spinning. Indesit washing equipment operates without replacing brushes for 10-12 years.
10. The problem with squeezing may be due to a malfunction in the control unit. This unit controls all devices of the washing unit.

There are other reasons that the machine does not perform all its inherent functions. But only a specialist can determine whether there is a problem.

Causes

Let's consider the sources of lack of spin:

• the program options are set incorrectly;
• exceeding the permissible weight of the laundry;
• imbalance in the drum;
• the drive belt is stretched;
• the drain pump is faulty;

• the pressure switch has failed;
• tachometer is broken;
• short circuit in the motor winding;
• the brushes are worn out;
• failure of the electronic control module.

Let's look at each reason in more detail.

Washing machine breakdown

Machine breakdown

But, probably, the most tragic and undesirable thing for housewives is the breakdown of the Indesit washing machine. If the unit previously successfully washed clothes, but at one point stopped coping with its functions, it is necessary to find out the cause of the breakdown. Why doesn't the Indesit washing machine spin out clothes?

There may be several reasons:

• Drive belt stretch.
• Tachometer malfunction.
• Engine failure.
• Burnout of modules in the electronic board.

Control board and motor

Engine failure

If you suspect that the electronic board is broken, it is recommended to call a technician immediately. If the Indesit washing unit does not rinse well, does not spin clothes and does not drain water, it is better to contact a specialist. A control module failure requires professional repair. In order not to cause more harm and completely damage the unit, it is not recommended for ordinary people to repair the board themselves.

Likewise, you should not try to repair the motor of a washing machine. A common cause of device malfunction is a broken winding. In this case, the technician will recommend replacing the failed unit with a new one. As an alternative, you can give the motor for rewinding. But it is impossible to answer whether the Indesit machine will function after such repairs.

Why doesn't the INDESIT washing machine spin out clothes?

• » Most often, the INDESIT washing machine does not spin, not because of any malfunction, but because of our absent-mindedness or insufficient knowledge of the operating rules. Let’s read the instructions again and make sure that our machine does not need any repairs.
• » Insufficient machine load. In this case, it is difficult to evenly distribute things in the drum space. And to avoid excessive vibration, our machine simply reduces the number of drum revolutions.
• “The spin cycle may be insufficient or not at all if we are washing one large item. During the washing process, the blanket or blanket bunches up into a large lump, and the result is no spin. There is a little trick: together with a large item, we load several smaller items into the drum of the INDESIT washing machine. The goal is still the same: uniform distribution of laundry throughout the drum volume.
• » The device that controls the drum speed has failed. The engine may be damaged. The INDESIT program setting may fail. It’s better not to try to fix such problems yourself – turn to a professional!
• » The water drain is clogged. This malfunction can be easily eliminated if, after first turning off the machine, you clean the drain pump.
• “And again – our absent-mindedness... Maybe we turned off the spin function when starting the machine? Let's check this too.

Indesit washing machine does not spin: why and how to fix it?

The spin cycle in the Indesit washing machine may fail at the most unexpected moment, while the unit continues to take in and drain water, flush out the washing powder, and perform washing and rinsing. But every time the program reaches the spin cycle, the equipment immediately freezes.

If you are familiar with these signs, then the information we have prepared for you will probably be useful.

Invalid program

Some washing machines have a special spin-free mode. Applicable when selecting the following programs: wool, silk, down jacket or gentle wash. These modes may vary depending on the model. Therefore, it is necessary to study the instructions for your sample, in particular, the description of the programs. In advanced brands, the drum rotation speed can be independently adjusted. And for example, turn off push-ups, as in the photo below.

Control Panel

This situation is not related to the breakdown of your assistant, but is a consequence of haste or inattention.

What is the reason that the spin does not work?

There are several reasons for the lack of spin, not related to breakdown. These include:

• settings failure;
• disabling the spin cycle during the previous wash;
• uneven distribution of laundry in the drum;
• Drain filter clogged.

The first step is to check the spin mode settings. Perhaps it was turned off earlier and forgotten about it. Or for some reason the spin speed settings may have changed. The spin function must be turned on, and if it is on, increase the number of revolutions.

If the laundry in the drum is unevenly distributed, it becomes unbalanced. The machine evaluates this as a violation of the operating process and stops washing. As a result, the laundry does not go through the spinning stage and remains wet. If there is an imbalance in the drum, you need to turn off the machine, manually distribute the laundry, and start the wash.

It is recommended to clean the drain filter in your car at least twice a month . If this is not done, over time, the clog in the filter begins to interfere with the drainage of water. If the clog is severe, some of the water remains in the drum, so the laundry remains wet.

If the machine is set up correctly and its drain filter is cleaned, but there is still no spin, you need to look for the breakdown that led to this.

The most common causes are the following breakdowns:

• electronic controller malfunction;
• failure of the speed control sensor;
• drain pump failure.

Technical generator breakdown

A rare reason why the spin cycle does not work. Device malfunction occurs when the drum is frequently overloaded. If the loading rate specified by the manufacturer is regularly violated, this element may stop working in a short time. The tachogenerator is mounted on the shaft of the power unit and is designed to control speed during the washing process. If the sensor breaks, then the washing machine does not spin out the laundry; the rotation speed is not enough to perform this action.

Another reason for the malfunction of the tachogenerator is loosening of the contacts and wires leading to this element. To diagnose the problem, you need to check the fasteners and tighten them tighter.

Figure 6

If the wiring or adjacent contacts are damaged, they must be cleaned and taped. If the tachogenerator itself malfunctions, the part must be repaired or replaced.

User errors

Incorrect operation often leads to incorrect operation of the Indesit washing machine. The user sees that the device does not spin clothes and believes that the machine is out of order. In fact, a mode without a spin option may have been selected. In this case, the Andesit washing machine will wash things, rinse and drain the water, without turning on the spin cycle. To squeeze out excess water, you must select a program with a spin option.

Program selection

What to do if the machine does not spin? You need to check whether the option to operate the device at reduced speed is enabled. If the button that sets lower speeds is pressed, it may well be that the spin cycle will not start. The fact is that the laundry is wrung out at high speeds. When turning on low speeds, the unit understands this as disabling the need for spinning.

Spin does not turn off

Problems with the control module in the washing machine can result in the drum not stopping and the spin cycle not turning off. After such revolutions the car simply freezes. It may also be that the SMA squeezes, rinses, but does not wash. Or vice versa - it washes, but does not rinse.

All these signs indicate problems with the “brain” of SMA, so it begins to work incorrectly.

You can only visually inspect the control board yourself. It is better to entrust basic diagnostics and repairs to professionals.

• Unplug the washing machine.
• Remove the top cover.
• Pull out the dispenser tray. Pull it towards you, pressing the latch in the center.
• Remove the screws securing the control panel.
• Release the plastic latches and remove the panel.
• Release the wiring.
• To remove the board, also release the latches.

If no signs of damage are found on the surface of the board, contact the service center.

Monitor the condition of your washing machine

Be sure to take the time to carry out preventive maintenance with equipment. Don’t skimp on this; just a few minutes of your time will help extend the life of your assistant. After all, it is constant preventive actions that can extend the service life by more than one year.

After finishing each wash, the container into which detergents are poured and poured must be washed and wiped so that the remains of powder and conditioner do not accumulate.

Also, always wipe the washing machine drum itself and the elastic band in it directly to remove any remaining water, powder, and sometimes small objects from pockets and buttons get there. Do not close the door immediately; let the drum dry from the inside.

If the voltage in the electrical networks is unstable, then it is better to purchase a voltage stabilizer. Because constant surges in the network have a very negative impact on the state of technology.

Taken together, all these actions will have a positive effect and extend the life of your washing machine for a long time.

Put it? and subscribe to the channel so as not to miss new publications!

Read more information about washing here .

Repair

If the Indesit SMA does not press, then most likely one of its modules needs repair or complete replacement. However, it is not so easy to determine what exactly the malfunction is; you will have to check all the “suspects” one by one until the culprit of the breakdown makes itself known. And first of all, you need to inspect the drive belt.

It may seem that there is no connection here, but nevertheless there is one - when the belt does not provide a stable transmission of engine speed to the drum pulley, this leads to the fact that the drum cannot accelerate to the required speed . This will cause the program to freeze and completely stop spinning the laundry.

In order to check the performance of the belt, it is necessary to subject the SMA to partial disassembly, namely: disconnect it from the electrical network and other utilities and move it to a place where it can be easily approached from all sides. After this, you should carefully remove the back wall - this will give access to the drive belt. All you have to do is check its tension - it should be quite strong. If this part is clearly weakened and sagging, and signs of wear are visible on its surface, then such a belt must be replaced with a new one.

You can do this yourself - you need to grab the drum pulley with one hand, and the belt itself with the other and turn the pulley - the belt will come off almost immediately. After this, you need to take a new one, pull one edge onto the large pulley, the second onto the small one, and carefully turn the pulley, this time in order to tension the element.

If the belt is in order, then you can proceed to checking the tachometer. To do this you will have to perform the following steps:

• First, you should remove the drive belt so that it does not interfere with work;
• unscrew the large bolts supporting the motor;
• To check the operation of the tachometer, it must be removed and the contact resistance measured using a multimeter.

Then, depending on the data received, either its functional state is recorded or a replacement is performed. This item cannot be repaired.

And finally, you need to make sure that the engine is in good condition. First, you should unscrew all the bolts that secure the carbon brushes and carefully pull them out. If you notice that the plates are shorter than they were originally, they are worn to the limit and must be replaced with new ones.

Be sure to make sure that the motor winding is not electrocuted. Of course, this rarely happens, but such a malfunction should not be completely ruled out - with a broken winding, the motor will work poorly or not work at all. The only solution in such a situation would be to replace the motor with a working one, since winding repairs are quite expensive. The test is carried out using a multimeter, with one spike attached to the winding core, and the second one fixed to the housing. All cores must be checked, otherwise such monitoring will be of little use.

If you suspect that the electronic board has failed, it is better to immediately call a professional technician. Such a breakdown requires specialized repair, otherwise any amateur activity can permanently damage the unit.

In conclusion, we note that if the machine does not wring out the laundry, do not panic - most often the error is a consequence of violating the rules for operating the equipment. In order for it to fully perform the spin function, before starting the wash you should:

• make sure that the selected washing mode is correct;
• do not put more things into the tank than are provided by the manufacturer;
• Check the status of the spin button.

To learn why the Indesit washing machine does not spin, see the following video.

Frequent causes of spin system breakdowns, according to experts

According to professionals, the frequency of spin system breakdowns primarily depends on the model of the washing machine.

For example, for Samsung or LG models, malfunctions in the spin system may most often be as follows:

• the liquid does not drain to the drum, as a result of which the sensor turns off the spin cycle;
• the drain seems to work normally, but at the end of the wash the laundry remains damp;
• very low water drainage rate;
• spinning does not work properly.

Malfunctions of the tachometer can also cause the washing machine to stop spinning.

The next reason is interruptions in the operation of the sensor for fixing the drum.

The drum speed is regulated by a sensor mounted on the motor shaft. It records the revolutions per minute. If the wires are burned there, then the signal simply does not reach the automatic system. The number of revolutions does not change, and because of this it is impossible to wring out the laundry.

If the washing machine does not spin, then the reason may also be that the motor is not working.

The motor is the center of gravity and the heart of every technology. As a result of its malfunction, a short circuit or wire break may occur, which will directly affect the washing machine.

It is possible that the graphite brushes in the motor have worn out. If this is the case, you don’t have to worry yourself about trying to fix the machine, just invite a person from the service center.

Well, another common reason why a washing machine does not spin clothes is problems with the electrical module.

Many expensive models are equipped with an electrical module. The module is based on a stabilizer. If the stabilizer is faulty, this will cause the module to stop issuing the necessary commands. In this case, the drum rotates, but the spin mode does not work. Call the technician urgently, he will do the firmware or simply install a new stabilizer.

The drain pump is broken

The pump may fail while the machine is running. In this case, water will remain in the tank. The level sensor sends a signal to the control module, and spinning will not begin until the water is pumped out.

The pump needs to be replaced. You can do this repair yourself if you have the right tools and know how to do the work. You also need a pump that matches the brand used. The photo shows a frequently used pump in Indesit machines.

Drain pump

How to avoid problems in the future

In order to avoid problems in the future with the washing machine spinning poorly or not spinning at all, you need to follow a few simple rules:

• before putting the item in the drum, you need to clear the pockets of debris, coins, lighters and other forgotten items that cause clogging of the drain system;
• choose the mode carefully;
• do not overload the machine;
• use only high-quality powder;
• install surge protectors and promptly change (or clean) them.

Users starting to wash for the first time should carefully read the instructions and then strictly follow them.

How to avoid breakdown

• Be sure to read the manufacturer's instructions and follow them in every detail, down to the smallest detail.
• Spinning is characterized by high drum rotation speed. Therefore, it is especially important that the machine is installed on a perfectly level surface. This minimizes vibrations and shaking that are harmful to device parts, even at high speeds.
• Use only high-quality detergents for automatic washing machines. They are completely rinsed out and do not settle on various components, rendering the device inoperable.
• Do not turn on the spin cycle for woolen items. Firstly, it greatly harms the clothes themselves. And secondly, when the drum rotates quickly during spinning, the fibers intensively fall off from the wool. Accumulating inside the car, they lead to various malfunctions.

And one last important tip: if you find even subtle irregularities in the operation of the machine, stop using it and contact an authorized Midea service center. Otherwise, the problem will progress, and soon it will become much more difficult and expensive to solve.

The pressure switch is broken

Pressostat is a device for determining the water level in a tank. If it fails, the control module cannot determine whether there is water in the tank or not. The spin cycle will not start.

The level sensor needs to be replaced. It must be selected for a specific model. It should be noted that this is a very reliable washing machine mechanism and rarely breaks down. The photo below is shown with a red arrow.

Washing machine without top cover with pressure sensor

How to identify the problem?

You will have to look for a breakdown by checking each node one by one. It’s better to start with the simplest thing – checking the pump.

water pump

It is necessary to place the car on its side and disconnect all pipes and wires from the pump. After this, the cover is removed from the pump. Now you can check its status.

There may be two options here - the impeller is clogged or the pump electrics are burnt out . First you need to clean the impeller. It should rotate freely.

After this, use a multimeter to check the presence of resistance in the pump. If it is not there, then you need to buy and install a new pump.

After checking or repairing the pump, during reassembly, it is recommended to thoroughly rinse the pipes. This is done using a soft brush. You need to remove all accumulated mucus and dirt. This kind of prevention not only increases the wear resistance of the machine, but also eliminates unpleasant odors.

Tachometer

Let's say that checking the pump showed that everything is fine with it, but there is still no spin. The next action should be to check the tachometer . It is installed on the engine rotor. Its function is to control engine speed. You can get to it by completely removing the rear wall of the car or opening the service hatch in it. The engine is located under the tank, the tachometer is on the shaft.

To check, you need to remove the engine. First, the drive belt is released, then the mount of the motor itself is removed. All wires are disconnected from the sensor. Next, it is checked for resistance, which should be 60 Ohms.

If the resistance indicator is normal, before reassembling the machine you need to make sure that the bolt holding the tachometer is well tightened - the correct operation of the device depends on this.

Control module

Malfunction of the control unit is the most unpleasant option . If the verification procedures described above can be performed independently, then it is better not to touch the control module, but to immediately call a technician.

But if you have basic skills in working with boards, you can carefully test all available controllers one by one with a multimeter. This must be done without removing the module or disconnecting anything. The cost of incorrect reverse connection may be replacing the module with a new one.

It's easier to test controllers by simply testing them all. But you can do this using a pre-downloaded scheme. If the problem is not in the controller, but, for example, with some semiconductor part, you won’t be able to find it without a diagram.

Damage to shock absorbers and bearings

These products are used to dampen vibrations in the washing machine during washing and spinning. When they wear out, the device vibrates strongly, and the electronics do not spin the drum, and the spin mode in the washing machine does not work. It is also possible for the drum to knock on the body part.

If the bearings break, the seal gradually loses its tightness, liquid gets inside the products and washes out the lubricant. The bearings begin to rust and are destroyed by vibration. When the drum is shaken by hand, it dangles on the shaft. There may also be leaks on the outside of the tank. Bearings need to be replaced.

Typical breakdowns

If the washing machine does not spin, under any circumstances, even the separate spin function does not start, then most likely, some part in the machine is broken. Most often Kandy washing machines fail:

• drain pump;
• control module (more precisely, controller on the module);
• tachometer

The breakdown of any of these parts blocks the operation of the equipment, spinning does not occur. To identify the breakdown and fix it, you will have to stock up on time and tools. First of all, you will need screwdrivers and pliers, as well as a multimeter.

Troubleshooting

Troubleshooting is best started with the pump. In Kandy brand cars it is removed and installed through the bottom. To do this, you need to put the equipment on its side. Next, all wires and pipes that are held in place with clamps are disconnected from the pump.

For your information! After disconnecting the pipes from the pump, you can also wash them using a soft brush. This way, you will not only clean them of dirt and mucus, but also of unpleasant odors.

From the removed pump, first remove the cover and check the functionality of the impeller. If there is no hair or debris on it, and it rotates well, then proceed to checking the electrical part of the pump. Taking a multimeter, check the resistance of the part. If it burns out, then there is only one option - buy a new pump and install it to replace the old one.

After the pump, check the tachometer. It is installed on the motor, so this check procedure is quite justified. To do this, you only need to open the service hatch on the back of the case or remove the entire back cover. Below under the tank you will see the engine, on the shaft of which there is a tachometer. Before removing it, you must first remove the drive belt from the pulley and the engine, and then unscrew the engine and remove it from the machine.

Now we disconnect the wires from the sensor and measure the resistance, which normally should be 60 ohms. Pay attention to the bolt that holds the sensor. It should not hang out, otherwise the speed sensor will “glitch”. The replacement of this part is written in the article Tacho sensor in a washing machine.

Important! The motor sensor breaks down when the washing machine is overloaded with laundry. Therefore, never load your “home assistant” to the maximum, otherwise the laundry will stretch worse and the wear of parts will increase.

Perhaps the most problematic part of the Kandy washing machine is the control module. This is the electronic part of the washing machine, which is not so easy to check, especially if you have not encountered this and are a complete layman. If this is the case, then it is better to immediately call a specialist and entrust this work to him, since otherwise you can run into troubles that will result in significant expenses.

If you have at least a little knowledge of electronics and you have had to work with printed circuit boards, carefully check all the controllers you see for functionality using a multimeter. One of them is responsible for spinning. You can, of course, first download the module diagram and find out which part is responsible for what, but it is much easier to check and detect the malfunction at random. True, this will only work if the controller is really faulty, if there is a problem with a track or other semiconductor part, then a circuit will definitely be needed.

To summarize, we note that if the washing machine was working, working, and then “bang” - it decided to stop spinning, you need to immediately look for the cause of the problem. It is important to remember that a malfunction found at the wrong time leads to a trail of additional problems. And the longer we use a faulty washing machine, the more expensive the repair will be later.

Interesting:

• Bosch dishwasher errors
• Haier washing machine error codes
• Reviews of top-loading washing machines
• The washing machine does not spin well - what should I do?
• Ariston washing machine does not spin
• Miele dishwasher errors

1 reader comment

1. 01/24/2017 at 13:44

   Marina:

   Thanks a lot! Very useful article!

   Answer

Brushes are worn out

Expert opinion

I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.

Ask a Question

In fact, wear of the motor brushes is not a malfunction, since they wear down at a certain level and must be replaced. An air gap appears at the contact point, and the engine stops rotating. With average use of the Indesit washing machine, corresponding to 2-3 washes per week, replacement is needed after 10-12 years. That is, brushes are consumables.

Wear can only be determined visually. The job requires some skills. It is better to entrust it to a specialist. Master class on replacing brushes.

brush assembly assembly

Problems in the control unit

The electronic module of the Indesit washing machine is a small computer that controls all devices. With its help, the variety of modes inherent in modern machines is realized. In the current approaches of car manufacturers, if a module breaks down, it changes. Repair is not provided.

It should be noted that in our country there are professionals who repair these devices. There are not many of them, and they prefer to work with masters. You can diagnose the malfunction as follows - if you have excluded all the above reasons for the lack of spin, then the problem is in the control module.

Indesit washing machine control module

There are many reasons why the Indesit washing machine does not spin clothes. And some of them can only be identified by a repairman. Therefore, if you are unsure of your own abilities, then invite a specialist.

Why doesn't the Indesit washing machine spin and drain the water?

The age of the equipment is of great importance in identifying the causes of failure. If the machine is old, then the reasons may be of a different nature, but if it is new (1-3 years), then the emphasis in determining the source of all troubles should be placed on the typical problems of this brand of equipment.

To begin researching and repairing laundry equipment, you need to have a little understanding of how the drain system works.

All the water involved in the washing process enters a rubber corrugated pipe, which passes into the garbage filter. Having passed through it, the liquid is poured onto the pump impeller and, under the influence of pressure, passes into the sewer system through the drain hose.

As a rule, the hose is located inside the body of the device, and one end of it is connected either directly to the sewage system or to a siphon under the nearest sink. Sometimes the hose is not connected to any of the above and is simply led straight into the bathtub, sink or toilet for the washing period. A blockage that leads to equipment malfunction can be located in any element of the drain unit.

You should start diagnosing your washing machine by checking its filter. Even with regular cleaning of this element, a small crumpled piece of fabric (socks, baby clothes, handkerchiefs, etc.) can get there at any time.

The filter can also become clogged after frequent washing of wool and other fleecy fabrics or due to foreign objects falling out of clothing pockets during washing.

Indesit washing machine drain filter

Perhaps this is the reason why the Indesit washing machine does not drain water. After lifting the machine and tilting it back a little, it will be useful to place some container under it so that the water does not spill all over the floor after unscrewing the filter. Also, you should not try to open the hatch, this could result in a real flood.

You need to carefully remove the lid of the garbage filter, drain the stagnant water and check the drain pipe for the presence of foreign objects. Most often, the cause of breakdown of washing equipment is the filter clogging factor.

If nothing is found, then the reasons for the breakdown of the “home assistant” should be looked for in the following parts:

• drive belt;
• water pump;
• tachogenerator;
• engine;
• brushes;
• control module.

Then you should check the drive belt. The machine should be moved to a larger room, remove the rear protective wall and carefully inspect the internal elements. The drive belt is located between the large and small pulleys. Holding the first one with both hands, you need to turn it in both directions.

Drive belt of the Indesit washing machine

If the belt sags, then buying a new one is inevitable. The usual tightening of this element will only lead to temporary positive results, but after a couple of months the breakdown may recur.

The next part that needs to be checked for serviceability is the drain pump. Perhaps the reason for the unstable operation of the washing machine is a clogged rubber pipe on the drain pump, because any filter cannot guarantee absolute filtration.

How to get to the pump? First you need to disconnect the equipment from the power source, drain the water through the filter, remove the powder cuvette and place the washing machine on its right side.

Indesit washing machine drain pump

If the “washing machine” does not have a bottom, then this makes the task much easier (perhaps the parts just need to be cleaned of dirt). In cases where the bottom of the model is protected by a lid, it is worth twisting it with a Phillips screwdriver, and then prying up the tray with the sensor located behind the lid and disconnecting the wire from it. Then the pump is inspected for the presence of foreign objects and debris.

If the cause of the malfunction is not found, then we immediately check the pump. Problems with this part can be detected immediately if it emits a quiet hum from the depths of the washing machine. This will mean that the pump is clogged and cannot rotate (then the solution to the problem will be simply cleaning the part), or that the pump motor is faulty.

It's easy to get this item:

1. you need to remember or photograph the location of all the wires and rid the part of them. It is important to carefully inspect the wires, since a possible cause of failure may lie in a violation of their integrity;
2. loosen the ties on the hose and pipe and pull them off;
3. turn the pump counterclockwise and remove the pump;
4. carefully prying and removing the pump housing;
5. inspect the part for chips, worn gaskets or dirt. Frequent malfunctions of the pump indicate its imminent complete breakdown.

If, after eliminating all possible problems, the washer still refuses to work properly, then you should not give up, but on the contrary, the best solution would be to continue diagnostics.

There are known cases when the Indesit washing machine did not spin or drain the water due to an incorrectly connected, squashed or excessively long outlet hose, forcing the drain pump to work in increased mode. The hose should not be longer than three meters. If pressed or bent for a long time, a blockage or plaque may form in the tube.

The best solution in this situation would be to buy a new hose. Sometimes the cause of blockage is contamination of the pipe or siphon of the sewer system with threads, hair and other objects. To check the permeability of the drain hose, you need to blow into its end that is not connected to the machine and make sure that the air reaches the tank of the device.

Isn't that the reason again? Then you need to remove the wires from the motor, tighten the screws holding the motor and pull out the motor itself (first press, slide down, and then pull towards you). Find the ring-shaped sensor on the engine, remove it and check the resistance on it with a special device. If no deviations are found, then remove the brushes and check their integrity.

Indesit washing machine engine

If necessary, you can change both the tachometer and brushes. If a problem is found in the wires, it is more advisable to purchase a new motor.

The last cause of malfunctions in the Indesit washing machine may be the control board. But it is not recommended to go there on your own; it is safer and more economical for such purposes to give preference to calling a professional.