Top 10 best jackhammers, which jackhammer to choose?

The best electric jackhammers

The electric jackhammer operates on a standard 220 volt network. Its main advantage is the absence of additional elements in the system. You simply plug the tool into a power outlet and you can use it. True, there are also disadvantages regarding power limitations. Pneumatic hammers are more powerful and more economical, but due to a certain complexity in their work, they are more often used in production or large construction sites. At home, an electric hammer is the best option.

Electrical equipment

SOYUZ-PES-2520RB

An excellent option for people who need to perform dismantling work, but are not professional builders themselves. The cost of the device is quite affordable, but this jackhammer has decent impact power - this figure reaches 49 J. Electricity consumption is decent - about 2 kW / h, but the unit works efficiently. It is reliable and unpretentious in terms of use.

More: Top 10 best impact wrenches, how to choose a good impact wrench?

Using this tool, you can easily destroy old and dilapidated buildings, demolish the basement level, and even get rid of the underground part of the old foundation. The unit performed well during work preparing for the extraction of rocky soil; with its help, you can remove even a very frozen layer of soil and crush hard rocks, including sandstone. For maximum ease of use, the tool has an additional handle and a storage case is included.

Advantages:

• Affordable price;
• Convenient to work;
• The device is unpretentious to use;
• Wide range of applications;
• Long service life;
• Case for storage and transportation included.

Flaws:

• Consumes a decent amount of electricity.

Jackhammer SOYUZ-PES-2520RB

CALIBER Master OM-1700M

According to professional builders with extensive experience, an electric tool, by definition, cannot be more powerful than a pneumatic one. However, this model completely refutes this statement. We present to you a fairly powerful device, the impact force of which can reach 65 J - this is a rather serious indicator. The amount of electricity consumed is not very large: approximately 1.7 kW/h.

However, before purchasing, you should take into account that the developers would hardly have been able to achieve such power without increasing the overall dimensions and weight of the tool: the jackhammer weighs almost 25 kg. Because of this, it will be quite problematic to work with it without appropriate physical training, especially since the electric motor vibrates strongly. The device will easily destroy even a very thick partition made of reinforced concrete.

Advantages:

• High power;
• Acceptable energy consumption;
• Good manufacturing and assembly quality.

Flaws:

• Considerable mass;
• Strong engine vibration;
• It works very loudly.

Jackhammer CALIBR Master OM-1700M

Makita HM1203C

Chinese engineers have developed this unit in such a way that it is as convenient as possible for them to work in a vertical plane. The product is equipped with an original handle, which also changes its position. The power for this class of equipment is 25.5 J. This indicator allows you to make a recess or niche in the wall. This tool can even work in concrete, punching doorways there, and even in reinforced walls. It destroys brick or cinder block masonry almost instantly.

The weight of the tool is only 9.2 kg. The nozzle can be rotated if necessary; there is also the possibility of adjusting the number of revolutions. The handle has well-designed ergonomics, due to which most of the vibration is simply damped. Users claim that the tool, especially if it undergoes regular maintenance, will last a very long time.

Advantages:

• Decent power indicators of the device;
• Suitable for working in vertical planes;
• Low weight and low vibration;
• Possibility of adjusting the number of revolutions.

Flaws:

• It's quite expensive.

Jackhammer Makita HM1203C

Bosch GSH 5 CE Professional

The tool has compact overall dimensions - in size it is practically no different from a hammer drill, but with its help you can perform a wide range of work. The impact energy of the unit is not too high - only 8.3 J, but this does not in the least prevent the tool from quickly crushing concrete reinforced with metal reinforcement. Compact overall dimensions make the tool ideal for various interior work.

The noise level from the hammer is low - only 86 dB, which is comparable to a standard drill. German engineers have well thought out the vibration damping system through the use of an original spring-loaded handle. The number of blows is also adjustable if desired.

More: Top 10 best wood glues, how to choose wood glue?!

Advantages:

• The power of the equipment is quite enough for making grooves and removing old plaster;
• Excellent handle ergonomics;
• Ideal for interior work;
• Low weight of the device.

Flaws:

• Weak when working with foundation concrete.

Demolition hammer Bosch GSH 5 CE Professional

Makita HM1812

Truly the best electric jackhammer, with which you can easily dismantle even structures made of high-strength concrete. The tool is manufactured using AVT technology, which significantly reduces vibration of the unit. Thanks to this approach, working with such a device has become much more convenient - your hands practically do not get tired. It has a high-quality brushless motor that can work without interruption for several hours.

This device is much more productive compared to other products, which plays an important role when performing significant volumes of work. In addition, a soft start system is installed here; at idle, the engine rotates smoothly, which greatly increases the service life of the hammer and makes the work more accurate.

Advantages:

• High-quality protection against overheating;
• Reduced vibration level;
• You can work without a break even throughout the day;
• There is a soft start system.

Flaws:

• Except for the high price not found.

Jackhammer Makita HM1812

The best pneumatic jackhammers

A pneumatic jackhammer is powered by compressed air, which pushes the tip of the tool under very high pressure. To provide this pressure, a compressor is needed, and its size directly depends on the power of the tool. Simply put, you will not be able to connect a powerful hammer to a small compressor with a low-capacity receiver and work. You will need an industrial device. All this makes it almost impossible to use pneumatic tools at home, and there is no need for them if you do not plan to break concrete piles or FSK.

Pneumatic devices

Concorde (CD-MO-3)

The configuration of this device is quite standard, but this did not at all affect the power of this equipment. At the same time, the cost of this equipment is quite reasonable. The case is made of reliable metal; when folded, the device takes up a minimum amount of space, so it is very convenient to store. The assembly is excellent - all parts of the device fit tightly together, no gaps were found. The housing reliably protects the internal elements from dust penetration.

The handle of the device is ergonomic and covered with a layer of special rubber. This approach reliably protects the tool from slipping. The capabilities of the tool are quite good - it will cope perfectly with any material in both the vertical and horizontal planes. The device can be used for a long time without interruption, it does not overheat and does not need rest.

Advantages:

• Reasonable cost;
• Excellent workmanship and assembly quality;
• The handle is ergonomic;
• Long period of operation.

Flaws:

• It works very loudly;
• There are no additional functions provided here.

Jackhammer Concorde (CD-MO-3)

SUMAKE ST-2200A/H

These products were developed by engineers from a well-known Chinese company that manufactures both pneumatic and electric tools for home and professional use. This jackhammer is quite convenient to use in both horizontal and vertical planes. High quality components and assembly ensure a long service life of the tool.

The engine start button is located on the body, right under the thumb, which is very convenient. This tool can be used with one or both hands. Despite the very compact overall dimensions of this unit, it allows you to provide a decent impact force - about 10 J.

Advantages:

• The shape of the handle is original, but quite convenient to use;
• Reliable housing for ease of operation;
• Long service life of the unit.

Flaws:

• The power is rather weak for working with full reinforced concrete.

Jackhammer SUMAKE ST-2200A/H

Wester MH-10

The products of this company are in no way inferior in their characteristics to other similar devices, and this model is no exception. The main distinguishing feature of the tool is its compact overall dimensions. This allows you to use it almost anywhere you need it. The impact force of this jackhammer is low - it is only 4 J, however, this is quite enough for working with various materials.

More: TOP 10 best alkyd paint manufacturers

The chipper operates using compressed air; in the absence of loads, the tool is capable of delivering about 3.6 thousand blows per minute. The body is entirely made of reliable metal; in the area of ​​the handle there are rubberized inserts that do not allow the tool to slip out of the palms.

Advantages:

• The most compact among all jackhammers on the Russian market;
• The operating speed is 3.6 beats per minute;
• Reasonable cost;
• The case is high quality - metal.

Flaws:

• The impact force is low, so you will have to work with concrete for a very long time.

Jackhammer Wester MH-10

ARCHIMEDES MW510

A fairly simple, completely standard design that does not particularly stand out among its competitors. The only exception in this case is the impact force, which can reach 45 J, as indicated in the instructions, but in fact this figure is much higher. The shape of the handle has nevertheless undergone certain changes, as well as the design and location of the tool's start button. Thanks to such solutions, using the device has become much easier and simpler.

This model is housed in a high-quality dust-proof case that can withstand significant physical stress, including a fall from a decent height. The control system here is mechanical, reliable, and does not break down during operation.

Advantages:

• Convenient handle shape and start button location;
• The impact force is much higher than indicated in the accompanying documentation;
• The case is well protected from dust and moisture;
• The mechanical tool control system almost never fails.

Flaws:

• The cost is a little high;
• The thin layer of plaster that needs to be removed from the wall penetrates through and can damage the base.

Jackhammer ARCHIMEDES MW510

Bison “Concrete Breaker” (1600 W)

In first place in this section of our rating of the best jackhammers, we decided to place professional products of domestic production. Its main distinguishing quality is the ability to dampen strong vibrations that are created during the operation of this tool. Several damping stages are located in the tip area of ​​the device, as well as in the area where the tool is connected to the compressor. Using such equipment is very convenient and comfortable; your hands do not begin to get tired even after several hours of active work.

To achieve such a result, the manufacturer had to sacrifice somewhat the total power of this device. For pneumatic products, it turned out to be not particularly high - only 35 J, which, with a tool weight of 17 kg, is really quite modest.

Advantages:

• Reliable device;
• Vibration is minimized;
• Excellent workmanship and assembly quality;
• Does not require special maintenance.

Flaws:

• Low power with significant weight.

Jackhammer Bison “Concrete Breaker” (1600 W)

How the tool works

The main feature of the bumper is that during the working process it produces a blow of great force . For this type of tool, an important characteristic is the impact energy. When calculating it, the number of blows worn per minute of working time is taken into account, as well as the energy generated over the same time period.

Modern fenders have a fairly simple design. The firing pin located inside the body makes oscillatory movements thanks to the existing drive. The mechanical impulses arising during its operation are transmitted to the working part of the tool - the peak, which makes rapid reciprocating movements, due to which the destruction of the material is ensured.

When working with a tool, a rather rough energy is generated, due to which the master has to feel strong vibration and noise. To reduce the manifestation of these impacts, you need to start working with the bumper after first taking the necessary protective measures.

The electric version of the bump stop works a little differently. Here, too, the design has a striker driven by a rotor, which is forced to rotate by an electric motor. The mechanical movements performed by the striker are transmitted to the pike. Although this tool is one of the most popular not only among professional builders, but also among home craftsmen, it has a number of significant disadvantages . During operation, the electric motor may produce a spark, so operating an electric breaker in areas with increased fire safety is prohibited. Another disadvantage is the need for a power source.

Criterias of choice

There are three main criteria that are taken into account when choosing an electric jackhammer:

• Weight.
• Power.

• Impact force.

Expert opinion

Levin Dmitry Konstantinovich

These parameters will seem familiar to those craftsmen who have previously purchased hammer drills. The operating principles of these tools are similar to each other. The only difference is that the bumpers do not have a drilling option.

Weight

Jackhammers are presented in stores in three weight categories:

1. Lightweight (up to 5 kilograms) . Designed for simple work and low-strength materials. Due to their weight, they are suitable for dismantling horizontal planes. Such tools are taken for construction work that requires long-term involvement. The master's hands do not have time to get tired.
2. Medium (from 5 to 10 kilograms) . Both household and professional tools fall into this category. Used for processing hard surfaces - concrete, brick, asphalt, etc.
3. Heavy (from 10 kilograms) . Devices of this group are often called concrete breakers. But in practice, these hammers are universal - their wide functionality allows you to perform tasks of all levels of complexity.

It is not practical to rely on the idea that the greater the weight of the device, the more reliable it is. The weight of the hammer must be selected in such a way that the device is suitable for the working conditions. For example, a heavy and large bumper is not suitable for working in a narrow space between doors. It is also not suitable for working in a horizontal position.

Power

The performance of an electric jackhammer is determined by three interrelated parameters:

• Power.
• Impact force.

• Frequency of reciprocating movements.

The power of the tool affects the duration of its continuous operation and the size of the equipment that the device supports. Increased power leads to increased performance and vice versa. The jackhammer market offers different models with a power range from 500 to 2,000 watts.

Each material implies its own mode of operation and its own power. Household electric hammers do not require more than 1000 watts of power.

Impact force

The impact force is indicated for each model in Joules. As force increases, the range of materials a hammer can handle expands. High values ​​of this criterion are typical for instruments in the heavy category. Light hammers will not cope with high power, which will be disproportionate to their configuration.

For “heavyweight” jackhammers, the force of a single blow reaches 60 J (for the most advanced models). For light models, these figures decrease significantly and are cut to the level of 3 – 8 J.

Additional functions

What weight category of electric jackhammer do you use?

LightMedium

Electric jackhammers are selected not only on the basis of power indicators. Secondary technologies that accompany the operation of the device are also important.

Such technologies include:

• Impact frequency adjuster . The system is responsible for switching hammer modes based on immediate tasks. Usually regulation is carried out using a button or wheel.
• Power button lock . The mechanism prevents the device from turning on without permission during the process of crushing materials. With this function, the technician does not need to constantly keep his finger on the button. In some models, the button is replaced by a slider.
• Starting current limiter . Installed on high-power devices. The purpose of the system is to prevent power surges when equipment is turned on.
• Anti-vibration system . Prevents tool vibrations in the hands of the master with the help of dynamic counterweights. For the same purposes, hammers are equipped with rubberized handles, inserts and overlays.
• Monitoring carbon brush wear . The indicator is installed on selected models and keeps the hammer owner aware of the condition of the brushes. When wear becomes critical, the tool switches off automatically, protecting the engine.
• Control panel . Contains indicators that inform the technician about the quality of the device. The panel notifies the owner in cases where the tool is worn out or in need of repair or maintenance.

Expert opinion

Levin Dmitry Konstantinovich

Electric jackhammer bodies are made of metal or plastic. The latter option is used more often due to its lightness and low cost. When choosing a plastic model, it is important to make sure that it was made from a high-strength type of material.

Impact frequency

Impact frequency is just as important as force. The higher this indicator, the greater the amount of work it can perform. Also, to some extent, a high impact frequency can compensate for low force. For example, with a low impact force, a lance is not capable of beating off large pieces of material in one pass, but at high speeds, productivity increases significantly.

However, remember that high impact speed (frequency) does not replace force. For example, it is pointless to try to chisel the asphalt with a chisel with a strike force of 15 J. Therefore, when choosing a model, consider both of these parameters. The domestic jackhammer Diold MEO-1 .