An immersion pancake maker is a practical technique for preparing pancakes, which will be useful for every housewife in the kitchen. This device allows you to cook much faster and more conveniently than conventional frying pans. It is powered from the electrical network and is suitable for use in the country. In this article we will tell you how to use an electric pancake maker correctly.
An immersion pancake maker is a practical technique for preparing pancakes, which will be useful for every housewife in the kitchen.
What are the types of electric pancake makers?
Pancakes are an original Russian national dish that can be eaten with honey, sour cream, jam, or wrapped with a variety of fillings in dough strips and eaten with tea or milk. The tedious and long standing in front of a hot frying pan reduced the desire to cook this tasty dish, but manufacturers of electric pancake makers came to the rescue of housewives. Many are interested in this innovation and ask the question: what is a pancake maker? The electric pancake maker is a new word in baking pancakes and American pancakes. There is no need to stand over the stove, wait for the pancakes to cook in a hot frying pan, and not be afraid that they will stick and burn.
With this electrical equipment, you can bake a huge stack of even and beautiful pancakes, which are evenly fried on both sides. These dough products will be the same thickness and diameter, since the pancake maker itself will take the right amount of dough and ensure uniform heating, which guarantees the same frying of the pancake. No more burnt, dry edges and undercooked centers.
The pancake maker itself will take the required amount of dough and ensure uniform heating, which will ensure that the pancake is cooked evenly.
The device is a bit like a frying pan, but is heated by electricity. The bottom of the unit has a convex surface, which must be completely lowered into the kneaded dough. The unit is designed to bake one pancake in 40 seconds with a diameter of 20-25 cm, that is, in half an hour you can bake a huge plate of delicacy.
What is the difference between submersible pancake makers and frying pans?
Many users note the differences between the electrical appliance and a regular frying pan:
- The weight of the pancake maker is small - it is easy and simple to prepare and care for;
- Uniform baking of the dough due to a high-quality heating element;
- The submersible element ensures the baking of thin pancakes;
- Can be cooked without using oil;
- The dough does not drip onto the stove, which inevitably happens when cooking in a regular frying pan when scooping the dough with a ladle;
- Pancakes cook quickly, and the appliance itself is much easier to clean than a frying pan;
- You can cook the most complex types of pancakes.
The submersible element ensures the baking of thin pancakes.
Advantages of a submersible electric pancake maker
An electric submersible pancake maker, like all kitchen appliances, has its pros and cons. Main advantages:
- Even a child can bake pancakes;
- Absolutely safe design;
- There is no need for gas access to the device;
- Uniform frying of the dough over the entire diameter;
- The device is much more functional than conventional frying pans;
- The high-quality non-stick coating is easy to clean and allows you to cook without using oil.
The high-quality non-stick coating is easy to clean and allows you to cook without using oil.
How to use an electric submersible crepe maker
This unit is always accompanied by instructions for use and a list of recipes. But there is always the opportunity to try to cook something new using your own recipe. The most important thing is to take into account that the thicker the dough, the thicker the pancake will be. So how to use a pancake maker?
The most important thing to consider is that the thicker the dough, the thicker the pancake will be.
Master class for the user of an electric pancake maker:
- Knead the liquid mass;
- Plug in the power socket of the unit and wait five minutes; as soon as the surface heats up (this will be indicated by the device indicator), you can start baking;
- The device will maintain the temperature automatically, you won’t have to set it manually;
- Dip the side of the electric pancake maker into the mixture for 3 seconds so that this side can take the required amount of mixture for baking (as standard, there is a spoon for the required diameter of the pancake);
- In one minute the first pancake will be baked (it is better to see the exact baking time for the plates in the attached instructions);
- The dough is baked on both sides simultaneously, if you like lacy, browned “suns”, you can turn the layer of pancake over to the other side and wait another 5-10 seconds;
- The dough plates are removed very easily: you need to pry them off on one side with a spatula and turn the unit over onto a prepared plate;
- After baking all the dough, you need to wait for the pancake maker to cool completely and wipe it clean with a damp cloth or paper napkin.
The dough plates are removed very easily: you need to pry them off on one side with a spatula and turn the unit over onto a prepared plate.
Benefits of using a pancake maker. Features of submersible type
After the invention of non-stick coating, manufacturers also came up with electric devices for frying pancakes. They resemble a small electric stove. Baking on it follows the principle of frying pancakes in a frying pan: you need to grease it, pour the dough into the cavity and wait until it is ready. Such devices speed up the culinary process and also allow you to make pancakes of uniform thickness and even shape.
Then the inventors took a step further and came up with a submersible pancake maker. With its help you can bake pancakes even faster and easier. Mastering the nuances of cooking with this technique is as easy as shelling pears. The pancake pan looks like a convex frying pan.
The curved part is the element on which the dough will be applied. It is a surface that is provided with heat by a heater hidden inside. The main difference is in the frying principle: you do not need to pour the dough on top. The pancake maker is lowered into a bowl of liquid for a second, removed, turned over, and then bakes the pancake until cooked.
Attention! This technique is very popular overseas. Pancakes from a submersible machine are especially thin. After frying one side of the pancake, turn it over to the other with a spatula and continue the process. However, it is not necessary to bake the reverse side.
The pancake baking process takes 20 seconds. True, you won’t be able to cook more than one per serving, as is the case with a classic electric pancake maker. But submersible is especially valued by adherents of a healthy diet and fighters against cholesterol in the diet for the following reasons:
A pancake maker helps make very thin pancakes
- no fat is used during the frying process; it is enough to wipe the surface with cotton wool soaked in oil before turning on the unit;
- You can use it to make pancakes using rice dough.
What else can you cook besides pancakes?
An immersion frying pan for pancakes is useful not only for baking rosy “suns”, but also for many other delicious delicacies. Every good housewife should know some of them:
- Classic thin pancakes;
- By leaps and bounds;
- On kefir or yogurt;
- Squash;
- Apple;
- Corn;
- Banana-oat;
- Rice;
- Cottage cheese;
- Carrots;
- Cheese;
- Chocolate;
- American pancakes.
An immersion frying pan for pancakes is useful not only for baking rosy sundaes, but also for many other delicious delicacies.
JIQI Electric Immersion Non-Stick Pancake Pan
Another worthy option for an immersion pancake maker for your kitchen. A thoughtful design, a long and comfortable handle that fits perfectly in the hand and does not slip, and a switch that quickly switches the device from working to non-working.
JIQI Electric Immersion Non-Stick Pancake Pan
A distinctive feature of this model is a unique non-stick coating that can be easily wiped with a damp cloth. If splashes get on the frying pan itself, nothing bad will happen - it will simply drain from it and will not leave any traces behind.
As a gift, you will receive a bowl for preparing dough, as well as a convenient whisk, which will allow you to quickly turn food into a tender dough, from which even a novice housewife can bake delicious pancakes. And not one of them will burn or turn out to be lumpy - this has been tested by numerous buyers of this device.
GO TO STORE
Submersible crepe maker: safety precautions
To ensure safe use of the device, you must adhere to the following rules:
- It is forbidden to touch hot equipment, otherwise you will get a thermal burn;
- During baking, the pancake maker must be held by the handle also to avoid burns;
- After baking or to temporarily stop cooking, you must disconnect the unit from the electrical network;
- Small children should not be left alone with the pancake maker on;
- When cooking, you must avoid getting moisture and drops of water on the electrical appliance, otherwise a short circuit may occur; if drops get on the unit, immediately turn off its socket from the network;
- If drops of water get on an unconnected appliance, you cannot use it; you can start baking after the surface has completely dried;
- If the device gets wet, you can turn it on only after contacting the service center;
- You cannot pour any liquid into the unit to avoid an unintentional short circuit; otherwise, you must immediately take the device to a specialist and not use it during this time;
- Do not place the appliance on a hot plate or oven;
- The unit cord should not reach sharp objects or a hot stove;
- You cannot use a pancake maker with a damaged cord; you must take it to a workshop or service center;
- Turn off the device from the network, wait until it cools down and only then clean and wash it with a damp cloth or paper towel;
- If the surface is extremely dirty, you can wash it with warm water, a soft sponge and detergent, after unplugging it.
After baking or to temporarily stop cooking, you must disconnect the unit from the electrical network.
Tips for use
The submersible pancake maker works simply and quickly. It must be installed on a flat and dry surface. Make sure the cord is long enough to reach the outlet. If necessary, you can use an extension cord.
- Plug in the device and heat it to maximum temperature.
- Pour the pre-prepared dough into the bowl.
- Dip the convex part of the electric pancake maker into it and wait 3 - 5 seconds.
- Place the device on the table.
- Wait until the pancake is completely cooked on one side, then turn it over and bake until cooked on the other side.
In total, it takes no more than a couple of minutes to prepare one pancake. Under no circumstances should the device be washed under the tap, immersed in water, or put in the dishwasher. The only way to clean is to wipe the surface with a damp towel. An electric submersible pancake maker should be stored separately from other kitchen appliances to prevent scratches.
Tags: Maslenitsa
Types of models of submersible electric pancake makers from various manufacturers
The kitchen utensils market has its own leaders in sales of electric pancake makers.
Delimano PancakeMaster. The device, made in Italy, is completely black with a non-stick, environmentally friendly ceramic coating patented in Switzerland. This is a very light pancake maker that does not take up much space. It bakes the thinnest pancakes, and its unique ability is to bake “suns” with crispy edges, which are obtained in an ordinary cheap cast-iron frying pan. But there is a drawback - wires. The kit itself includes: instructions for use, a pancake maker and a container for dough.
The device, made in Italy, is completely black with a non-stick, environmentally friendly ceramic coating, patented in Switzerland.
Leomax Provance. The device comes from Russia, black. The surface itself consists of a two-layer ceramic, below is an alloy of pure metals. A special feature of the unit is the presence of a heating stand that is connected to the electrical network by a cord. And the baking surface itself becomes a wireless pancake maker, similar to the design of an electric kettle. There is a minus - the pancakes take a long time to cook.
A special feature of the unit is the presence of a heating stand that is connected to the electrical network by a cord.
Ves ska3. A cheap pancake maker made in China, beige in color, with a convenient wireless surface for baking and the ability to fully rotate the surface around its axis. The bottom has a good Teflon non-stick bottom coating. The handle of the unit has an indicator for heating the required temperature, which is very convenient. There is also a power off button. The peculiarity of this particular model is that the body of the pancake maker does not heat up, and the bottom is equipped with non-slip rubber feet. But there is a minus - the pancakes come out dry and too crispy.
The handle of the unit has an indicator for heating the required temperature, which is very convenient.
How to choose a pancake maker
Arriving at a large household appliances store, every housewife will be faced with a fairly large assortment of goods. Electric pancake makers can vary significantly in both price and parameters. Taking into account every little detail will help you get a device of excellent quality that meets all your needs.
One of the main factors when choosing is price. Among the inexpensive models of electric pancake makers are Vitek, Scarlet and Dexp. These manufacturers have proven themselves well in terms of price-quality ratio. More expensive and well-known manufacturers of household appliances, such as Tefal and LG, charge more for their pancake makers.
Despite the important factor of price, it is necessary to take care of your health. That is why the next point when choosing equipment is its safety. You must ask the seller to turn on the selected device to ensure that it is fully operational. Also, at the time of testing, it is important to pay attention to whether parts not used during frying heat up - in further operation you can get quite significant burns.
Important! The device must be equipped with a power button. Its absence is inconvenient from a fire safety point of view.
The device must have a separate power button.
The next aspect when choosing is the power of the pancake maker and the quality of its frying coating. The energy consumption level of most models is at the level of 800-1200 watts. With equal sizes, it is worth giving preference to devices with more powerful heating elements. A high-quality non-stick coating is the most important part of a pancake maker. The better its composition, the longer the device will last. Other factors include the following:
- the ability to use replaceable frying surfaces for 2.4 or more pancakes;
- presence of a thermostat;
- separate power cord;
- rubberized handles for stability of the device;
- ease of transportation and storage.
Experts recommend purchasing pancake makers with removable surfaces. This is due to the easier washing process. Appliances with non-removable surfaces cannot be wet, so significant problems may arise in the future.
How to care for an electric submersible crepe maker, how to wash submersible crepe makers
Manufacturers advise washing such a device when it is extremely dirty, and after each baking simply wipe it with a damp cloth or paper towel.
If the surface is very dirty, you can wash it with warm water and detergent, a soft sponge, but without using metal brushes. Then dry with a towel.
Do not wash the unit under running water or soak it in the sink. Also, do not allow moisture and soap to get inside the body of the pancake maker.
Do not wash the unit under running water or soak it in the sink.
An electric pancake maker is a real find for lovers of golden brown pancakes. Baking will not take much time and will free you from long standing at a hot stove with a spatula. In half an hour you can bake a whole plate of smooth and amazingly tasty pancakes.
